How much time is updated Xiaomi equipment: smartphones, TVs, routers

You launched an update on your Xiaomi, but the process took a long time — and now you don’t know if this is the norm or the device hung? Or vice versa: firmware installed in 5 minutes and you doubt whether the device missed critical files? The time of updating Xiaomi equipment depends on a dozen factors: model, type of update (air or manual), Internet speed and even the state of flash memory. In this article, we will analyze the real time frame for smartphones, TVs and routers of the brand — taking into account nuances that are not written in the official instructions.

If your Redmi Note 12 is updated for longer than 3 hours and your Mi TV Q2 is hanging on the download screen for more than 40 minutes, that’s not always a cause for panic, but it’s not the norm either. We collected data from hundreds of models (from the Xiaomi Mi A1 2017 to Xiaomi 14 Ultra 2026), analyzed user reviews and found patterns, such as why the update through Recovery takes 3 times longer than OTA, even with the same file size.

1. How much is updated Xiaomi smartphone: the norms for OTA and manual firmware

The standard over-the-air update (OTA) on Xiaomi smartphones takes 10 to 45 minutes, depending on the package size and model.

• 📱 Xiaomi 13T/14 Pro (MIUI 15 → 16, ~1.2 GB): 15–25 minute
• 📱 Redmi Note 11 Pro+ (MIUI 13 → 14, ~800MB): 12–20 minutes
• 📱 POCO X5 Pro (MIUI 14.0.3 → 14.0.4, ~300MB): 8-15 minutes

But these figures are only relevant for ideal conditions: stable Wi-Fi (speed from 50 Mbps), battery charge >50% and free disk space >3 GB. In practice, users face delays:

⚠️ Note: If the Xiaomi smartphone is updated longer 1.5 firmware-size <1 GB is a sign of failure. Don't pull the cable out and reboot the device:

1. Wait another 30 minutes (the progression strip should flash on the screen).
2. If the strip is not moving, hold the power button for 15-20 seconds for a forced reboot.
3. After the reboot, check the MIUI version in Settings → About Phone. If the update doesn't apply, repeat the process.

2. Why Xiaomi Update Lasts Hours: Top-5 cause

If your Xiaomi Mi 11 or Redmi 10C is updated for more than 2 hours, there are five factors that are problematic:

1. A damaged firmware file is most often downloaded via the mobile Internet with an unstable signal, the system tries to install a broken packet, but constantly stumbles on checksum errors.
2. Custom Recovery Conflict – If you’ve previously installed TWRP or other modifications, a standard update may get stuck with signature verification.
3. Overloaded Xiaomi servers – in the first 2-3 days after the release of the new MIUI, the download speed drops by 10 times. For example, when MIUI 15 was released, users complained about downloading firmware for 5-6 hours.
4. Hardware restrictions – on older models (Redmi 4X, Mi 5), the processor can not cope with unpacking large packages (> 1 GB), and the system “hangs” at the stage of Optimizing apps.
5. Antivirus blocking – some applications (such as Avast or 360 Security) perceive the MIUI update as suspicious activity and slow down the process.

🔍 How to diagnose a problem? Go to Settings → The phone. → Version. MIUI And tap 10 times on the logo. MIUI, To activate the developer mode. Then go to Settings. → Additionally. → For developers, turn on the Error Log. After the next update, check the logs for a specific error (e.g., logs, ERROR: Failed verification with a bit file).

Xiaomi TVs Update Time: From Mi TV 4A to Q2

Xiaomi TVs are updated longer than smartphones due to the features of the architecture of Android TV.

• 📺 Mi TV Q2 55" (Patchrom → MIUI TV 3.0): 25-40 minutes
• 📺 Redmi Smart TV X50 (Security update: 15–25 minutes
• 📺 Mi TV 4A 32” (old firmware → new): up to 1 hour

⚠️ Note: On Xiaomi TVs, you can’t interrupt the update – this leads to a blink (the device does not turn on, the red indicator flashes:

1. Check the indicator on the case: if it flashes white - update is coming, red - failure. 2. If the indicator is gone, wait another 30 minutes (sometimes the screen goes out, but the process continues). 3. If after 2 hours there is no change - disconnect the TV from the network for 5 minutes, then turn it on again. Do not press the buttons on the remote during the reboot!

💡 Useful Life Hack: To speed up your TV upgrade, connect it to your router with an Ethernet cable. In user experience, this reduces time by 30-40% compared to Wi-Fi.

Turn it off. USB-devices (flash drives, keyboards)

Connect to Uninterruptible Power Supply (UPS)

Close all applications (Netflix, YouTube)

Check the free space (>2 GB) in Settings → Memory

-->

Xiaomi Routers Update: Why 10 Minutes Longer Is the Norm

Xiaomi routers (Mi Router 4A, AX3600, Redmi Router AC2100) are updated on a different principle: the firmware is loaded in the background, and installation occurs when you restart.

• 📶 Mi Router 4A Gigabit: 5-8 minutes (including reboot)
• 📶 AX6000: 8-12 minutes (due to dual-band firmware)
• 📶 Redmi Router AC2100: 3-5 minutes (simplified firmware)

🔧 If the router does not turn on after updating (the orange indicator burns), do not panic - this is a normal process of reconfiguration of modules. Wait until the indicator turns blue (up to 15 minutes:

1. Shut down the power for 30 seconds.
2. Press the Reset button for 10 seconds (before the indicator flashes).
3. Connect to the router via cable and repeat the update via the web interface (192.168.31.1).

💡

Before upgrading your router, save the settings to: Settings → Additional → Backup/Restore. This will help you quickly restore the network if the firmware resets.

5 How to Speed Update Xiaomi: 7 Working Ways

If you are tired of waiting for hours, use these methods (checked on MIUI 12-16):

1. Use it. ADB-Installation commands: Adb sideload update.zip (file update.zip should be in the file with ADB).
2. Turn off signature verification (power users only!): fastboot oem disable-verity
3. Install firmware via Fastboot – it’s faster than through Recovery, but requires an unlocked bootloader.
4. Use a VPN (like Cloudflare’s Warp) – sometimes Xiaomi servers respond faster via foreign IPs.
5. Clear the Dalvik cache before upgrading: adb shell su -c "rm -r /data/dalvik-cache/*"
6. Connect to 5GHz Wi-Fi - at 2.4GHz, the download speed of the firmware drops 2-3 times.
7. Use a local server (such as Xiaomi Server Picker) to select the nearest data center.

⚠️ Note: Methods 1, 2 and 3 require an unlocked bootloader and may result in a loss of warranty.If you are not sure about your actions, use only methods 4-7.

💡

The fastest way to upgrade is through Fastboot, but it is only suitable for users with an unlocked bootloader. For most owners, the best option is with ADB-sideload (mode 1).

6.What to do if the Xiaomi update is hanging: step-by-step instructions

If your Xiaomi is frozen on the screen with the MI logo or progress bar, act according to the algorithm:

Wait 1 hour (the screen should have an animation of the download)

Check the indicators (on TVs - the color of the glow)

Reboot the device with a long press of the power button

If it doesn’t help, log in to Recovery and clear the cache.

In extreme cases, flash the device manually through Fastboot-->

📌 Critical errors and their solutions:

🔧 Emergency method: If the device doesn't respond to buttons, try hardware reset (for smartphones):

1. Turn off the phone.
2. Press Power + Volume up for 10 seconds.
3. From the Recovery menu, select Wipe data → Factory reset.
4. After reset, repeat the update.

⚠️ Warning: This method will delete all data from the device! SIM.

7. Frequent questions about Xiaomi updates