How to Get TRP on Xiaomi: The Complete Guide

Users of Xiaomi and Redmi smart TVs periodically face situations where standard boot of the Android TV operating system becomes impossible. The screen may remain black, the logo may hang indefinitely, or the system may cyclically reboot without reaching the desktop. In such critical moments, the only salvation is a recovery mode known as TV Recovery or TVRP. This is a hidden partition of memory that allows you to reset to factory settings, remove problematic updates or reflash the device.

However, getting into this mode on TVs is more difficult than on smartphones due to the lack of a physical touchscreen and a limited set of buttons on the remote. Standard combinations that work for phones often do not work here, and manufacturers specifically hide this opportunity from the average user to avoid accidental resets. However, there are several proven methods that allow you to activate the engineering recovery menu even on a locked device, and they require strict adherence to the sequence of actions.

In this article, we will discuss all the current ways to log into Recovery Mode for different models of Mi TVs. You will learn about methods using remote control, ways to activate through the system’s engineering menu and advanced options for connecting through a computer. Understanding these processes will help you reanimate the device without going to the service center.

What is TVRP and why is it needed?

TVRP (TV Recovery Partition) is a special service section in the TV memory containing a minimalist operating system that loads independently of the main Android and is designed solely for the maintenance of the device. The main functions of this mode include resetting user data (Wipe Data), cleaning the cache (Wipe Cache) and installing firmware updates from external media.

If your Xiaomi TV has stopped responding to commands, apps fly out instantly after launch, or the system reports a critical error, logging into Recovery is often the only way to bring the gadget back to life. It's important to understand that this is not a mode for entertainment, but a diagnostic and treatment tool.

⚠️ Warning: All recovery activities are done at your own risk. Incorrect command choices, such as partition formatting, can result in complete data loss or the TV turning into a brick».

Unlike smartphones, where the recapable menu looks graphic, on TVs the interface may be textual or non-existent, requiring blindness, so it is important to make sure that the device's power supply is stable before starting procedures.

💡

Before entering the recovery mode, be sure to turn off all the excess USB-devices (keyboards, mice, external drives), leaving only the remote or keyboard to enter if necessary.

Preparation of the device before entering the recovery mode

Before you try to activate hidden functions, you need to properly prepare the TV. Chaotic button presses on the device on rarely lead to success. The first step should always be a full shutdown cycle. Not just put the TV into sleep mode with the remote control, but physically de-energize it by pulling the plug out of the socket. This is necessary to reset the residual voltage in the control circuits.

The second important aspect is the remote control. TV Recovery requires a serviceable IR port remote or a working Bluetooth module. If you have the opportunity, connect a regular computer. USB-The keyboard to the TV socket, which makes navigation much easier if the standard remote stops responding.

It is also worth checking whether there is a free USB-In some cases, if the system is completely dead, it may be necessary to connect a flash drive with the correct firmware file, although this is rarely required to log into the menu itself.

• 🔌 Turn off the TV from the power outlet completely. 30-60 seconds.
• 🎮 Check the efficiency of the remote control or prepare USB-keyboard.
• 📺 Release one. USB-port in case of need to connect the periphery.
• 📸 Take a picture of your current network settings if you have access to the system, and then restore your Internet access.

Method 1: The combination of buttons on the remote (Classical method)

The most common way to get into the recovery menu on Xiaomi and Redmi TVs involves using a specific button combination on the remote when power is turned on.This method does not require a working operating system and works at the bootloader level. However, the combinations may vary depending on the year of release and the regional version of the device.

The most common sequence of actions is as follows: After disconnecting the TV from the network, you need to press the confirmation button (often a button with a picture of a circle or a circle «OK») And without letting it go, you can turn on the TV with a power button on the body itself or on the remote (if the remote supports it «OK».

Hold the buttons until the Mi or Android logo appears, and you may need to quickly press the Up or Down button on the remote to catch the recover loading moment, and if you see an image of an Android robot with an exclamation mark or a text menu with Recovery, Wipe Data items on the screen, it works.

⚠️ Note: Some new Google shell models TV Classic button combinations can be blocked by the manufacturer, and then you need to switch to software methods.

Method 2: Entry through the Engineering Menu and ADB

If the physical buttons don’t help, you can try to start the recovery mode software using debugging. ADB (Android Debug Bridge. This method requires that the TV boots up somehow and has access to settings. You'll need a computer connected to the same Wi-Fi network as the TV, or USB-Male-to-Male cable (for advanced users).

First, you need to activate the developer mode. → About the device → Build and press 7 times the build number. In the Developer menu that appears, turn on debugging. USB. After that, on the computer in the command line, you need to enter a command to connect to IP-TV address.

adb connect 192.168.1.XX:5555

Once the device status is successfully connected, you can send a command to restart in recovery mode.

adb reboot recovery

The TV will immediately restart and must go to the TVRP menu. If the standard command doesn't work, you can try to force the menu through system services, although this depends on the specific version of Android TV. This method is considered more reliable for modern models where hardware buttons are reprogrammed.

• 💻 Install the drivers. ADB and platform tools on the PC.
• 📡 Find out. IP-TV address in the "Network" section».
• 🔓 Activate debugging on USB op-ed.
• ⌨️ Execute adb reboot recovery in the terminal.

💡

Software input via ADB is the most effective way for modern Xiaomi TVs, as it bypasses the bootloader locks that act on the remote buttons.

Method 3: Use of the Reset button on the body

Many users overlook the physical Reset button on the TV body, which is usually a small recess that you press with a paper clip or a toothpick. On Xiaomi TVs, this button often serves the dual function of short reset and logging into the recavers with prolonged pressing.

The algorithm is simple: turn off the TV from the outlet. Find a hole marked with Reset or Input (in some models, the entrance to the Recovery is tied to the button for selecting the source of the signal when you turn on). Press the button inside the hole and, holding it, turn the TV on the network. Do not release the button until the special menu appears.

It's important not to confuse this with a conventional reset. If you press a button on the TV, you just reset. When you log in to TV Recovery, the power is critical when you're already pressed, and it forces the processor to check the button's status before you load the main OS.

If a menu with Recovery, Fastboot or Normal Boot options appears after the Mi logo, select Recovery using volume buttons (or navigation on the remote) and confirm with the power button.

Navigation in the menu and basic commands

Once in the recovery menu, you may encounter a lack of a graphical interface. Control is often done with volume buttons (if you have them on the remote or the case) to move up/down and the power button or "OK" to confirm. In some versions, navigation is performed by the "Up" and "Down" buttons on the remote.

The most important and most commonly used command is Wipe Data, which brings the TV back to factory status by removing all accounts, apps and settings, which is a solution to 90 percent of software problems, and there may be a Wipe Cache team that cleans temporary files without affecting personal data, which is useful in interface glitch.

Apply Update allows you to update the firmware with USB-For this purpose, the update file (usually) update.zip) However, on modern Xiaomi models, this feature is often blocked by signature verification, and you can install only the official firmware, the version of which is not lower than the current one.

⚠️ Note: Factory Reset or Wipe Data team permanently deletes all data. Make sure you have access to Google and Xiaomi accounts for re-authorization after reset.

After you have completed the necessary operations, select Reboot System Now for a normal restart. The TV will start as new and the initial setup will begin.

Possible problems and solutions

Even if you follow all the instructions, there can be difficulties. A common problem is that the TV ignores the commands of the remote when you boot, this can be due to the delay of the IR receiver, try to bring the remote as close as possible to the receiver (5-10 cm) at the time of switching on.

Another situation is entering Fastboot mode instead of Recovery. You can see a hare in a repair hat or text from a Fastboot. That's okay. Usually, this menu has the option to switch to Recovery, or you can just hold the power button for a long time (10-15 seconds) until the device turns off and try again with another combination.

If the TV is cyclically restarted and does not allow you to enter any menu, it may be damaged bootloader or system partition, in which case only the flashing through the service will help. UART-connector, which requires opening the case and the availability of soldering skills. For the average user in such a situation, the optimal solution is to contact an authorized service.

• 📉 If the remote does not catch the signal, use the phone flashlight aimed at the IR port of the remote (through the camera of the phone you can see the glow of the diode).
• 🔋 Make sure that the remote has fresh batteries, as the TV consumes more energy for IR radiation at the time of booting.
• ⏳ Hold the pause in 1-2 minutes between login attempts to allow the system to cool down completely and reset errors.

Frequently Asked Questions (FAQ)