How to reflash Xiaomi vacuum cleaner in Russian: the full guide 2026

Introduction: Why change the firmware language on Xiaomi vacuum cleaners?

Xiaomi vacuum cleaners are some of the most popular cleaning robots on the market, but many users face a problem: devices often come with Chinese or English firmware, which makes it difficult to adjust the schedule, manage through the application or interpret errors. Flashing into Russian solves these problems, but requires care: wrong actions can lead to a loss of warranty or even a device failure.

In this article, we will discuss the official and informal ways of changing the language suitable for Mi Robot Vacuum-Mop 2 Pro, Dreame D9, Viomi V3 and others. Special attention will be paid to security: from choosing the right version of firmware to backing up data. If you are not sure of your skills, you should contact specialists or use alternative methods (for example, Russified applications).

Important: the procedure for each model is unique. What works on the Xiaomi STYJ02YM may not work for the Dreame Z10 Pro. Always check the compatibility of the firmware files with your vacuum cleaner modification!

Which Xiaomi models support Russification?

Not all Xiaomi vacuum cleaners can be reflashed into Russian, here is the current list of models with confirmed language change (data for 2026):

• 🤖 Mi Robot Vacuum-Mop 2 Pro (STYJ02YM) — Russian official support through Mi Home
• 🤖 Mi Robot Vacuum-Mop 2 Lite (STYTJ02YM) — requires informal firmware
• 🤖 Dreame D9 — Russification through Dreamehome or custom software
• 🤖 Viomi V3 — Supports multichannel firmware (including Russian)
• 🤖 Mi Robot Vacuum-Mop P (SDJQR02RR) — Only through modified files

Models older than 2019 (for example, Mi Robot Vacuum 1S) usually do not have Russian firmware, for them the only option is to use an English-language application with a translator or buy devices with already installed Russian software (for example, versions for the European market).

Official ways to change language (without firmware)

Before you start flashing, check if you can change the language through standard settings. Many newer models support changing the language without tampering with system files.

Method 1: Mi Home/Dreamehome App

If your vacuum cleaner is connected to the Mi Home or Dreamehome app, try:

1. Open the app and select your device.
2. Go to Settings. → General. → Language.
3. If there is a Russian on the list, select it and confirm the change.
4. Restart the vacuum cleaner (hold the power button for 5 seconds).

⚠️ Note: Some models (e.g. Mi Robot Vacuum-Mop 2 Lite) block language change in the app if the device is originally intended for the Chinese market.

Method 2: Resetting to factory settings

Sometimes the language is dropped into English after it's completely reset.

1. Press and hold the Home + Power button for 10 seconds.
2. After the beep release the buttons - the vacuum cleaner will reset.
3. Connect to it again through the app and check the available languages.

💡

If Mi Home does not have Russian, try changing your account region to “Russia” or “Europe” in your profile settings.

Preparation for flashing: what to do in advance

Flashing is an interference with the system software of the device. To minimize the risks, follow the following steps:

Download the correct firmware version for your model |

Check the battery charge (at least 50%) |

Prepare. USB-cable (some models are required for some models) OTG-adapter)|

Backup your current settings (if possible)|

Make sure the vacuum cleaner is disconnected from Wi-Fi during firmware

-->

The most critical aspect is the choice of firmware, and using a file from another model or the wrong version will lead to the "bricking" of the device (completely inoperable).

• 🔗 Xiaomi Community Forum (Section for your model)
• 🔗 GitHub developer repositories (e.g. valetudo for alternative software)
• 🔗 Telegram chats for enthusiasts (e.g. Xiaomi Robot Vacuum)

Also prepare:

⚠️ Warning: If your vacuum cleaner is warranty-free, the flashing will cancel it, and the manufacturer may refuse to repair it, even if the fault is not related to the software.

Step-by-step: how to sew a vacuum cleaner Xiaomi in Russian

Consider a universal PC flashing method (suitable for most models). Take Mi Robot Vacuum-Mop 2 Pro (STYJ02YM) for example.

Step 1: Installation of drivers and software

1. Download and install the MiFlash Tool from the official Xiaomi website.

2. Install drivers for Qualcomm 9008 (needed to recognize vacuum cleaner as a vacuum cleaner) COM-port):

Download the archive with drivers by link (for example, with 4PDA)


Unpack and run the installation on behalf of the administrator




Restart the PC.

Step 2: Connecting the vacuum cleaner in firmware mode

1. Turn off the vacuum cleaner (hold the power button for 5 seconds).

2. connect it to the PC via USB-cable.

3. Press the Reset button (under the lid, next to the Wi-Fi module) and, without releasing it, connect the cable to the vacuum cleaner. Hold the button for 10-15 seconds until the PC makes a sound of connecting the new device.

⚠️ Note: If the vacuum cleaner is not defined as Qualcomm HS-USB QDLoader 9008 in Device Manager, repeat the step or check drivers.

Step 3: Recording firmware

1. Launch the MiFlash Tool.

2. Press Select and select the folder with the unpacked firmware (the file must have the.tgz or.img extension).

3. At the bottom of the program, select Clean All mode (complete rewriting of the software).

4.Tap Flash and wait until the process is over (usually 5-10 minutes).

After successful firmware, the vacuum cleaner will automatically restart. If the screen catches fire in Russian, congratulations! If not, see what to do if the firmware fails.

Alternative methods of Russification

If official or custom firmware is not available for your model, try these methods:

Method 1: Use of alternative software (Valetudo)

Valetudo is an open source software for robot vacuum cleaners that supports Russian, replacing standard firmware and adding advanced features (such as management without the Xiaomi cloud).

Installation:

1. Download Valetudo from GitHub.
2. Connect to the vacuum cleaner by SSH (instructions on the project website).
3. Download files via the command: scp valetudo.bin root@192.168.x.x:/tmp/ && ssh root@192.168.x.x"flash valetudo.bin"

Method 2: Russified annex

If the firmware is not available, install the modified Mi Home application with the Russian interface:

• 📱 Download. APK forum 4PDA (Section Xiaomi Mi Home").
• 📱 Install by allowing installation from unknown sources.
• 📱 Link the vacuum cleaner to the account with the region "Russia".

⚠️ Note: Modified applications may contain malicious code. Check files via VirusTotal before installing.

What to do if the firmware failed?

If the vacuum cleaner doesn’t turn on, flashes red or emits a constant beep after flashing, try these steps:

1. Hard reset: Hold the power button for 20 seconds. If it doesn't work, move on to the next point.
2. Re-routing: Try recording the original firmware through MiFlash in Clean All and Lock mode.
3. Manual EDL mode: For models on the Qualcomm processor, you can use the QFil utility: Connect the vacuum cleaner in EDL mode (close the test point contacts) Download the original firmware file (.mbn) Select the Flat Build option in QFil and specify the path to the file
4. Contact the service: If nothing helps, contact the authorized service center Xiaomi (indicate that the problem arose "independently").

In 80 percent of cases, the vacuum cleaner can be re-built with the firmware, and the key is not to panic or try to disassemble the device without experience.

💡

If the vacuum cleaner does not respond to the buttons after a failed firmware, but charges (charging indicator burns), the chances of recovery are high. If it does not charge, soldering equipment will be required to repair the board.

FAQ: Answers to Frequent Questions