How to Sweat Xiaomi Mi 4A: A Complete Update Guide

Owners of Xiaomi Mi TV 4A smart TVs often face software upgrades to access new features or fix system bugs. The flashing process may seem difficult for a beginner, but with strict adherence to the algorithm, it takes no more than 15-20 minutes. The main difficulty is choosing the right method of installing software and preparing the bootable media.

There are several proven ways to install the Android operating system TV You can use the built-in update over the network if the current version of the system allows you to connect to the Internet, or you can perform a complete reinstallation through the Internet. USB-In rare cases, if there are serious failures, you will need to use specialized software on a PC.

Before you start any manipulation, it is critical to make sure that your TV model matches the Xiaomi Mi TV 4A exactly, since firmware from other versions (for example, 4S or 4X) can cause the device to fail. Carefully examine the sticker on the back of the case, which shows the exact model number and serial code. Only after rechecking the data can you start downloading the necessary files.

Preparation of equipment and choice of firmware

The first step is to find the correct operating system file.Official distributions are best downloaded from proven resources, such as the 4PDA forum or Xiaomi's dedicated repositories.The file usually has a.zip extension and weighs between 800MB and 1.5GB depending on the Android version and regional anchor.

You'll need it. USB-a 4GB drive, although modern 8-16GB flash drives will be a more reliable choice. FAT32, The TV loader often ignores the format. NTFS If there's any important data on the flash drive, copy it to your computer beforehand, because it'll be cleared during the preparation.

⚠️ Attention: Do not use USB-Hubs or extension cords during firmware. Connect the flash drive directly to the USB-The TV port closest to the power connector to avoid voltage loss and reading errors.

Once you download the firmware archive, you have to unpack it. Inside you'll find a file with the name of the species. MiTV4A_Global_...zip And that file, without any additional archiving, should be put in the root directory of the flash drive, and the folder structure should be as simple as possible, without any nested directories.

💡

Use it. USB-port marked 2.0 (usually black) if port 3.0 (blue) causes drive recognition errors during installation.

Local Update Method via USB

This is the most secure and common method for routinely updating or reinstalling the system while the interface is running, and the essence of the method is that the TV itself reads the firmware file from the external medium and installs it in the background, which saves user data unless a full reset point is selected.

Insert the prepared flash drive into the TV turned off. Then turn on the device and wait for the desktop to load. Go to the settings menu, select Settings, then go to the About Device section. Here you are interested in the Version bar, which you need to click 5-7 times in a row, until the notification about the developer mode or the update menu appears.

In the menu that opens, select System Update and click on the three dots in the top right corner of the screen. In the drop-down list, select Local Update. The system automatically scans the connected drives and finds the firmware file. If the file is found, the name and version will appear on the screen.

Once the selection is confirmed, the file verification process and subsequent installation will begin. The TV can be restarted several times, and the screen will display the progress bar. USB-drive until the process is complete and the desktop appears.

Using Recovery Mode for Clean Installation

If the operating system is so damaged that the interface does not load, or you want to perform a complete data cleanup, Recovery mode is required. This low-level menu allows you to install firmware regardless of the state of the main system. Entering this mode on the Xiaomi Mi TV 4A is performed by a combination of remote buttons.

Turn off the TV completely, disconnecting it from the network for 10-15 seconds. USB-Press the button on the remote (or the combination Back) + OK, depending on the version of the remote, and holding it, connect the TV to the power grid. Hold the button until the Mi logo or the Recovery menu appears.

In the Recovery menu, navigation is done with the volume buttons on the remote (or up/down buttons), and the choice is confirmed by the OK button. You need to select Install update.zip to /data/media/0 or the same one, indicating installation from USB.

Once you select the installation point, you will start the flashing process. Unlike the normal mode, the interface may look more primitive and take longer to process. Once you're done, select Reboot system now to reboot.

Firmware through a computer with MiFlash

This method is designed for advanced users and is used in cases where a software failure does not allow the use of regular TV facilities.

First, you need to put the TV in Fastboot or ADB mode. Often this requires the physical closure of contacts on the board or the use of a special combination of buttons when connecting the cable to the PC. After connecting, a new Xiaomi Android Bootloader should appear in the Device Manager.

Run MiFlash, select the path to the unpacked firmware (folder must contain the file) flash_all.bat At the bottom of the window, select the Clean all option to completely erase the old system. Press Flash and wait for the green success message.

⚠️ Note: MiFlash is the highest risk, and an incorrect firmware or process interruption can result in a motherboard being completely inoperable, and only repairable at a service center.

The process takes about 5-10 minutes. Once completed, the TV will automatically reboot to the new system. The first run can be lengthy, as the applications are optimized and system files are created.

Common mistakes and ways to solve them

During the update process, users often encounter an Update failed or Package verification failed message, which means that the checksum of the file does not match the expected amount, or the file is damaged during download, in which case you need to re-download the firmware, preferably from another source, and check the integrity of the archive.

Another common problem is the endless bootloop cycle after installation, which can be caused by a conflict between user data and the new version of the system, and the solution is to enter Recovery mode and execute a Wipe data command that will completely clear the internal memory of the TV.

If the TV writes "No command" in Recovery mode, try pressing the turn on button and briefly pressing the volume button, and the problem can also be in the remote itself: the dead batteries can lead to desynchronization of commands, so replace the batteries before starting critical operations.

💡

90% of firmware errors are due to poor quality USB-a storage device or a corrupted firmware file, not a malfunction of the TV itself.

Set up the system after the update

After successfully installing the new version of Android TV, the system will offer to go through the initial setup. You will need to select a language, connect a Wi-Fi network and log in to your Google account. It is recommended to check immediately for new updates in the Settings menu → About device → System update, as the version on the flash drive may not be the latest.

Please note that after a major update, some apps may not work properly. Go to Google Play Market → My apps and games and update all installed software, which will ensure the stability of media services and streaming platforms.

To optimize the system, it is recommended to remove unused applications and clear the cache. Go to Settings → Applications, select heavy programs and click Clear Cache. This will free RAM and speed up the interface response.