Xiaomi, Redmi and Poco smartphone owners often face the limitations of a standard system that custom recavator installs. Moving from classic TWRP to more functional Orange Fox Recovery Project (OFRP) provides enhanced backup, mod installation and fine-tuning capabilities. This process requires care, but the result is worth it: you get a stable tool with a modern interface and support for new versions of Android.
The procedure for replacing one receptacle with another is not difficult if you already have Bootloader unlocked. However, even experienced users should be careful, since working with memory partitions always carries risks. In this article, we will discuss in detail how to safely switch to Orange Fox using an already installed TWRP or Fastboot mode.
Before you start, make sure your device is fully charged and all the important data is copied to an external medium. Wrong actions can lead to loss of information, so preparation is 90% of the success. We will look at all the nuances, including working with data encryption and the specifics of the ext4 and f2fs file systems.
Preparation of the device and necessary files
The first step is to assemble all the necessary components for a successful firmware. You need an up-to-date version of the Orange Fox installer, specially assembled for your CPU and smartphone model. There are no universal files: trying to flash an image designed for Snapdragon onto a device with MediaTek is guaranteed to turn the phone into a brick.
Also make sure that your computer has ADB and Fastboot drivers installed. Without them, communication between your PC and your smartphone is impossible. If you plan to use the upgrade method through your existing TWRP, the firmware file must have the.zip extension. For direct installation through your computer, you need a file with the.img extension.
☑️ Ready to flash
Pay special attention to Android versions. Recovery files for Android 11, 12, 13 and 14 may differ in partition structure. Using an OFRP version that does not match the current version of Android on the device may make it impossible to boot the system (Bootloop).
TWRP and Orange Fox Recovery Comparison
Many users are wondering why change the usual TWRP when it has been running for years? The answer lies in the speed of updates and functionality. Orange Fox often gets support for new versions of Android earlier than the official TWRP. This is critical for owners of new Xiaomi models who want root rights or custom firmware immediately after the release of the device.
The OFRP interface is more flexible to set up, you can change themes, configure swipes to perform actions, and get more detailed information about battery status and CPU temperature. In addition, built-in support for Magisk and the ability to install patches automatically make this tool the preferred tool for modding.
Below is a table showing the key differences between the two projects:
| Characteristics | TWRP (Official) | Orange Fox (OFRP) |
|---|---|---|
| Frequency of updates | Low/Mediocre | Tall. |
| Support for new Android | Delayed. | Ahead of the curve. |
| Interface configuration | Minimum | Extended (topics, swipes) |
| Built-in functions | Basic | Extended (ADB, Magisk, MIUI ROM) |
Method 1: Installation with existing TWRP
If you already have a TWRP on your smartphone, the Orange Fox installation process is as simple as possible: you don't need a computer, just download the installer's zip archive directly to the device, which is considered the most secure method, since it does not require partitioning through the command line.
Boot into Recovery mode by holding the Up + Power button combination. After the MI logo appears, release the power button, but keep the volume. From the TWRP menu, go to Install and select the downloaded Orange Fox zip file.
What to do if TWRP asks for a password?
Before installing, it is recommended to back up the current Recovery partition. To do this, select only the Recovery partition in the Backup menu and save it to the Recovery partition. SD-It's a card or a memory card that allows you to roll back if you fail, after you've selected a zip file. OFRP Swipe to confirm Flash with your finger.
Once the firmware is complete, TWRP will suggest installing Orange Fox permanently. If you want to replace the current backups permanently, if you leave the temporary installation, then the first time you reboot the system, Xiaomi stock recaps or the old TWRP can overwrite the new file.
Method 2: Direct firmware via Fastboot
The method of installation via Fastboot is universal and suitable even in cases where the current Recovery is damaged or not loaded, USB-image-file recovery.img. Connect the off smartphone to the PC by pressing the Volume Down button until a hare appears in the eardress cap.
Open the command line or terminal in the folder with ADB/Fastboot tools. Enter the command to check the connection:
fastboot devicesIf you get the serial number of the device, it means that the connection is correct. Now you need to flash the image.
fastboot flash recovery_ab recovery.imgNote the suffix ab. Modern Xiaomi smartphones use an A/B partition scheme, so it's important to flash the image into both slots unless the team does so automatically. In some cases, it may be necessary to firmware each slot separately:
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery.img💡
Once you have firmware through Fastboot, don't let the phone boot into the system right away.Put Volume Up + Power to get straight to the Orange Fox Recovery installed.
Once you've successfully recorded an image, type in the command fastboot reboot and immediately press the button combination to enter the Recovery. If you see the Orange Fox logo, the operation was successful, which completely replaces the previous recovery section.
Setup and first launch of Orange Fox
When first launched, Orange Fox can offer to select a language and adjust basic settings._interface_ This allows you to manage swipes, for example, a swipe to the left can start a reboot, and a swipe to the right can turn on a file manager.
An important step is to work with encryption. If after installing OFRP you can not open internal memory (the Data partition is displayed as empty or inaccessible), you need to format. Go to the Manage Partitions menu, select Data and click Wipe or Format Data.
⚠️ Note: Data partition formatting completely removes all files, photos and apps from the phone's internal memory.
After formatting, reboot the receptacles. In the Reboot menu, select Recovery. Once re-entered, the Data section should be available for write and read. Now you can copy files, install Magisk for root rights, or flash custom ROMs.
Common mistakes and ways to solve them
One of the most common problems is Bootloop (cyclic reboot) after installation. This often happens if the OFRP version does not match the Android version. For example, trying to install the Android 13 receptacles on Android 14.
Another common error is "Error 7" or "Signature verification failed" when running through TWRP. This means that the file is corrupted or not intended for your model. Always check the file checksums and device names (codename). For example, for Poco F3, the code is alioth, and for Redmi Note 10 Pro, it is sweet.
⚠️ If after firmware the phone stopped responding to buttons and only the charging indicator burns, it is possible that the device went into mode EDL (Emergency Download: The exit will require a dedicated cable or disassembly of the case to close the contacts.
Users may also face a problem when Orange Fox is not able to see the video. SIM-This is usually done by flashing the modem or completely cleaning the Cache and Dalvik partitions before installing the new system.
💡
Compatibility with Android and Recovery versions is critical to stability. Don't ignore the builder's requirements.