Restoring the Xiaomi Redmi 5 Plus to a critical failure or wanting to install custom Android build requires the use of specialized software on the computer. Unlike an over-the-air update, the PC method allows you to correct the consequences of failed experiments, remove virus software or bring the device back to life if it stopped booting. This approach is considered the most reliable, since it gives you complete control over the process of writing system partitions.
To successfully perform the procedure, you will need a stable connection, serviceable. USB-Errors in the driver preparation or firmware mode selection phase can cause the smartphone to remain in Fastboot mode or go deep brick. Below we will discuss in detail all the stages, from downloading tools to the final restart of the system.
It is critical to use the firmware version that is designed for your hardware revision, as the Redmi 5 Plus has different modifications of the processor and memory. Ignoring compatibility can lead to the failure of communication modules or complete failure of the touch screen.
Preparation of the workplace and loading of tools
The first step is to prepare the software environment on your personal computer. You will need to download the official Mi Flash Tool, which is the standard for working with devices on Qualcomm processors. In addition, you need to download the.zip firmware itself, corresponding to your region (Global, China, Russia).
Make sure there is enough free space on disk C, as unpacked firmware files can take up a significant amount of space. C:\Xiaomi_ROM, Avoid path encoding errors that often occur in Windows.
Don't forget to check the integrity. USB-Cheap charging cables often don't support data transmission, which will cause the connection to break permanently at the most inopportune moment. Use the original accessory or high-quality analog with thick wires.
Installation of ADB and Fastboot drivers
The computer will not be able to interact with the smartphone in bootloader mode without drivers installed. For Redmi 5 Plus, running on the Snapdragon 625 chipset, Qualcomm HS-USB QDLoader 9008 drivers and standard Android Bootloader Interface. Without them, the Device Manager will display unknown hardware.
The easiest way to install a universal driver package 15_seconds_ADB_Installer or use the built-in platform tools SDK Platform Tools. Once installed, it is recommended to restart your computer so that the registry changes take effect. You can check the installation by connecting your phone in debugging mode or Fastboot.
- 📱 Connect the switched off smartphone to the PC by clamping the volume reduction button.
- 💻 Open Device Manager in Windows and find Ports (COM and LPT)» Or "Android Device».
- ✅ Make sure the device is defined as Android Bootloader Interface without exclamation points.
⚠️ Note: If the device is displayed in Device Manager with a code error of 10 or 43, try connecting the cable to another device. USB-port, preferably directly to the motherboard, bypassing USB-hub.
Download modes: Fastboot and Recovery
Fastboot is a low-level protocol that allows you to send commands to write directly to your phone's memory, and the Redmi 5 Plus keyboard is used when the device is off.
There is also Recovery mode, which is used to locally install updates or reset settings, but for deep flashing through the PC, it is less suitable. In Fastboot mode, the smartphone screen usually shows a hare repairing an android and an orange indicator is lit.
What is the difference between Fastboot and 9008?
If the phone is locked or in a cyclic reboot, it can be difficult to log in to the Fastboot, in which cases it sometimes helps to hold the power and volume buttons for 15-20 seconds before vibration, after which the volume button is immediately clamped.
The process of firmware through the Mi Flash Tool
Once all the components are ready, you can start the main process: run the XiaoMiFlash.exe file on behalf of the administrator. In the program interface, press the Select button and specify the path to the folder with the unpacked firmware. Importantly, the path should not contain Cyrillic characters.
In the lower right corner of the window, select the firmware method. For a clean, lossless installation (theoretically), choose save user data, but for guaranteed error fixes, choose clean all. The clean all and lock option will lock the bootloader, which will return MIUI protection, but can cause problems when changing region.
☑️ Checklist before pressing Flash
Press Flash and wait for the process to be completed. The green progress bar will show the status of partition writing. The entire process takes 200 to 600 seconds depending on the speed. USB-port-size.
Solving mistakes and problems
In the process of firmware, errors may occur, the codes of which are displayed in the program log. one of the most common is the error "Missmatching image and device", which means that the firmware version and the hardware platform are incompatible.
If the process is stuck at 2% or 54%, it often indicates a Qualcomm driver issue or an unstable connection. USB-cable, use port USB 2.0 instead of 3.0 or reinstall drivers clean.
| Code/Error text | Probable cause | Decision-making |
|---|---|---|
| Flash All except data storage... | Wrong type of firmware | Use the Recovery version or change the method to Clean All |
| Missmatching image and device | The firmware is not for the Redmi 5 Plus | Download ROM strictly for the Vince model |
| Error: 0x80070005 | No access rights. | Run Mi Flash on behalf of the administrator |
| Waiting for device | Phone's not on Fastboot. | Reconnect the cable by clamping the buttons |
💡
If the Mi Flash Tool gives you a Not enough space error, make sure the firmware is fully unpacked and you choose the root folder of the firmware rather than the nested directory with images.
First start and initial setup
Once the firmware is successfully completed, the phone will automatically restart. The first run after the cleanan all can last up to 10 minutes, which is normal, the system optimizes files. Don't try to interrupt this process with the press of buttons.
Once the MIUI logo and welcome screen appear, you will be prompted to select a language and connect to Wi-Fi. Since the bootloader is likely to remain unlocked (unless the lock option is selected), the system may alert you to a security drop.
Be sure to sign in to your Mi Account and Google Account, which will enable device search functionality and restore backups of contacts and apps, and check the Android version under About Phone to make sure the installation is correct.
⚠️ Note: After unlocking the bootloader, some banking applications may fail due to a system integrity breach.
💡
Successful firmware through the computer is a guarantee of returning the phone to the factory state, but requires care when choosing a firmware file and the utility mode.