How to roll back the update on Xiaomi Redmi Note 10 Pro: safe ways and pitfalls

MIUI updates for Xiaomi Redmi Note 10 Pro often bring new features, but sometimes instead of improvements, users are faced with bugs: sudden reboots, battery discharge in a few hours or broken sensors. If after the upgrade the smartphone began to slow down or critical applications stopped starting, rolling back to the previous version of the firmware can be the only solution. However, the procedure requires caution - the wrong actions will lead to locking the bootloader or loss of data.

In this article, we will discuss all working methods of rolling back updates on Redmi Note 10 Pro (codename sweet), including official tools from Xiaomi and manual methods through Fastboot and Recovery. Particular attention will be paid to the preparation of the device, choosing the right firmware and the typical mistakes that users make. If you have never stitched your smartphone before, do not worry: we will explain each step in detail so that even a beginner can cope without the risk of “bricking” the device.

Why You Might Need to Reverse the Update

Manufacturers rarely admit bugs in newer versions of MIUI, but Redmi Note 10 Pro users regularly face problems after updates.Here are the most common reasons owners decide to go back to old firmware:

• 🔋 Dramatic reduction of battery life - new versions MIUI Sometimes optimized worse than the previous, because of which the smartphone discharges in 4-5 hours instead of the usual 10-12.
• 🐢 System lags and hangs, especially when multitasking or running heavy games (Genshin Impact, Call of Duty Mobile).
• 📵 Network problems: mobile Internet goes missing, 5GHz Wi-Fi is not caught or communication is permanently cut off.
• 🔊 Sound distortion in speakers or headphones after audio drivers update.
• 🚫 Incompatibility with applications, such as banking programs or modified versions WhatsApp/Telegram.

Before you start rolling back, check if the problems are related to other factors:

The battery collapsed.|The smartphone started to slow down|Applications have stopped working|Network/sound problems|Other-->

⚠️ Note: If the smartphone stopped turning on after the update ("brick"), first try to go to Recovery Mode (click Power). + Volume up. If the screen is still black, don't try to sew the device yourself, contact the service center.

Preparation for rollback: what to do before the firmware

Reverse updates are not just a click of a button; improper preparation can result in the loss of all data (photos, contacts, messages) or lock the bootloader.

Backup your data via Mi Cloud or locally|Check the model and version MIUI at the Settings → The phone.|Download the correct firmware for your modification (Global/China/EEA)|Make sure the battery is charged >50%|Prepare the cable. USB and PC with installed drivers-->

Pay special attention to the choice of firmware. The Redmi Note 10 Pro has several modifications:

• 🌍 Global (sweet_global) — International market support for Google Services.
• 🇨🇳 China (sweet) – Chinese version without Google services, but with additional features MIUI.
• 🇪🇺 EEA (sweet_eea) — European version with observance GDPR.

You can’t install firmware from another modification, which will lead to permanent errors or complete device failure. To find out your version, go to Settings → About Phone → MIUI version and look at the postfix (for example, V12.5.3.0.RKFMIXM is Global).

Download the firmware only from official sources:

• 🔗 Official website MIUI (Choose the Stable version, not the Beta).
• 🔗 Xiaomi Firmware Updater (archive of all versions with chunglogs).

💡

If you're not sure about your firmware choice, download the last two stable versions and save them to your PC, so you can quickly go through it if something goes wrong.

Method 1: Recovery (without data loss)

The safest method is to use the built-in Recovery Mode, which is suitable if:

• 📱 You have an official firmware installed. MIUI (non-custom).
• 🔄 You want to revert to a version that was installed earlier (for example, with a V13.0.2.0 on V12.5.3.0).
• 💾 It is important for you to keep user data.

Instructions:

1. Download the desired version of MIUI in.zip format and rename the file to update.zip.
2. Move the file to the root directory of the smartphone’s internal memory (not to folders!).
3. Turn off the phone, then press Power + Volume up to enter Recovery.
4. Select the language, then go to Install update.zip to System One.
5. Confirm the installation and wait for the completion (it will take 5-10 minutes).
6. After the reboot, check the MIUI version in the settings.

⚠️ Note: If there is no Install option in Recovery update.zip, So, your version. MIUI It doesn't support rollbacks through this method.

This method does not always work – sometimes the system blocks the rollback on the old firmware due to anti-rollback (downgrade protection), in which case the Couldn't verify package or E:Footer is wrong error will appear.

💡

Recovery rollback is the easiest method, but it only works for official firmware and is not always available due to Xiaomi’s limitations.

Method 2: Fastboot Firmware (full reset)

If you don't get a retracement through Recovery, you'll have to use Fastboot, which is a mode that allows you to flash your device from your PC, and it deletes all the data, but it's guaranteed to work even when you block the anti-rollback.

• 🖥️ Windows computer 10/11 (on macOS/Linux There may be problems with drivers).
• 🔌 Original. USB-cable (not cheap charging!).
• 🛠️ Mi Flash Tool (download from the official website).
• 📄 Firmware in.tgz or.zip format (unpack it into a folder).

Step-by-step:

1. Install Qualcomm HS-USB QDLoader 9008 drivers (go with the Mi Flash Tool or download separately).
2. Turn off your smartphone, then press Power + Volume down to enter the Fastboot (a screen with a rabbit in a hat-eared).
3. Connect your phone to your PC. The Android Bootloader Interface should appear in Device Manager.
4. Launch the Mi Flash Tool, press Select and point the path to the unpacked firmware.
5. At the bottom, select Clean All (full reset) or Clean All and Lock (reset) mode. + loader-lock).
6. Press Flash and wait for completion (10-15 minutes).

If the Mi Flash Tool is not loading or critical error, try:

• 🔄 Reinstall drivers manually through Device Manager.
• 🔌 Use the other USB-port (preferably) USB 2.0 on the back of the PC).
• 🛠️ Run the Mi Flash Tool on behalf of the administrator.

Important: After Fastboot, the phone can boot longer than usual (up to 10 minutes).

Method 3: Using the official Xiaomi tool (for unlocked bootloader)

If you have a Bootloader Unlocked, you can use the XiaomiTool V2 utility, which automates the rollback process and reduces the risk of errors. The tool supports the Redmi Note 10 Pro and can:

• 🔍 Automatically determine the model and current version MIUI.
• 📥 Download the necessary firmware from official servers.
• 🛠️ Switching the device in semi-automatic mode.

Instructions:

1. Download XiaomiTool V2 from GitHub and install it.
2. Connect your phone in Fastboot mode (as in method 2).
3. Start the utility, select the Redmi Note 10 Pro (sweet) model.
4. In the Downgrade section, specify the target version of MIUI.
5. Click Flash and follow the program's prompts.

The advantage of this method is that it automatically checks the firmware compatibility with your device. However, the utility does not always work with the latest versions of MIUI, so check the relevance on the official Telegram channel before using it.

Common Mistakes and How to Avoid Them

Even when following instructions, users often make mistakes that lead to device lockdown or data loss, and here are the most common problems and solutions:

Another common problem is the loss of IMEI after firmware, which happens when you don't save /nvdata or you use an informal firmware to restore the IMEI:

1. Download the SN Write Tool (for Qualcomm processors).
2. Find the original IMEI (on the box or under the battery).
3. Connect your phone in EDL mode (testpoint or jung required).
4. Record the IMEI through the utility.

⚠️ Attention: Recovery IMEI It may be illegal in some countries, and if you're not sure, contact a service center.

How to save data before rollback

Most rollback methods (except Recovery) result in a complete reset of the device. To avoid losing important information, back up:

• ☁️ Mi Cloud: Go to Settings → Xiaomi account → Mi Cloud → Backup and save contacts, notes, SMS.
• 📱 Local Copy: Use the Mi Mover app (pre-installed on the MIUI) transferring files to another smartphone.
• 💾 Manual backup: copy folders DCIM (Photos), Download, WhatsApp on PC.
• 🔐 Applications: export data from banking programs, instant messengers (for example, Telegram has a function of exporting chats).

To back up your system settings (Wi-Fi, wallpaper, shortcuts) use the built-in MIUI function:

1. Go to Settings → Additional → Backup and Reset → Local Backup.
2. Select items to save (e.g. System Settings, Applications).
3. Click Backup and wait until it is completed.
4. The copy file will appear in the MIUI/backup/AllBackup folder.

After a rollback, restore data from the backup through the same settings section. Keep in mind that some apps (like WhatsApp) require separate recovery through their settings.

💡

If you are using Google Photos for backup, make sure that the original quality of the saved photo is enabled.

FAQ: Frequent questions about rollback updates