How to Update Xiaomi Mi TV 4X: All Ways + Error Solving

Xiaomi Mi TVs TV 4X (Including 43-inch, 50-inch, 55-inch and 65-inch models, the firmware updates regularly receive updates that fix bugs, add new features and improve performance. However, the update process can raise questions — especially if the TV is getting stuck on the Mi logo, can’t see firmware files, or gives an error. E10001. In this article, we will analyze all the current methods of updating (via the Internet, USB-Drive and Mi Home app, and solve typical problems faced by users.

It is important to understand that an incorrect update can lead to a "brick" (completely inoperable) of the TV, for example, if you interrupt the process or install firmware from another model (say, instead of Mi). TV 4X 55" download file for Mi TV 4A). So before you start, check the exact model of your device – it’s listed on the sticker at the back or in the Settings menu. → On TV.

If you're upgrading your TV for the first time, start with the automatic method -- it's the safest. Power users can try manual installation via USB, but there's a nuance about choosing the right firmware version and formatting the flash drive. Next up are the detailed instructions for each method.

1.Preparation for the update: what to do before the start

Before you update the Xiaomi Mi TV 4X, follow a few steps to avoid errors and data loss:

• 🔋 Remote charging: Make sure the batteries in the remote are not discharged. If the update is interrupted due to dead elements, the TV may freeze.
• 📶 Stable Internet: Automatic upgrades require speeds of at least 5 Mbps. Connect your TV to the network via an Ethernet cable (if possible) – this is more reliable than Wi-Fi.
• 💾 Backup: Save important settings (such as channel listings or linked accounts) – they may reset after the update.
• ⚡ Power supply: Do not use extension cords or network filters. Connect the TV directly to the socket to avoid voltage surges.

If you are planning to update through USB-drive, prepare a flash drive with a volume of 4 GB (preferably 8 GB) and format it in FAT32. Use the original cable USB 2.0 - Some flash drives USB 3.0 may not be recognized by the TV, and make sure that the drive does not have hidden files or viruses, which can interfere with the installation.

⚠️ Attention: If your Mi is yours TV 4X It was purchased in China (model with prefix). CN In the title, do not install firmware for the global version (Global) – this will lead to the inoperability of some functions, for example, Google Play or Netflix.

2. Method 1: Automatic update via the Internet

This is the simplest and most recommended method, and the TV itself finds the actual firmware and installs it without any additional actions.

1. Turn on the TV and connect it to the internet.
2. Go to the menu: Settings → About TV → System Update.
3. Click "Check Updates." If a new version is available, a notification will appear.
4. Confirm the download and wait until the process is complete (usually 10-20 minutes).
5. After the reboot, the TV will be ready to use.

If the update is not available, try:

• 🔄 Restart the TV (unplug the network for 30 seconds).
• 🌐 Change. DNS: In the network settings, specify 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).
• 📅 Check date and time: If they get lost, Xiaomi servers can block access to updates.

⚠️ Warning: If the TV doesn't turn on after the update or shows a black screen, wait 10-15 minutes - sometimes the first download takes a long time!

💡

Automatic updates over the Internet are the safest way, but require a stable connection to the network.

3. Method 2: Update through USB-storage device)

If the automatic update doesn’t work (for example, due to slow internet or regional restrictions), you can install the firmware manually.

• 💽 Flash drive. FAT32 (not NTFS exFAT!).
• 📄 Firmware file for a specific model of your Mi TV 4X.
• 🖥️ Computer for downloading and unpacking archives.

Where to get firmware:

1. Xiaomi’s official website for your region: 🌍 Global (for international versions). 🇨🇳 China (only for models with CN titled).

4PDA

XDA Developers

assemblies

How to install the firmware from the flash drive:

1. Download the archive with the firmware and unpack it. The file should have the extension.zip or.pkg.
2. Copy the file to the root of the flash drive (not to the folder!) and rename it to update.zip (if required).
3. Put the flash drive in. USB-TV port (it is better to use the port) USB 2.0, usually marked in blue).
4. Go to Settings → About TV → System Update → Update via USB.
5. Select a file and confirm the installation. The TV will restart and start the update.

⚠️ Note: If, after updating, through USB The TV is stuck with the Mi logo, which means the firmware was incompatible with your model, in which case only a rollback through service mode will help (see Section 6).

Download firmware from the official website | Format the flash drive in FAT32|Rename the file in update.zip|Insert the flash drive in USB 2.0 port |Do not remove the flash drive until the end of the update-->

Method 3: Update via the Mi Home app

If you have an Android or iOS smartphone, you can upgrade your TV through the Mi Home app, which is convenient if the remote is lost or not working.

1. Install the Mi Home app from Google Play or the App Store.
2. In the app, click "Add Device" and select Mi TV 4X from the list.

6. Service mode and firmware rollback

If the TV is not turned on or is fixated on booting, it may be necessary to log in to service mode (aka Recovery Mode), a method suitable for experienced users, as improper actions can permanently disable the device.

How to enter service mode:

1. Turn off the TV.
2. Press and hold the "Menu" button on the TV body (not the remote!).
3. Connect the power by continuing to hold the Menu until the recovery menu appears.

In the service menu you can:

• 🔄 Remove the firmware to the previous version (if it is stored in the TV memory).
• 🧹 Reset the settings to factory (Wipe) Data/Factory Reset).
• 📥 Install firmware with USB (similar to the manual method, but with additional options).

⚠️ Note: In service mode, you can not use the keys of the remote - only the buttons on the TV body (Volume) +/– navigation, OK choice).

If the TV does not respond to the buttons on the body, it can mean damage to the motherboard, in which case self-repair is impossible - diagnostics are required in the service center.

💡

Service mode is the last chance to restore the TV after a failed update, but you should use it only if other methods did not help.

7. How to check firmware version and update history

To find out which firmware is installed on your Xiaomi Mi TV 4X, follow the following steps:

1. Open the menu: Settings → About the TV.
2. Scroll down to the "Version of the Software" section.
3. This will include the current firmware number (e.g. MSP5.10.123) and the date of the last update.

If you want to see the full update history, you can do this through the Mi Home app:

1. Open the app and select your TV.
2. Go to "Device Settings → Updates".
3. There will be a list of all the versions with dates installed.

If the firmware version is outdated (for example, MSP5.8.xxx with the current MSP5.10.xxx), it is recommended to update - new versions fix security vulnerabilities and add support for modern services (for example, Disney+ or YouTube in 4K).

FAQ: Frequent questions about Xiaomi Mi update TV 4X