Why Xiaomi Redmi Note 8 is not updated: all the reasons and ways to solve it

Xiaomi Redmi Note 8 has not received an update for a long time MIUI, Is there a message in the System Update section that says, “No updates available,” or does the download process stop by 0%? This problem is familiar to many owners of the budget hit of 2019. Despite the fact that the model was officially supported until November 2022, users still face difficulties when trying to update the firmware.

In this article, we’ll break down all the possible reasons why your Redmi Note 8 (codenamed ginkgo) isn’t updated, from trivial connection errors to hidden Xiaomi restrictions. MIUI And for those of you who are afraid of bricking, we've put together a security checklist and step-by-step instructions with illustrations.

Important: If your phone is released for the Chinese market (suffix version _CN In the firmware name, the update algorithm may be very different from the global version.

Official Support Status: Is the Redmi Note 8 Updated in 2026?

First, let’s get to the bottom line: Should your Redmi Note 8 get any updates at all?

• 📅 Release date: Sept. 2019 year (model) M1908C3JG/M1908C3JH).
• 🔄 Term of support MIUI: 3 years of major updates (up to) MIUI 13) + 1 year of security patches (until November 2022).
• 🚫 Last version: MIUI 13.0.8 (Android 11) for global firmware. MIUI 14 based on Android 12, but with limitations.

This means that Xiaomi has officially stopped releasing updates to the Redmi Note 8 (except for critical security patches) since late 2022.However, many users continue to receive notifications about new versions - why is this happening?

If your phone is released for the Chinese market, it can theoretically receive updates longer, but with a number of restrictions (for example, without Google services). → The phone. → Version. MIUI and look at the suffix in the build number (for example, V13.0.8.0.SCOCNXM — Chinese).

⚠️ Note: Installing firmware not for your region (e.g. Chinese on a global phone) may cause you to lose your firmware IMEI, There's a problem with the mobile network and sensor failures, and you don't have to do that unless you absolutely have to.

2. Top.-7 Reasons Why Redmi Note 8 not updated

If your phone needs to receive updates (like you have an active-supported Chinese version) but they don’t come, check the following reasons:

🔌 Problems with connecting to Xiaomi servers

• 🌐 Unstable Internet: Updates weigh 1.5-3 GB. With a weak signal Wi-Fi or mobile Internet download can stop.
• 🔒 Lockdown DNS: Some providers (especially in Russia and China) block access to Xiaomi update servers.
• 🛡️ VPN/Proxy: If you use VPN, Xiaomi servers may perceive your phone as a device from another region and not offer up-to-date updates.

📱 Software failures and system errors

• 🗑️ Damaged cache: Update files are stored in a folder /cache. If they are damaged, the system will not be able to recognize them.
• 🔄 Update service failure: The com.android.updater process may be stopped or not work properly.
• 📁 Space shortage: Update installation requires a minimum of 4-5 GB of free space in internal memory.

⚙️ Manual intervention in the system

• 🔓 Unlocked bootloader: Phones with unlocked bootloader may not receive OTA-policy updates by Xiaomi.
• 🛠️ Castomic Recovery: Installation TWRP Recovery or other recovery disables the standard update mechanism.
• 📦 Modified firmware: If you have ever installed custom ROM (LineageOS or Pixel Experience), OTA-The updates will not work.

📡 Regional restrictions

Xiaomi often suspends updates for specific regions because of:

• 📜 Legal issues: In India, for example, updates to some models were suspended due to legal action.
• 🔒 In Russia since 2022, part of Xiaomi services is working with interruptions.
• 📦 Local bugs: If a critical bug is detected in the firmware for a specific region, updates may be delayed.

⏳ End of support

As mentioned above, the Redmi Note 8 no longer receives official updates, but some users report "ghost" update notifications.

• 🔄 Server error: Xiaomi sometimes sends push notifications by mistake.
• 📡 Local cache: Old update files can be displayed on the menu, although they are no longer on the servers.
• 🤖 Viral Software: Some malware mimics update notifications.

🔋 Hardware problems

In rare cases, the fault of the "iron":

• 💾 Damaged flash memory: If the eMMC module starts to “drop”, the phone can not write new data.
• 🔋 Weak battery: At a charge level below 30%, the system blocks the installation of updates.
• 🔌 Port problems USB: If you upgrade via cable, an unstable connection may interrupt the process.

🛑 Manual disabling of updates

Check if you have accidentally disabled automatic update checks:

1. Go to Settings → About the phone → System update.
2. Click on the three dots in the top right corner and select Settings.
3. Make sure the options are enabled: “Automatic download over Wi-Fi” “Notify you of new updates”

💡

If you have a Redmi Note 8 Released for the global market (EEA/Global), post-November 2022 Any update notifications are either an error or a result of manual interference with the system.

3 How to Force Upgrade Redmi Note 8: 3 Working Methods

If the standard method through settings → Updating the system doesn't work, try alternative methods, beware: all actions you perform at your own risk, improper manipulation can lead to data loss or "bricking" the phone.

🔄 Method 1: Manual installation via Recovery

This method is suitable if:

• The phone is turned on and working stably.
• You have access to Recovery Mode.
• You have not changed the standard recovery to TWRP.

Step-by-step:

1. Download the correct firmware: Go to the official website MIUI Downloads. Select the Redmi Note 8 (ginkgo) model. Download the stable version for your region (e.g. Global or Global). EEA). The file must have a.zip extension and weigh ~2-3 GB.
2. Transfer the file to your phone: Connect the phone to your PC and copy the downloaded.zip to the root of internal memory (not to folders!). update.zip convenienceally.
3. Start Recovery Mode: Turn off the phone. Click the power. + Volume up 10-15 seconds until the Mi logo appears. Release buttons - you will be taken to Recovery Mode.
4. Install the update: Select the language (if required). Go to Install update.zip Confirm installation and wait until completion (5–10 minute).

Reboot:

Reboot to System

Downloaded the official firmware from the Xiaomi website|Check the compliance of the region (Global/EEA/CN)|Copyed the file. update.zip root-memory|Charging the phone at least to 50%|Backed up important data-->

⚠️ Warning: If the phone has been stuck on the Mi logo for longer than 15 minutes after installation, don't turn it off. Wait at least 30 minutes - sometimes the first download after the update takes a long time. If the screen is out and does not respond, try pinching the Power for 20 seconds to force a reboot.

🖥️ Method 2: Update via Fastboot (for experienced users)

This method is suitable if:

• The phone is not turned on or stuck on the logo.
• You are ready to use the PC and the Mi Flash Tool.
• You have bootloader unlocked (if not, you will have to unlock).

What you need:

• 💻 Windows computer (7/10/11).
• 🔌 Cable USB (preferably original).
• 📦 Firmware in.tgz format (downloaded from the official website).
• 🛠️ The Mi Flash Tool.
• 🔓 Unlocked bootloader (if not unlocked, follow Xiaomi instructions).

Instructions:

1. Install drivers: Download and install Qualcomm drivers. Connect your phone in Fastboot mode (click Power). + Loudness down. Check that the Qualcomm device has appeared in Device Manager. HS-USB QDLoader 9008.
2. Unpack the firmware: Download the.tgz archive to a folder without Cyrillic characters (for example, C:\MIUI\ginkgo_global).
3. Launch Mi Flash Tool: Open the utility on behalf of the administrator. Press Select and point the path to the unpacked firmware. Connect the phone in Fastboot mode. Press Refresh - should appear COM-Select the firmware method: Clean all – cleans all data! + Save user data is an attempt to save data (not always working). Press Flash and wait for completion (5-15 minutes).

🌍 Method 3: Change the firmware region (for advanced applications)

If your phone is released in one region (for example, CN), But if you want to get updates for someone else (like Global), you can try to change the region:

• Poose. IMEI (and, as a result, the lack of a mobile network).
• Non-functioning sensors (gyroscope, compass).
• Camera errors.

How to do this:

1. Download the firmware for the desired region (for example, ginkgo_global).
2. Install it via Fastboot (as in Method 2).
3. After the firmware, reset to factory settings (Settings) → Additionally. → Recovery and discharge).
4. Check all functions (calls, SMS, camera, sensors).

💡

Before changing the firmware region, check the compatibility of models! for example, Redmi Note 8 for India (IN) The Global Version (Global) has different modules. LTE. After the firmware, you may lose support for some frequencies. 4G.

4. Frequent update errors and how to fix them

When trying to update the Redmi Note 8, users encounter common errors, and let's look at the most common ones and how to solve them.

🚫 Error: “Failure to download the update»

Possible causes and solutions:

⏳ Error: “Update has got stuck by 0%»

If the download or installation process is stalled, try:

1. Reboot your phone and try again.
2. Clear the update cache: Settings → Annexes → Application management → Three points. → Show system-based → Updating the system → Warehouse → Clear the cache
3. Try downloading the update via another type of connection (e.g., from mobile internet instead of Wi-Fi).
4. If you are stuck in the installation phase (after reboot), wait 20 to 30 minutes. If nothing changes, force the phone to restart (Power) + Loudness down for 10 seconds).

🔋 Mistake: “Inadequate battery charge»

The system blocks the installation of updates if the charge level is below 30%.

• 🔌 Connect your phone to charge and wait at least 40-50%.
• 🔋 If the battery is worn out and discharges quickly, try upgrading via Recovery with a connected cable.
• ⚡ Use the original power supply (minimum) 10W).

🔒 Error: This update is not intended for your device»

This means that you're trying to install firmware not for your region or model.

• Does the code name of the firmware match (ginkgo for Redmi Note 8)?
• Is the region similar (e.g. Global vs. CN).
• Are you trying to install firmware from another model (for example, from the Redmi Note 8 Pro or Redmi Note) 8T).

💡

If you update with Recovery with E:footer is wrong, it means that the firmware file is corrupted or not intended for your model. Download it again and check the checksum (MD5).

5. How to check which firmware is on the Redmi Note 8

Before you look for updates, make sure you know the current version. MIUI And Android, which will help you avoid making firmware mistakes.

Method 1: Through phone settings

1. Open the Settings.
2. Go to About the Phone.
3. Scroll down to the version section MIUI.
4. Remember or write down: Version MIUI: for example, MIUI Global 13.0.8 Android version: for example 11 RKQ1.200826.002. Assembly number: for example, QKQ1.191014.001.

Method 2: Recovery Mode

1. Turn off the phone.
2. Press Power + Volume Up to Enter Recovery.
3. The menu will include a version MIUI Android.

Method 3: Through ADB (for Advanced)

1. Connect the phone to the PC with debugging enabled USB (Settings → The phone. → Version. MIUI → 7 times press on "Version" MIUI» → Return to “Settings” → Additionally. → For developers → Debugging by USB).
2. Open the command line on your PC and type in: adb shell getprop ro.miui.ui.version.name adb shell getprop ro.build.version.release
3. The first team will show the MIUI version, the second will show the Android version.

Transcript of the MIUI version:

Version format: V13.0.8.0.SCOMIXM, where:

• V13 — version MIUI (13).
• 0.8.0 is the assembly number.
• SCO — code (SCO = Redmi Note 8).
• MI — region (MI = Global).
• XM — build-up (XM = stable).

💡

If the assembly number has the letter C (for example, V13.0.8.0.SCOCNXM), It's Chinese firmware. MI — global, EU — European, IN — Indian.

6.Alternative ways to get new features on the Redmi Note 8

If the official updates are no longer coming out, but you want to get new features, consider alternatives.Caution: all methods except the first require unlocking the bootloader and can void the warranty.

🔄 Method 1: Update through MIUI bootloader

Official annex MIUI bootloader (available on Google Play) allows you to manually download and install firmware, even if you OTA doesn't work.

Instructions:

1. Install the application and open it.
2. Select the Redmi Note 8 (ginkgo) model.
3. Download the latest stable version for your region.
4. After downloading the application will offer to install the update - confirm.

📱 Method 2: Installation of custom firmware (Custom) ROM)

If you are not satisfied with the official MIUI, You can also install an alternative firmware, for example:

• 🤖 LineageOS – pure Android without unnecessary applications Xiaomi.
• 📱 Pixel Experience – firmware with Google Pixel features.
• ⚡ Havoc-OS - customizable firmware with many settings.
• 🔄 MIUI EU — European MIUI without Chinese services.

How to determine:

1. Unlock the bootloader through the Mi Unlock Tool.
2. Install. TWRP Recovery for Redmi Note 8.
3. Download the firmware from the official website (for example, LineageOS for ginkgo).
4. Reboot to TWRP And do the Wipe. → Format Data (this will delete everything)