How to install MIUI 13 on Xiaomi Redmi 10: official and custom ways

Why upgrade Redmi 10 to MIUI 13?

Updating the firmware on Xiaomi Redmi 10 to MIUI 13 is not just a change in the number settings, but a real step towards improving the performance, security and functionality of the device. Even if your smartphone does not officially support this version, there are legal ways to install it. But before you start, you should figure out what exactly the new firmware gives and what pitfalls may occur along the way.

MIUI 13 brought with it optimized power consumption, faster interface animation and improved memory management. For Redmi 10 (model 21061119DG or 21061119DI), this means smoother gaming experience, faster gesture response and extended battery life. However, not all versions of MIUI 13 are equally useful: for example, global stable build may lose some features compared to Chinese, and custom firmware (like Xiaomi.eu) will add advanced settings, but require unlocking the bootloader.

In this article, we will look at all the current installation methods. MIUI 13 on Redmi 10 in 2026, including official OTA-Update (if available for your region), manual firmware via Fastboot and alternative methods for advanced users, with special attention to device preparation, data backup and solving common bugs such as Error: Critical Partition or hanging on the Mi logo.

Device requirements before installation of MIUI 13

Before you upgrade, make sure your Redmi 10 meets the minimum requirements. MIUI 13 firmware imposes more stringent hardware conditions than previous versions.

• 📱 Device model: Only Redmi 10 with codes is supported 21061119DG (global version and 21061119DI (Check the model in the Settings → The phone. → Model.
• 🔋 Battery charge: At least 60% Interrupted process due to discharge can lead to a blink (inoperability) of the device.
• 💾 Free space: Minimum 4GB on internal drive. firmware weighs ~2.5-3 GB, plus space for temporary files.
• 🔓 Unlocked bootloader: Custom firmware only. Official updates are installed without unlocking.

Also check the current version. MIUI: if you have MIUI 12.5 or later, transition to MIUI 13 will go smoothly. For older versions (e.g, MIUI 12) an interim update may be required.

⚠️ Note: If your Redmi 10 was purchased in China (model) 21061119DC), firmware MIUI 13 may contain restrictions, such as the lack of Google services, in which case it is recommended to use Xiaomi.eu or global firmware.

Official method: Update via OTA or Recovery

The safest method for installing MIUI 13 is Automatic Air Update (OTA), but it is not available for all regions and models.

1. Open Settings → About the phone → System update.
2. Click on the three-dot icon in the upper right corner and select Update Package (if you already have a.zip file downloaded with firmware).
3. If the update is available, the system will prompt you to download it. Confirm and wait for the download to be completed.
4. After downloading, press Reboot and Update. The device will reboot to Recovery mode and install the firmware automatically.

If OTA-Update is not available, you can try manual installation through Recovery:

• 🔗 Download the official package MIUI 13 for your model from the Xiaomi Firmware site (choose Stable or Weekly depending on your preferences).
• 📁 Rename the file to update.zip Put it in the root catalog of internal memory.
• 🔄 Reboot to Recovery (clip the power supply) + Volume up when the phone is off).
• 🖱️ Choose Install. update.zip and confirm installation.

⚠️ Warning: If after updating via Recovery, the phone is stuck on startup the Mi logo for more than 10 minutes, reset to factory settings via the same Recovery (Wipe Data item.

Install MIUI 13 via Fastboot (for power users)

If OTA And Recovery didn't work, so there's a method of Fastboot firmware, USB-It's a cable and basic command line knowledge:

• 🔄 Recovery of the device after failure;
• 🔓 Install firmware on the blocked bootloader (official versions only);
• 🛠️ Fixing errors such as Anti-rollback or Invalid image.

Instructions:

1. Download the Mi Flash Tool from Xiaomi’s official website and unpack the archive.
2. Download the Fastboot firmware MIUI 13 for your model (file with the extension.tgz or.zip).
3. Unpack the firmware into a folder with no path gaps (e.g., C:\MIUI13).
4. Turn off the phone and put it in Fastboot mode (clip Power + Volume down).
5. Connect the device to your PC and start MiFlash.exe.
6. In the program, click Select, specify the path to the firmware folder, then select Clean all (full clean) or Save user data (save data).
7. Press Flash and wait until it is completed (the process will take 5-15 minutes).

If the Mi Flash Tool is a Couldn't load device error, check:

• 🔌 Connection to USB (Try another port or cable);
• 🖥️ Are Qualcomm or MediaTek drivers installed (depending on your Redmi 10 processor);
• 🔒 Is the boot loader unlocked (for custom firmware).

Castom firmware: Xiaomi.eu and other alternatives

If the official MIUI 13 is not available for your region or you want advanced features, you can install custom firmware.

Installation of custom firmware requires unlocking the bootloader and installing TWRP Recovery. Here is a brief instruction:

1. Unlock the bootloader through the official Xiaomi tool (you will need a Mi Account and wait 7-15 days).
2. Install TWRP for Redmi 10 with the command: fastboot flash recovery twrp.img fastboot boot twrp.img
3. In TWRP, run Wipe → Format Data (this will delete all data!).
4. Copy the firmware on your phone and install it through Install.

⚠️ Note: Castom firmware can contain bugs, especially in the early stages of development. For example, Xiaomi.eu for Redmi 10 sometimes does not work. NFC Or a wide-angle camera. Before installing, check the feedback on the forums (for example, 4PDA or XDA Developers).

💡

Before installing custom firmware, check its compatibility with your Redmi 10 model by device code (21061119DG/DI/DC). Installing firmware from another model will lead to a blink!

Solving Common Mistakes When Installing MIUI 13

Even with the correct following of the instructions, errors can occur, and let's consider the most common and ways to eliminate them:

If you are experiencing overheating, rapid battery discharge or lags after installing MIUI 13, follow these steps:

• 🔄 Reset the settings to factory (Settings) → Additionally. → Reset);
• 🔋 Calibrate the battery (discharge to 0%, then charge to 100% without interruption);
• 🚫 Turn off unnecessary background processes in Settings → Battery → Energy saving regime.

💡

If your IMEI is missing or your network is not working, restore it using the engineering menu (#4636##) or the SN Writer Tool (requires your Xiaomi account).

Reverse to previous MIUI: When it is needed

Sometimes, after upgrading to MIUI 13, users encounter critical bugs, such as:

• 📵 There is no mobile network;
• 🔊 The speakers or microphone are not working;
• 🔥 Severe processor overheating.

In such cases, you may need to roll back on MIUI 12.5 or another stable version, but here’s a caveat: Xiaomi uses an Anti-Rollback mechanism that blocks the rollback on old firmware, which can only be circumvented by installing an intermediate version.

Step-by-step rollback instruction:

1. Download the latest version of MIUI 12.5 for your model.
2. If the current firmware is newer than the one you’re rolling back on, install the intermediate version first (e.g. MIUI 13 → MIUI 12.5.4 → MIUI 12.5.1).
3. Swipe the device through Fastboot with full clean (Clean all in Mi Flash).
4. After successful installation, reset the settings.

⚠️ Note: Retracement to old firmware may lead to data loss in the section /data, including photos and apps. Always back up through TWRP Mi Cloud before manipulation of firmware.

FAQ: Answers to Frequent Questions