Gallery requires permission to access SD-Xiaomi Redmi 10 map: what to do?

You put it in. SD-The card in your Xiaomi Redmi 10, but the gallery insists on asking permission to access files? Or the photos on the memory card simply do not appear, although they are visible in the file manager? MIUI You can do it 90 percent of the time without resetting, but you have to understand why.

The fact is that Android and MIUI Sharing access rights to external storage (SD-The gallery, as a system application, must be given separate permission to work with files on the map - even if you have already granted all rights during installation. Sometimes this process gets confused due to cache failures, incorrect map formatting, or conflicts with settings. MIUI. Below we will discuss all working methods - from elementary to radical.

Why does the gallery ask for access to the SD-map on Redmi 10?

The reasons can be divided into two groups: software failures and hardware limitations: in the first case, the MIUI settings, application cache or file system errors are to blame; in the second, physical problems with the memory card or its incompatibility with the smartphone.

The most common reasons are:

• 🔄 Update MIUI — After the update, some application permissions are reset, including access to the SD-map.
• 🗑️ Contaminated cache of a gallery or media scanner, which makes the system unable to read files correctly.
• 📁 Incorrect map format – Redmi 10 works best with exFAT or FAT32, NTFS can cause errors.
• 🔒 Protection MIUI — In some regional versions of the firmware, access to external drives is limited by default.
• 🛠️ Damaged files on the card (for example, after being retrieved during writing).

If the problem occurs after the system update, try to restart your smartphone first — sometimes it helps to reset temporary locks.

Method 1: Manually grant permission through settings

The most obvious but often ignored step is to check the permissions for the Gallery app. Even if you already clicked "Allow" in the pop-up window, the settings could reset.

How to check:

1. Open Settings → Applications → Application Management.
2. Search for Gallery** (or Google Photos if you use it).

If the option is unavailable or gray, then the problem is deeper – perhaps the memory card is not recognized by the system as a removable drive (more on this below).

Method 2: Clearing cache and gallery + media scanner data

Cache applications and system media scanner often causes failures when reading SD-Cleaning up this data will cause the system to re-index the files, which can solve the problem.

Instructions:

1. Go to Settings → Applications → Application Management → Gallery.
2. Click Clear Cache, then Clear Data (Warning: This will remove gallery settings, but not photos!).
3. Go back to the app list, find Media Storage, and clear its cache as well.
4. Restart your phone and wait 2-5 minutes – the system must re-scan files.

⚠️ Note: If after cleaning the cache of the photo on SD-You've lost the map, don't panic. Wait 10 to 15 minutes, they'll show up after you index them again!

If this method doesn’t work, try to force the media scanner to restart:

adb shell am broadcast -a android.intent.action.MEDIA_MOUNTED -d file:///storage/XXXX-XXXX

(substitute XXXX-XXXX on the real path to yours SD-A map that can be found through the file manager).

Method 3: Formatting SD-maps in the right format

Redmi 10 officially supports memory cards up to 512 GB, but only in FAT32 or exFAT formats. If your card is formatted in NTFS (often with cards from cameras or PCs), the gallery will not be able to work with it correctly.

How to check and correct:

• 📱 Through phone: Go to Settings → Memory. → SD-map → Format it as internal (or portable). Attention! This will remove all data from the card.
• 💻 Through PC: Connect the card to the computer, right-click → Format → Select exFAT (recommended for cards) >32 GB) or FAT32.

⚠️ Note: If you format the card as internal memory in your phone settings, it cannot be retrieved without losing data. Use this mode only if you are sure that the card will be permanently on your phone.

Method 4: Verification SD-misscard

If the memory card is damaged (for example, after improper extraction or power failure), Android can block access to it, you can check this through a PC or special applications.

Instructions for Windows:

1. Connect. SD-card to the computer through the card reader.
2. Open the Command Prompt on behalf of the administrator.
3. Enter the command: chkdsk X: /f /r (where X is your letter SD-map).
4. Wait for the check to be completed and reconnect the card to the phone.

For Android, you can use apps like SD Card Tester or A1 SD Bench to check the map for broken sectors and read/write speed, and if the test shows errors, the card should be replaced.

Method 5: Use of an Alternative Gallery

If the system gallery MIUI They refuse to see the files on the SD-You can try the side of the app, and they often bypass the limitations. MIUI And they're more stable.

Best options:

• 🗃️ File Manager+ — Not only does it show files, but it also allows you to manage them directly.

How to set up:

1. Install the selected application from Google Play.
2. Open it and give access to memory when requested.
3. In the application settings, find the option Media Scanner or Show Hidden Files and activate it.

Even if third-party galleries can’t see the files, the problem is most likely the physical condition of the card or its incompatibility with the phone.

💡

Before installing an alternative gallery, check out reviews about its work with MIUI – some apps may conflict with the Xiaomi shell.

Method 6: Reset application settings (without data loss)

If none of these methods worked, try resetting all the apps, which will return the permissions to factory values, but won't delete your files or accounts.

How to do this:

1. Go to Settings → System → Resetting settings.
2. Select Reset App Settings (not to be confused with a full reset!).
3. Confirm the action and wait for the reboot.
4. Once the phone is turned on, re-access the gallery to the SD-map.

⚠️ Note: This method will reset all of your individual application settings (notifications, permissions, cache) but will not affect your photos, contacts or messages.

Method 7: Radical measures – resetting your phone or replacing your card

If all previous methods have failed, there are two options:

1. Hard reset phone (full cleaning) This will remove all data from internal memory, but often resolves deep software conflicts, only if other methods have not worked.
2. Replacement SD-If the card is old, slow (class below) UHS-I U1) Redmi 10 can block access to it, modern smartphones are demanding speed of reading / writing.

How to reset your phone:

1. Back up important data (photos, contacts) on your PC or in the cloud.
2. Go to Settings → About Phone → Resetting → Delete all data.
3. After restarting, set your phone as new and check it with SD-card.

If the problem persists after the reset, the probability is 95% to blame. SD-Try inserting it into another phone or buying a new one (SanDisk Ultra or Samsung recommended). EVO Plus class class A2).

💡

Before buying a new one SD-Check its compatibility with Redmi 10: maximum supported volume - 512 GB, recommended speed class — UHS-I U3 or A2.

FAQ: Frequent questions about access to SD-map 10