Updating Xiaomi to HyperOS: Instruction, Compatibility and Problem Solutions

Xiaomi has officially unveiled a new operating system HyperOS – a revolutionary update designed to replace the new operating system MIUI This is the biggest transition in 10 years, with Android 14 based on the system, but with a completely redesigned core, interface and architecture. Users note increased performance, improved multitasking and new artificial intelligence features.

However, the HyperOS update has raised a lot of questions about what models are supported, how to install firmware correctly, what errors can occur and how to fix them. In this guide, we will analyze all the official and informal ways to update, including step-by-step instructions for different devices, analyzing new features of the system and solving typical problems.

What Xiaomi devices will get HyperOS: full list

The first new firmware received the flagship models Xiaomi 13/14 series, Redmi K60 and POCO F5. HyperOS is planned to be extended to devices released with 2020 The official list of supported models is divided into three waves:

• 📱 First Wave (Available): Xiaomi 14/13 Pro/Ultra, Mix Fold 3, Redmi K60 Ultra, POCO F6 Pro
• 🕒 Second wave (2026 Q2-Q3): Xiaomi 12/12T, Redmi Note 12 Pro+, POCO X5 Pro
• ⏳ Third wave (2026 Q4 - 2026): Redmi Note 11/10, POCO M6 Pro, Xiaomi Pad 6

It is important to check the relevance of the list on the official Xiaomi website, as dates can shift. for example, for the Redmi Note 11 Pro+ 5G The update was originally scheduled for April 2026, but was postponed to June due to camera bugs.

⚠️ Note: Devices older than 2019 (Redmi Note 8, Mi 9) will not officially receive HyperOS. Only unofficial ports from the community are available for them, but they may contain critical bugs.

How to upgrade to HyperOS: from the official OTA hand-stitched

There are three main methods of installing HyperOS: OTA-Update, using the Mi Flash Tool and through custom recovery (e.g, TWRP). Each option has its pros and cons. Let's look at them in detail.

1. Official OTA-Update (recommended method)

The safest method, but it takes patience.

Check the free space (minimum 5 GB)

Connect to a stable Wi-Fi

Charge the battery to 60%+

Make a backup copy in Settings → The phone. → Backup

-->

Next, go to Settings. → The phone. → Update the system. If the update is available, click Download and wait until it's done. 15-40 Do not interrupt the installation - this can lead to a "brick" of the device.

2 Manual update via Mi Flash Tool

It is suitable for experienced users if OTA-download is not available:

• 🖥️ Windows computer 10/11
• 🔌 Cable USB (preferably original)
• 📁 HyperOS for your model (download from Xiaomi Firmware Updater)
• 🛠️ Mi Flash Tool (last version)

Instructions:

1. Unpack the firmware in a folder without Cyrillic symbols.
2. Turn off the phone and turn to Fastboot mode (clip Volume Down + Power).
3. Connect the device to your PC and start the Mi Flash Tool.
4. Select the firmware folder and click Refresh → Flash.

⚠️ Note: Firmware via the Mi Flash Tool with the clean all option completely erases data, including internal memory (/data and /internal_storage). If you choose clean all and lock, the device is locked for custom firmware!

3. Installation via TWRP (for custom firmware)

This method is suitable for enthusiasts who want to install unofficial builds of HyperOS.

• 🔓 Unlocked bootloader (bootloader)
• 📱 Established TWRP Recovery for your model
• 📁 Firmware in.zip format (for example, from Xiaomi.eu)

Procedure:

1.Reboot to TWRP (Put Volume Up + Power)


2. Select Wipe → Advanced Wipe → Tag Dalvik, Cache, Data, System




3. Press Install → Select firmware file → Swipe to Confirm Flash




4. After installation, run Wipe Cache/Dalvik




5.Reboot (the first launch can take up to 15 minutes)

💡

If you install the HyperOS, TWRP The device is fixated on the logo, try to flash the core (boot.img) separately via fastboot:

fastboot flash boot boot.img

New HyperOS Features: What Has Changed Compared to the New HyperOS Features MIUI

HyperOS is not just a rebranding MIUI, It's a fundamentally new system with a redesigned architecture:

1. Performance and optimization

• ⚡ Xiaomi Velocity Engine: Dynamic resource allocation technology that reduces lags on the Internet 20-30% (by the AnTuTu test).
• 🧠 AI Boost: Artificial intelligence optimizes background processes, extending battery life 12-15%.
• 🔄 Deep defragmentation: Automatic cache cleanup and memory redistribution every 72 hours.

Interface and design

Visually, HyperOS has become more minimalist, with a focus on transparency and animation.

• 🎨 Adaptive Wallpaper: Interface colors are customized to wallpaper (like in Google’s Material You).
• 📱 New gestures: Additional navigation options including swipe down for return".
• 🔍 Smart Search: Global Search Now Searches Not Just in Apps, But in Posts WhatsApp/Telegram.

3. Security and confidentiality

HyperOS has strengthened protection measures:

• 🔒 SandBox for Apps: Isolating Suspicious Programs in a Virtual Environment.
• 🛡️ Protection against keyloggers: Blocking the recording of clicks in banking applications.
• 📡 Permission control: Apps now require separate permission to access the clipboard.

💡

HyperOS uses the Xiaomi Longan kernel, which is 40% lighter than standard Android.This allows devices with 4 GB of RAM to run smoother than on standard Android. MIUI 14.

Typical problems after updating and their solution

Despite the testing, many users experience bugs after switching to HyperOS, and here are the most common bugs and ways to fix them:

1. Fast battery discharge

Most often caused by background activity of Google Play Services or optimization AI. Decisions:

• 🔋 Turn off the Adaptive Battery in Settings → Battery → Battery mode.
• 🛑 Limit background activity for unnecessary applications (Settings) → Annexes → Permits → Auto-start).
• 🔄 Perform a cache reset (Settings) → Memory. → Clear the cache).

2. Problems with connection to Wi-Fi/5G

In some regions (including Russia) there are network failures due to incompatibility of the Qualcomm module:

• 📶 Switch to mode Only. LTE In Settings → SIM-maps and mobile networks → Type of network.
• 🔄 Reset network settings (Settings) → Connections → Resetting Wi-Fi and Bluetooth settings).
• 📡 If you have a Wi-Fi problem, change the network region to Europe in Settings → Additionally. → Region.

3 Camera errors (green screen, artifacts)

Camera bugs are most often seen on Redmi Note 12 devices and POCO X5:

• 📸 Install the camera’s handheld firmware from the GCam repository.
• 🔄 Turn it off. AI-Improvement in camera settings.
• 🛠️ Reset the camera settings to factory (Camera Settings) → Restore the default settings).

⚠️ Warning: If you've lost photos in the gallery after the update, don't panic! They may be hidden because of a change in folder structure. /storage/emulated/0/Pictures/.thumbnails Or use the File Manager.+ root-right.

HyperOS for Russian users: nuances and circumvention of restrictions

In Russia, HyperOS updates are delayed due to sanctions restrictions, and some features (e.g., Xiaomi Cloud and other features) are also available. AI Assistant may not be available. Here's what you need to know:

1. How to get an update before the official release

There are two legal ways:

• 🌍 Change of region: In Settings → The phone. → Additionally. → Select India or Indonesia, where updates are faster.
• 📲 Participation in beta testing: Register for Mi Pilot (requires a Mi Account without reference to the Russian Federation).

2. bypassing the blocking of Google Services (for devices without a GMS)

Some models (e.g. Redmi for the Chinese market) lack Google services.

• 📥 Install Google Installer from Xiaomi.eu (download from the forum).
• 🔧 Use MicroG as an Alternative GMS (root-rights).
• ⚠️ Avoid the left" APK Google Play – They may contain malicious code.

3. Payment and banking applications problems

Due to changes in HyperOS security policy, some banking applications (such as SberBank Online) may not work.

• 🏦 Install the app via the bank’s official website (not from Google Play).
• 🔐 Enable Protected Mode in Security Settings.
• 📱 If nothing helps, then you can go back to MIUI 14 (instructions in the following section).

💡

For stable operation of banking applications on HyperOS, disable MIUI Optimization in the Developer Settings (Settings) → The phone. → Version. MIUI → 7 times to tap → For developers → MIUI Optimization).

How to roll back from HyperOS to MIUI

If the new system is unstable or you don’t like the changes, you can return the system to the new system. MIUI. However, this process has risks:

• ⚠️ Loss of all data, including internal memory).
• ⚠️ Possible locking of the loader with incorrect downgrade.
• ⚠️ Loss of warranty (if the device is under warranty).

Instructions for rollback:

1. Download the latest stable firmware MIUI For your model from the official website.
2. Unpack the.tgz file and find the firmware folder inside.
3. Connect your device in Fastboot mode and run through the Mi Flash Tool with the clean all option.
4. After rebooting, reset to factory settings (Settings) → Additionally. → Resetting settings).

⚠️ Note: When you roll back from HyperOS to MIUI Anti-rollback protection can work, in which case the device will lock with the Anti 4 error. The only solution is to flash a newer version of HyperOS.

HyperOS’ future: What to expect in the next updates

According to insiders, the 2026-2026 HyperOS will receive several major updates in the years:

• 🤖 HyperOS 2.0 (2026 Q1): Full integration with Xiaomi SU7 (Electric vehicle – the phone will be able to control the functions of the machine.
• 🎮 Game mode Pro: Support for cloud gaming with resolution 4K@120fps.
• 🔒 Local. AI: Processing voice commands and photos without sending data to servers.
• 🌐 Support RISC-V: Experimental support for processors with architecture RISC-V (for future devices).

It is also expected to expand the list of supported devices, including budget models Redmi. A2+ and POCO M6. However, for devices older than 2018 (Redmi Note 7, Mi 8) updates to HyperOS are unlikely.

💡

Xiaomi plans to make HyperOS a cross-platform system that will work not only on smartphones, but also on smartwatches, TVs and even refrigerators of the brand.

FAQ: Frequent questions about HyperOS