How to update Xiaomi Redmi Note 8 Pro: Full Guide

The Xiaomi Redmi Note 8 Pro, released in 2019, remains a popular device due to its balance between performance and cost.However, over time, the software needs to be updated to ensure data security and stability. The firmware update process may seem difficult to beginners, but if you follow the sequence of actions, it takes no more than 15 minutes.

Owners often wonder if they should upgrade to a new MIUI or wait for HyperOS to arrive. The answer depends on your current configuration and regional version. It is important to understand that switching between global and Chinese firmware requires unlocking the bootloader, which is a more complex procedure.

In this article, we will discuss in detail all available methods of updating, from the standard to the standard. OTA-Check before manual installation through Recovery, you will learn how to avoid typical errors and keep all data intact. Official support for the Redmi Note 8 Pro can be limited by region, so manual installation is often the only way to get fresh security patches.

Preparation of the device before the procedure

Before you start any manipulation of system files, you need to perform a number of preparatory steps. Ignoring this stage can lead to loss of personal data or software failures. Make sure that the battery is at least 60%, as the installation process requires stable power.

Make a full backup of all your important data. Use Google's cloud services or the built-in Mi Cloud app to save your contacts and photos. Local copying to your computer will also be a reliable option for protecting your information.

Free up enough internal memory. The update file can take anywhere from 2 to 4 gigabytes, and the system needs space to unpack and install it. Check for free space in the Settings → Memory section.

⚠️ Warning: Do not interrupt the installation process or attempt to manually restart the device when the logo appears MI. This can cause damage to the system partition and the need to flash through the computer.

A stable Wi-Fi connection is another requirement. Mobile Internet can be unstable, and charging traffic when you download large amounts of data will be an unpleasant surprise. VPN-Services and third-party antiviruses at the time of download.

Automatic updates through system settings

The easiest and safest way to get a new version of software is to use an inbuilt update mechanism, which checks for new packages and suggests installing them, a method that is suitable for most users who do not want to go into technical details.

To start the check, go to Settings → About phone. Click on the block with the MIUI version. The device will contact the server and check the current build. If the update is available, a download button will appear.

Once the file is uploaded, the system will suggest rebooting, the screen will go out, and the installation process will begin, which will be accompanied by animation and progress bar, during which time it will be impossible to use the phone.

• 📲 Go to About Phone in the Main Settings Menu.
• 📲 Click on the current version of the firmware MIUI or hyperos.
• 📲 Wait for the check to be completed and click Download.
• 📲 After download, select Reboot to start installation.

Sometimes the system says no updates, even though they're out, and that could be due to the incremental distribution of the packages to the regions, so you can wait a few days or use the manual method.

💡

The automatic method saves all user data and is the safest option for ordinary owners of the Redmi Note 8 Pro.

Manual installation via Recovery (OTA-package)

If the automatic check does not find updates, you can use the file selection function. This will require you to download the installation package from the official site or verified resources. The file must have the.zip extension and correspond to your current firmware version.

Put the downloaded file in the root of the device's internal memory. Don't put it in folders, the system should find it immediately when you open the update menu. Make sure the file name doesn't contain any extra characters.

In the update menu, click the three dots in the top right corner and select Select a firmware file. Find the downloaded archive and confirm the action. The system will check the integrity of the package and prompt you to start installing.

⚠️ Note: This method only works when you upgrade to a newer version of the same branch (e.g., from Global Stable to Global Stable).Attempting to roll back to the old version or change the region without unlocking the bootloader will lead to an error.

The installation process is similar to automatic: the phone will restart and start updating. Once complete, the device will switch on with the updated system. All user data must be stored.

Using the Mi Flash Tool app for PC

For more advanced users or if there are serious system failures, the method of updating through a computer is suitable. The Mi Flash Tool allows you to install full firmware images. This method requires the presence of ADB and Fastboot drivers on the computer.

Download the full Fastboot ROM for your model. Unpack the archive into the root folder of the disk, the path should not contain Cyrillic characters or spaces. Run the program on behalf of the administrator.

flash_all.bat

This command will run the firmware process with complete data cleaning. Be careful when choosing a mode: Clean All erases memory completely, and Save User Data tries to save files, but can cause errors when changing versions.

• 💻 Connect the phone off to the PC by pressing the volume down button (Fastboot mode).
• 💻 Choose the path to unpacked firmware in the program interface.
• 💻 Press the Flash button and wait for the green success indicator.

Using the Mi Flash Tool gives you complete control over the process, but requires technical literacy. Mistaking file selection or interrupting the cable can turn a smartphone into a brick.

Possible mistakes and ways to solve them

There may be a number of issues during the update process, and the error “Can’t get updates” is often associated with network issues or temporary unavailability of Xiaomi servers.

If the installation is stuck at a certain percentage, try clearing the cache of the System Update app. To do this, go to Settings → Apps → All Apps → System Update → Memory → Clean.

In some cases, the change helps. DNS-The servers are in Wi-Fi settings on 8.8.8.8. This allows you to bypass the local restrictions of the provider. It is also worth checking the date and time: incorrect settings can block the connection to the server.

Switching to HyperOS: Should I Update?

For owners of Redmi Note 8 Pro is relevant to the issue of transition to a new shell HyperOS, which replaces MIUI. The new system is optimized for working on devices with different amounts of RAM and should improve the responsiveness of the interface.

However, given the age of the Helio G90T processor, switching to heavy Android versions could affect autonomy, with users noting that the system indexes files in the first days after the update, causing heat and quick discharge.

If the current version of MIUI 12.5 or MIUI 13 is stable and you are comfortable with the functionality, you can refrain from the update for now. If you want new features and are willing to put up with possible bugs, the transition is justified.

• 🚀 Improved animation and visual effects of the interface.
• 🚀 Optimizing background processes to save energy.
• 🚀 Updated design of widgets and control center.
• 🚀 Improved work with files and clipboard.

⚠️ Note: After a major shell update, it is recommended to perform a full reset (Wipe All Data) to avoid conflicts between old configuration files and the new system.

💡

After installing a major update, let the phone lie down with the screen on and Wi-Fi connected for about an hour, allowing the system to perform background optimization of applications without your intervention.