How to flash Xiaomi Redmi Go through your computer: the complete guide

Xiaomi Redmi Go is an affordable device that is often the first step into the Android world for many users. However, over time, the software can start to work unstable: errors appear, the system freezes or the battery runs out too quickly. In such situations, flashing through the computer becomes the only effective way to bring the gadget back to life without visiting the service center.

The process of updating or restoring software requires care and preparation, but it is quite feasible even for a beginner, if you strictly follow the algorithm, USB-The cable and the original Fastboot firmware, which contains all the system files, will be taken through from the driver installation to the final launch.

Before you start taking action, you need to make sure you understand the risks. Any interference in the system partition carries a potential threat of data loss, so backup is a must. If the phone is not turned on or is in a cyclical reboot, this method can be a salvation, but requires accuracy in every step.

Preparation of equipment and software

The first step is to build the necessary arsenal of tools. You will need the Redmi Go smartphone itself, a personal computer or laptop running Windows and a high-quality smartphone. USB-It is advisable to use an original cable or certified analogue, as cheap wires often do not provide stable data transfer, which can interrupt the recording process.

The main tool will be ADB & Fastboot Tools, which allows the computer to “communicate” with the phone bootloader, and an archiver (such as 7-Zip) will be required to unpack firmware files, as they are often delivered in a compressed format.

• 📱 Xiaomi Redmi Go smartphone with a battery charge of at least 60%.
• 💻 PC with Windows 7, 10 or 11 operating system.
• 🔌 USB-data transmission cable (not just charging).
• 📥 Installed Xiaomi drivers USB Driver.

It is important to check the status of USB-It is better to connect the cable directly to the motherboard (back of the system unit), bypassing the front panels or USB-hubs that may be under-powered, and connection stability is key to success.

⚠️ Warning: Use of a faulty or too long USB-The cable may cause the connection to break at a critical point in the recording of system files, which will turn the phone into a brick".

Make sure there is enough free space on disk C. Temporary files and process logs can take up space, and a lack of memory can cause a write error. It is optimal to have at least 5-10 GB of free space for comfortable work.

Where to download the official Fastboot firmware

There are two types of firmware for Redmi Go: Recovery and Fastboot. We need Fastboot ROM because it is designed to run through a computer and contains a complete system image. Recovery files are designed to be updated "over the air" or through the recovery menu and are not suitable for our purposes.

You should only download the system images from trusted sources. Xiaomi's official portal sometimes hides old models, so you can use authoritative firmware archives. Always check the region of the device to avoid problems with communication frequencies and preinstalled software.

Once the file is uploaded, the archive must contain a folder with multiple subfolders (images, firmware) and launch scripts, and the path to the folder must not contain Cyrillic characters or spaces so that the console commands are executed correctly.

• 🌐 Visit the verified resource with archives MIUI.
• 🔍 Find the Redmi Go (codename: olive).
• 💾 Download a file marked Fastboot for your region (Global, Russia, India).
• 📂 Unpack the archive in the root of the C disk: for convenience.

Pay attention to the Android version and build date. If you roll back on an older version of the system, you may need to unlock the bootloader, which is impossible without a formal procedure through Xiaomi servers.

Installation of drivers and login to Fastboot mode

The computer must correctly identify the device. To do this, install the Xiaomi USB Driver drivers. After installing the drivers, you need to put the smartphone into bootloader mode. To do this, turn the device off completely.

When the screen goes out, press the volume down button and the power button at the same time, hold them until an image of a hare repairing an android appears on the screen, or the words FASTBOOT, which signals that the phone is ready to receive commands.

Connect your phone to your PC with a cable. In Windows Device Manager, under "Android Devices" or "Ports (COM and LPT)" you should see an Android Bootloader Interface device. If "Unknown Device" is displayed, the drivers are installed incorrectly.

Sometimes the system automatically installs standard ADB drivers, which may not work correctly with Fastboot. In this case, through the Device Manager, you need to manually update the driver, indicating the path to the folder with the installed Xiaomi drivers.

⚠️ Note: If a device with a yellow exclamation point appears in the Device Manager, the firmware process is impossible.

The process of firmware smartphone through PC

Now, to the most critical stage, open the unpacked firmware folder. Inside, you'll find an executable file. flash_all.bat (Starting this script will automatically execute all the necessary commands to clean up memory and write new system files.

Launch the file on behalf of the administrator. A command line window will open, where lines of code will appear to indicate the progress of the process, and you will see messages about erasing and entries.

fastboot flash boot boot.img


fastboot flash system system.img




fastboot flash recovery recovery.img

The whole process takes 5 to 15 minutes depending on the speed. USB-At this time, you can't turn off the cable or interrupt the script. The screen of the phone can go out and light up, which is normal behavior when reallocating memory partitions.

After all operations are completed, the command line will be marked Finished. Total time: X.XXXs. The phone will automatically restart. The first run can last longer than usual, up to 10 minutes, as the system optimizes applications.

Table of errors and ways of their solution

Even with strict adherence to the instructions, technical failures can occur, and the following are the most common problems that users face when running Redmi Go firmware and how to fix them.

If you encounter a bootloader lock error, you will have to go through the unlock procedure through the Mi Unlock Tool utility.This requires a Mi Account tied to the device and waits between 7 and 168 hours, depending on Xiaomi's security policy at the time of firmware.

In case the phone went into an endless bootloop after running the firmware, try to execute the command fastboot reboot manually or press the power button for 15-20 seconds to force the restart. If that doesn't help, the firmware may have been chosen for the wrong model.

Initial data setup and recovery

Once you've successfully booted, you'll see a welcome screen. It'll be clean, like a store. At this point, it's important to take your time and set the basics right. Choose a language, connect to Wi-Fi to activate.

If you've previously backed up your Google or Mi Cloud account, the system will offer to restore your data, which is a convenient way to get your contacts, calendar, and app settings back, but you'll have to download the apps from the Play Market again.

💡

After the first download, don’t install all the apps at once. Give the system 10-15 minutes of background work to index files and optimize the battery.

It is recommended to check for security updates immediately. Go to Settings → About Phone → System Update. Even if you installed fresh firmware, patches could have been released during the release of the firmware.

Now your Redmi Go is fast and stable again, and a clean system installation often solves the performance problems that have accumulated over the years of using and installing multiple applications.

💡

Clean firmware via Fastboot is a radical but most effective method of treating software errors that returns the smartphone to factory performance.

Frequently Asked Questions (FAQ)