Xiaomi Redmi Note 8 Pro: When will the next MIUI update be released and how to get it?

Xiaomi Redmi Note 8 Pro remains one of the most popular smartphones of the brand even 5 years after its release. However, owners of the device are increasingly faced with the question: when will the next update for this model? In 2026, the situation with support for the Redmi Note 8 Pro has become especially ambiguous – Xiaomi officially stopped the release of global firmware, but enthusiasts and regional branches of the company continue to please users with new versions of MIUI.

In this article, we’ll break down the current status of updates for the Redmi Note 8 Pro (codename begonia), analyze the firmware release schedule for 2026, tell you how to check for updates manually, and give you installation recommendations, and learn what alternative ways to update are available if official support is terminated.

Official Support Status for Redmi Note 8 Pro in 2026

Xiaomi Redmi Note 8 Pro was released in September 2019 based on the Mediatek Helio G90T processor and Android 9 Pie operating system. According to Xiaomi's policy, the low-end devices of the Redmi Note line receive 2 major Android updates and 3-4 years of MIUI support. This means that:

• 📅 The last major Android update to Android 11 (MIUI 12.5) in 2021.
• ⚠️ Official global support ends in 2023 (last stable version — MIUI 14.0.4.0).
• 🌍 Regional versions (India, Russia, EU) can get updates longer.
• 🔧 Unofficial firmware (for example, Xiaomi.eu or customized firmware) ROM) keep coming out.

It’s important to understand that even after official support is discontinued, the smartphone doesn’t go “dead”; Xiaomi sometimes releases critical security patches for older models, and the development community creates alternative firmware; however, from 2026, the likelihood of new global versions of MIUI for the Redmi Note 8 Pro is nearing zero.

Update schedule for Redmi Note 8 Pro (begonia) in 2026

As of this writing (June 2026), the latest official firmware for the Redmi Note 8 Pro is:

As you can see from the chart, global updates stopped at the end of 2023, but there are a few nuances:

• 🔄 Monthly security patches for the Redmi Note 8 Pro are no longer coming out, but sometimes Xiaomi releases critical fixes (for example, for vulnerabilities in the Android kernel).
• 🇮🇳 In India and some Asian countries, support could continue until the end of 2026 due to the high popularity of the model.
• 🛠️ Xiaomi.eu and other custom builds are updated weekly/monthly, but require unlocking the bootloader.

⚠️ Note: If your Redmi Note 8 Pro runs on Android 10 or older, upgrading to Android 11 could lead to performance issues due to optimization features MIUI For Mediatek Helio G90T. Before installing, check user reviews on forums (for example, 4PDA or XDA Developers).

How to Check for Updates Manually

Many users are unaware that MIUI updates can be checked not only through standard notification, but also manually.

1. Open Settings → About the phone → System update.
2. Click on the three dots in the top right corner and select Update Package (if available).
3. If there is an update, the system will prompt you to download it, and if not, it will say "No update."

If the automatic check doesn’t show updates, but you’re sure they should be, try:

Reset network settings (Settings) → SIM-maps and networks → Resetting network settings)

Connect to another Wi-Fi network (sometimes regional updates are blocked)

Use VPNs with servers in India or Europe

Download firmware manually from the site Xiaomi Firmware-->

Important: If your smartphone is unlocked (has Unlocked status in Settings → Additional → MIUI version), some updates may not be installed due to Xiaomi policy.In this case, it is recommended to use Xiaomi.eu or custom firmware.

💡

If you check for updates and see the error "Can't connect to the server", try changing the DNS to 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare) in the Wi-Fi settings.

How to install the update on Redmi Note 8 Pro: step-by-step instructions

If you find an update available, you can install it in two ways: through the system menu or manually through Recovery.

Method 1: Installation via OTA (over the air)

This is the easiest method, but it only works if:

• 📶 You have a stable Wi-Fi connection.
• 🔋 Battery charge over 50%.
• 📱 There is enough free space on the phone (at least 2 GB).

Instructions:

1. Go to Settings → About the phone → System update.
2. Click Download (if the update is available).
3. After download, click Set and wait for the reboot.
4. Do not interrupt the process! The first download after the update can take 5-10 minutes.

Method 2: Installation through Recovery (manual method)

If the OTA update doesn’t work or you downloaded the firmware manually (for example, with Xiaomi Firmware), follow the following steps:

For installation via Recovery:

1. Move the downloaded.zip file to the root of internal memory (not to folders!).
2. Go to Settings → About the phone → System update.
3. Click on three dots → Select the update file.
4. Select the downloaded file and confirm the installation.
5. After the reboot, the phone will be updated.

⚠️ Note: If you install firmware below the current version (downgrade), this may result in a bootloader lock or data loss.Before a downgrade, be sure to back up via Settings → Additionally. → Backup and reset.

Alternative ways to update: Xiaomi.eu and custom firmware

If the official updates are no longer coming out, but you want to get a fresh version of MIUI or Android, consider the unofficial firmware:

• 🌐 Xiaomi.eu – European build MIUI No adverts and weekly updates.
• 🤖 LineageOS or Pixel Experience - custom firmware based on pure Android (up to Android 12 for Redmi Note 8 Pro).
• ⚡ Project Elixir or ArrowOS – Optimized builds with improved performance.

To install custom firmware will require:

1. Unlock the bootloader through Mi Unlock Tool (requires a Xiaomi account binding).
2. Install TWRP Recovery (unofficial version for begonia)
3. Make a full backup of the current firmware.
4. Switch a.zip file through TWRP.

Advantages of custom firmware:

• ✅ Updates are coming out regularly (even for older devices).
• ✅ No Advertising and Unnecessary Xiaomi Apps.
• ✅ The ability to install new versions of Android (for example, Android 12 instead of Android 11).

Disadvantages:

• ❌ Loss of the official guarantee if it is still valid).
• ❌ Risk of "bricking" of the device with incorrect firmware.
• ❌ Some functions (such as Widevine) L1 for Netflix HD) may not work.

💡

Installing custom firmware requires experience. If you are a beginner, it is better to use official or Xiaomi.eu firmware, as they are more stable.

Frequent issues after updating and how to solve them

Even if the update is successful, Redmi Note 8 Pro users often face the following problems:

If the phone hangs on the MIUI logo after the update, try:

1. Press Power + Volume up to enter Recovery.
2. Select Wipe Data → Wipe All Data (this will delete all data!).
3. Reset the device.

⚠️ Note: If you upgraded from Android 10 to Android 11 and noticed a strong braking, it’s because Mediatek Helio G90T Not optimized for new versions MIUI. In this case, it is recommended to return the old firmware or install a custom (for example, Pixel Experience), which works faster.

Forecasts for the future: should we expect new updates?

With the Redmi Note 8 Pro coming out in 2019, the likelihood of new official updates is extremely low, but there are several scenarios:

• 🔄 Critical security patches could be released by the end of 2026, especially for India and China).
• 🛠️ Unofficial firmware (Xiaomi.eu, LineageOS) will be updated for another 2-3 years.
• 📱 Android port 13/14 It can be developed by independent developers, but without official support.

If you are interested in updates, consider the following options:

• 🆕 Upgrade your smartphone to a newer model (e.g. Redmi Note 12 Pro)+).
• 🔧 Install custom firmware with support for fresh versions of Android.
• 🛡️ Use alternative launchers (like Nova Launcher) to improve the firmware-free interface.

The Redmi Note 8 Pro will not receive any more official MIUI updates, but that doesn’t mean the device is useless. With custom firmware and proper optimization, it will last for several more years.

💡

If you need regular updates, it’s best to consider buying a new smartphone.The Redmi Note 8 Pro no longer meets modern safety and performance requirements.

FAQ: Frequent questions about Redmi Note updates 8 Pro