How to uninstall the latest update on Xiaomi Redmi: 3 working ways (without the risk of “bricking”)

Updates MIUI Xiaomi Redmi is not always smooth: someone faces interface bugs, someone with battery discharge overnight, and some smartphones and completely stop turning on after the update. If you are in this situation, do not rush to carry the phone to the service. rollback updates are a real procedure, but it requires strict follow the instructions and understanding the risks.

In this article, we will discuss three official methods of removing the latest update (including the hidden method via Fastboot), explain how to save data before reset, and warn against typical errors that will turn your Redmi into a “brick.” All instructions are relevant for the Redmi Note 10/11/12, Redmi 9/10/11, POCO X3/X4 and other devices on MIUI 12-14.

⚠️ Critical Warning: Firmware rollback with unofficial tools (e.g. XiaomiTool or custom recavers type) TWRP) This article is only about methods that are approved by Xiaomi.

1. Method: Recovery (without data loss)

The safest method is to use the built-in Recovery Mode menu, which is suitable if:

• 📱 The smartphone is turned on, but it is unstable;
• 🔄 The update was installed less than 24 hours ago;
• 🔒 The bootloader is not unlocked (official firmware).

Steps:

1. Turn off Redmi by holding the power button.
2. Press Volume Up + Power before the Mi logo appears.
3. In the Recovery menu, select the language (volume buttons) and tap the “Rollback Update”.
4. Confirm the action and wait for the reboot (it will take 5-10 minutes).

Important: This method only works if the system has kept a backup of the previous version of MIUI. If the "Return" option is inactive, proceed to the next method.

Is the smartphone off?|Is the battery at least 50 times charged%?|Is there a backup of the data?|Original cable is connected (if required)-->

2. Method: Reset to factory settings (with loss of data)

If the recoil through Recovery is not available, and the smartphone at least turns on, a hard reset will help. This will delete all data, but return the device to the state of “out of the box” with the previous stable firmware.

Instructions:

1. Go to Settings → About the phone → Reset settings.
2. Select “Delete all data” and confirm with a password.
3. After the reboot, the device will suggest configuring it as new – skip this step and check the MIUI version in Settings → About Phone.

⚠️ Note: Some models (e.g. Redmi Note 11 Pro)+) If you reset, you can get back not the last stable firmware, but the one you bought. If it's an outdated version, upgrade to the current one through Settings. → Updating the system.

3. Method: Firmware via Fastboot (for power users)

If the first two methods fail, you have to run the firmware through Fastboot mode, which requires a computer, the original Xiaomi cable, and the official firmware for your model.

Preparation:

• 💻 Install Android SDK Platform-Tools (or Mi Flash Tool for Windows).
• 📥 Download stable firmware for your model from en.miui.com (select the Fastboot version).
• 🔌 Connect Redmi to PC in Fastboot mode (clip Volume Down) + Power with the phone turned off).

The firmware through the Mi Flash Tool:

1. Unpack the downloaded archive with firmware in a folder without Cyrillic symbols.
2. Open the Mi Flash Tool, press Select and point the path to the firmware folder.
3. Connect your phone (you have to decide how to do it). COM-port).
4. Select Clean All mode and press Flash.

It takes 5-15 minutes, and when it's done, it'll restart with a clean firmware.

1. to run the program on behalf of the administrator.

2. disable the antivirus (it can block drivers).

3. Use another USB-port (preferably 2.0).-->

4. How to save data before rolling back the update

Any of these methods, other than recoiling through Recovery, will result in data loss, to minimize damage:

⚠️ Warning: Don't rely on backups in Mi Cloud if the update is caused by a Xiaomi account failure. log in to another device first and check for backup availability.

Once a week | Once a month | Only before updates |Never-->

5. Common Mistakes and How to Avoid Them

Even experienced users make mistakes when rolling back updates.

• 🔋 Battery discharge: If the phone turns off while firmware is running, the risk of "bricking" is 90%. Charge it to at least 70%.
• 🔌 Unoriginal cable: Cheap USB-cables can interrupt data transmission. Use a branded one from Xiaomi.
• 📥 Installing firmware from another model (for example, Redmi Note 10 Pro instead of Redmi Note 10) will lead to an error EDL Mode.
• 🔒 Locking the bootloader: On new devices (Redmi 12 and later), the bootloader is locked!

💡

Before any firmware manipulation, check the phone model in Settings → About Phone → Model. Even similar devices (like the Redmi Note 11 and Redmi Note 11 Pro) have different firmware.

6 What to do if nothing helps

If all three methods failed, and the smartphone does not turn on or hovers on the logo, radical measures remain:

• 🛠️ Service center: Xiaomi’s official centers can reflash the device through the EDL-mode (cost - from 1500) ₽).
• 📡 TestPoint firmware: A method for advanced users that requires soldering contacts on the board.
• 🔄 Exchange warranty: If the update was installed through OTA, a phone for warranties - you can require a replacement under the law on consumer protection».

⚠️ Warning: Don't trust "masters" who offer to flash a phone in 5 minutes via TeamViewer.Crackers often lock devices and demand ransom.

FAQ: Frequent questions about rollback updates on Xiaomi Redmi