Why Xiaomi smartphone reboots for a long time - all the reasons and ways to accelerate

Xiaomi has become an integral part of everyday life, but sometimes even the most reliable technology fails. One of the most annoying problems is a long reboot, when the device hangs on the Mi logo, 5-10 minutes "thinks" before turning on or refuses to turn off at all. What is the reason for this behavior? Let's say right away: it's not always the manufacturer's fault. Most often the problem lies in the software, settings or even the physical wear of components.

In this article, we will discuss 7 The main reasons why Redmi Note 10 Pro, POCO X5, Mi 11 The Ultra or another Xiaomi model can slow down when you reboot, and you can also give step-by-step instructions for diagnosing and troubleshooting, from basic steps like cleaning the cache to deep firmware manipulation, you'll find a solution to your situation. And yes, we're not going to say, "just wait" or "take to service" without an explanation, but it's just a specific step, given the nature of the shell. MIUI and hardware platform Qualcomm/Mediatek.

Note: If your smartphone doesn’t turn on after a long restart (black screen, no button response), it’s another problem β€” most likely due to a bootloader damage or hardware failure "[em>Xiaomi does not turn on: what to do if the phone is dead)".

1. overloaded cache of system and applications

The most common reason for reboot freezes is cache, which is divided into three types in MIUI:

  • πŸ“± App cache – temporary program files (for example, Instagram or Telegram cache can weigh gigabytes).
  • πŸ–₯️ System cache - shell data MIUI, including graphical elements and settings.
  • πŸ”„ Dalvik cache – optimized files to speed up Java applications (relevant for older versions of Android).

When the cache is full, the system reboots it and spends time re-indexing it and cleaning it up, and in the worst cases, it leads to an "infinite" download animation.

How do you check? Go to Settings β†’ Memory β†’ Cleanup and see how much space the garbage takes up. If the number is above 1-2 GB, it's time to act.

Clear the cache of individual applications in Settings β†’ Apps

Use the built-in cleaning utility in MIUI

Delete Dalvik cache via Recovery Mode (for advanced)

Disable Automatic Optimization in Settings β†’ Battery β†’ Optimization

-->

⚠️ Warning: Don't confuse cache cleaning with factory resetting! The first procedure is safe and doesn't delete personal data, the second one erases everything, including photos and contacts.

2. Conflicts after MIUI update

MIUI firmware updates are supposed to improve the smartphone, but in practice, the opposite often happens.

  • πŸ”„ Incomplete update installation – if the process is interrupted (for example, due to battery discharge).
  • πŸ“¦ Incompatibility with modified files – if you have previously changed system fonts, animations, or removed embedded applications.
  • πŸ› οΈ Errors in the firmware itself - especially relevant for beta versions MIUI.

How do you know if the upgrade is a problem? If the smartphone started to reboot for a long time immediately after installing the new version of MIUI, this is a sure sign. For example, users of the Redmi Note 9 Pro have massively complained about hanging after upgrading to MIUI 14 due to a bug with display drivers.

Decisions:

  1. Reverse to the previous version via Fastboot (instruction below).
  2. Make a forced reinstallation of the current firmware on top of the existing one (without data loss).
  3. Clear the cache section in Recovery mode.
How to get back to the old version of MIUI?
1. Download the desired firmware from the official Xiaomi website (choose the version for your model!). 2. Rename the file to update.zip and place it in the root of the phone memory. 3. Go to Settings β†’ About Phone β†’ System Update β†’ Three Points β†’ Select the update file. 4. Confirm the installation and wait for the completion (don’t turn off the phone!).

3. damaged file system or memory

If Xiaomi’s smartphone not only reboots for a long time, but also slows down in normal mode, it could be the file system or physical problems with the drive, especially for devices with eMMC memory (such as the Redmi 8A or POCO M2), which degrades over time.

Signs of memory damage:

  • 🐒 Slowing down after writing a large file (e.g. video) 4K).
  • πŸ”„ Spontaneous reboots when connecting to a PC.
  • ❌ Errors like "Com.android.systemui process stopped".

Diagnosis:

  1. Connect your phone to your PC and check your memory health with CrystalDiskMark or H2testw (for Windows).
  2. Go to Settings β†’ Memory β†’ Internal Memory β†’ Three Dots β†’ Check (in some versions of MIUI).

If tests show errors, try:

  1. Format your phone via Recovery (reset to factory settings).
  2. Replace the memory module (requires disassembly of the device).

| Never | Once in six months | Only when there are problems |I don't know how to do it-->

4. Conflicts with user settings

Many Xiaomi owners like to customize their devices, changing themes, installing third-party launchers, disabling system applications, but some changes can break the download chain, which causes the phone to β€œthink” during the initialization stage of the system.

What most often causes problems:

  • 🎨 Sub-items from MIUI Theme Store – Some contain code errors that conflict with the kernel.
  • 🚫 Disabling system applications through ADB or Titanium Backup (for example, com.miui.weather2).
  • πŸ”§ Change developer settings, such as β€œDo not save actions” or β€œBackground processes".

How to get it back:

  1. Reset the theme settings: Settings β†’ Display β†’ Themes β†’ Standard.
  2. Enable back the disabled applications: adb shell pm enable com.miui.weather2
  3. Reset the developer settings: Settings β†’ About Phone β†’ MIUI version (5 times tap) β†’ Disable.

πŸ’‘

Always check other users' reviews before installing a custom theme. If there are complaints about "infinite download" in the comments, you better refrain.

5. Hardware problems: battery and power controller

If the software methods didn't work, you should think about the hardware malfunctions, and most often the faults are:

  • πŸ”‹ Worn-out battery – if its capacity falls below 60%, the power controller may not properly manage the voltage when restarting.
  • πŸ”Œ Damaged charging connector – oxidation or mechanical damage causes short circuits.
  • πŸ”₯ CPU overheating – if the smartphone is heated above 60Β°C, the system is forced to slow down the loading.

How to diagnose:

  1. Check the battery status via AccuBattery (Android) or the command: adb shell dumpsys battery Look for health option - if it's not 2 (Good), the battery needs to be replaced.
  2. Check the processor temperature in AIDA64 or CPU Monitor.

Decisions:

Problem.SymptomsDecision
Worn-out batteryThe phone turns off at 20-30%, charges for a long timeBattery replacement (cost: 1,500–3,000) β‚½)
Oxidation of the connectorCharging is interrupted, the phone spontaneously reboots.Cleaning with alcohol or replacing the connector
Processor overheatingPhone is hot, slows down in games, turns offThermopaste replacement (for Snapdragon 8 Gen 1/2)

⚠️ Warning: If the battery is replaced, the plume or power controller is likely to be damaged, and a diagnosis at the service center is required.

6. Viruses and malware

Yes, Android viruses are not a myth, and some are specifically designed to block normal system loads by showing ads or demanding ransoms.

  • πŸ”“ Unlocked loader (bootloader).
  • πŸ“± Established APK unverified.
  • πŸ”„Root-rights.

Signs of infection:

  • Appearance of unfamiliar apps on the menu.
  • Advertising in notifications or over the interface.
  • Spontaneous installation of programs.

How to treat:

  1. Install Malwarebytes or Dr.Web Light and scan the system.
  2. Remove suspicious apps in Safe Mode (press the power button β†’ β€œSafe Mode”).
  3. If the virus blocks access to settings, reset via Recovery.

πŸ’‘

Never install. APK-files from sites like apkpure.com or apkmirror.com without checking the hash amount.

Failures in the communication module (modem)

Few people know, but problems with the modem (which is responsible for cellular communication and Wi-Fi) can also cause a long reboot, which is because the MIUI initializes all the radio modules when it starts, and if one of them does not respond, the system β€œhangs” in wait.

Typical reasons:

  • πŸ“Ά Wrong settings APN (especially after the change of operator).
  • πŸ”„ Failure to work IMEI (post-stop).
  • πŸ“‘ Damage to the antenna module (for example, after falling).

How to check:

  1. Go to Settings. β†’ SIM-maps and mobile networks β†’ Access points (APN) Compare the settings with the official ones from your operator.
  2. Check the IMEI by dialing *#06#. If Null or Invalid is displayed instead of the number, you need to restore.

Decisions:

  • πŸ”§ Restore. IMEI Engineering Mode (this is required) MTK-processor QCN-file (for Snapdragon).
  • πŸ“± Reset network settings: Settings β†’ System system β†’ Resetting settings β†’ Resetting network settings.

FAQ: Frequent questions about Xiaomi's long reboot

My Xiaomi hangs on the MI logo when it's turned on.
If the phone does not pass the boot stage (the Mi logo burns for more than 10 minutes), try: Press the Power button + Volume up for 10-15 seconds for forced reboot. If it doesn't work, go to Recovery. + Volume up and select Wipe Cache Partition. In extreme cases, reset to factory settings (Wipe Data). ⚠️ Warning: If the phone doesn’t turn on after reset, it may indicate damage to the boot partition – you’ll need to flash it through Fastboot.
After the MIUI update, the phone was shut down for a long time. How do I fix it?
This is a typical problem after a dirty upgrade (installed on top of the old version).Solutions: Clear the cache in Recovery (Wipe Cache). MIUI (If it doesn't work, make a full reset and install the update again. πŸ’‘ Tip: Always back up before updating via Settings β†’ System system β†’ Backup.
Can Xiaomi Reboot Be Speeded Up Without Resetting?
Yes, try these methods: Turn off autoloading unnecessary apps in Settings β†’ Apps β†’ Autorun. Remove unused apps and clear the cache (section 1). Turn off the interface animation in the developer settings (Window Animation Scale β†’ No Animation). Check the phone for viruses (section 6). If nothing helps, it's likely a hardware problem (section 5).
Why does the Redmi Note 11 Pro take a long time to reboot after replacing the battery?
This is normal behavior in the first 2-3 charge/discharge cycles. The new battery is calibrated and the system adapts to its characteristics. If the freezes continue longer: Check if the battery plume is properly connected. Reset Battery Stats via ADB: adb shell dumpsys battery reset Make sure the battery is original (poor analogues can cause failures of the power controller).
How to reflash Xiaomi if it does not turn on?
If the phone doesn’t respond at all or gets stuck on the logo, you’ll need firmware via Fastboot: Download the Mi Flash Tool and firmware for your model from Xiaomi’s website. Connect your phone to your PC in Fastboot mode. + Volume down. In Mi Flash, select a firmware file and press Flash. ⚠️ Warning: Incorrect firmware can permanently block your device (brick!