Many users, when first encountering Xiaomi’s budget smartphones, often wonder where exactly the Xiaomi Redmi 9 has a memory card slot.This is not just an idle curiosity, but an urgent need, given that built-in storage of 32 or 64 gigabytes may not be enough for modern applications, heavy games and thousands of high-resolution photos.
Unlike older models, where the lid was removed in one motion, modern smartphones require a more delicate approach to removing the tray. Wrong actions can damage the case or the drive itself. SIM-maps, explain how to correctly identify the desired connector and avoid typical errors when installing a MicroSD.
It is worth noting that the Redmi 9 uses a hybrid slot, which means the possibility of installing either two slots. SIM-Understanding this feature is critical before any iron manipulation, because trying to insert two SIMs and a flash drive at the same time is physically impossible and will lead to breakage of contacts.
Design features of the SIM tray and memory
First, you need to visually view the ends of your smartphone. In the Redmi 9, Xiaomi engineers have placed all the necessary connectors on the bottom of the device, next to the Type-C charging port. This is where the narrow hole surrounded by a metal frame, which is the entrance to the storage system, is located.
The tray is a thin metal or plastic plate that is pushed out by mechanical action, and inside it there are special notches that are shaped in strict accordance with the geometry of the cards. SIM-cards are standardized, but their location in the tray may differ depending on the regional version of the smartphone.
- 📱 The main compartment is usually designed for the main SIM-map and has a shape that repeats the contours of the chip.
- 💾 The second compartment is often combined and can accept either a second SIM or a memory expansion card.
- 🔍 On the tray itself, microscopic pictograms are often applied, indicating which angle to insert.
⚠️ Warning: Never try to insert a memory card into a slot by force. If it does not enter easily, then you have chosen the wrong angle or mixed compartments.
Special attention should be paid to the orientation of contacts. In most cases, the gold pins of the card should look down to the motherboard, but in some revisions of Xiaomi trays, there is also a reverse arrangement. Before final installation, always check with the icons on the metal frame.
Necessary tools for removing the tray
The right tools must be prepared before you can physically impact your smartphone. Using inappropriate items is the main cause of damage to the body and internal mechanisms. The standard Xiaomi Redmi 9 usually includes a special key, but it is often lost or thrown away with the box.
If you don't have a branded paper clip, you can use alternative tools that are available in every home, and the main requirement for the tool is that it must be thin, durable and have a blunt end, so as not to pierce the internal components when you dive deep into the hole.
The safest option is a paper clip that is straightened to the desired shape, rigid enough to activate the spring mechanism, but not sharp enough to damage electronics, and the use of knives or sharp sewing ignes requires extreme caution.
- 🔧 Special key-clip from the delivery kit - the ideal option.
- 📎 Regular paper clip is the best available alternative.
- 🪡 Thin sewing needle - permissible, but requires accuracy due to sharpness.
It's not recommended to use toothpicks or matches, and the tree can split inside the hole, and it's very difficult to remove the debris without disassembling the phone, and the plastic is also not suitable, because it just bends under the pressure of the spring.
Step-by-step instructions: how to get and install a map
The process of installing a memory card in Redmi 9 takes less than a minute, if you know the sequence of actions. First, make sure that the smartphone is turned off. Although modern phones support hot replacement, it is better to manipulate the device that is turned off to correctly determine the file system and avoid software failures.
Find a small circular hole on the bottom end. Put the tool (clip or key) perpendicular to the surface of the case. Press moderately until the characteristic click and easy extension of the tray. Don't be afraid to press a little harder, the mechanism is designed to do so.
☑️ Pre-installing check
Once you've removed the tray, you'll see two or three indentations. To install the MicroSD, place the card in the appropriate compartment, making sure it fits tightly to the bottom of the notch, then gently insert the tray back into the phone, keeping the orientation.
It's important to insert the tray on the same side that it was removed, and if you flip it over, it won't come in until the end, and you can damage the sealing gum, which is responsible for protecting against dust and moisture, and press it on the tray until it equals the body.
| Action. | Description of the process | Important detail |
|---|---|---|
| 1. Preparation | Turning off the smartphone | Data protection |
| 2. Extraction | Pressing the paper clip in the hole | Perpendicular to the body |
| Installation | Placing MicroSD in the tray | Contact down. |
| 4. Finals. | Putting the tray back in | Before the snap of the fixation |
Configuring and formatting the drive
After the phone is turned on, the system MIUI It will automatically detect a new storage device. You may notice that you need to configure it on the screen. SD-If this does not happen, go to the Settings menu, then select About Phone or go straight to Warehouse via the Settings search box.
The system will offer two uses: as a portable storage device or as internal memory. The first option allows you to store photos, videos and music that will be available even when you connect the card to another device. The second option turns the flash drive into a part of the system, encrypting data, but making the card unreadable on other phones.