How to Update Android on Xiaomi TV: 4 Proven Ways

Update of the Android operating system TV Xiaomi TVs are a key process for improving performance, fixing bugs and adding new features, but many users face challenges ranging from the lack of notifications for new versions to installation errors. In this article, we will analyze all the current ways to update the firmware on Mi. TV 4/4A/4S/4X/5/5 Pro/Q1/Q2 Other models, including hidden methods for power users.

It is important to understand that the update process depends on the version of Android. TV (From Android 8.0 to Android 12 on new models, firmware type (stable, beta or custom) and even the region where the TV is sold. TV We'll look at universal methods that work independently of these factors.

If your TV is stuck on the logo after a failed update or if it gives you an “Update failed” error, you will find a section at the end of the article that addresses these problems, and we will also uncover the myths about “hidden firmware” and explain why some updates only come through the help of a “hidden firmware” update. OTA (airborne), and others require manual installation.

1. Check the current version of Android and available updates

Before you start updating, you need to know the current firmware version and check if a new one is available, which will help you choose the right method of updating and avoid errors.

To find out the version of Android TV on your Xiaomi:

1. Take the remote and press the Settings button.
2. Go to Settings → About TV → The version of the software.
3. Take a picture or record the data: Android version (such as Android) 10) Assembly number (e.g, MTM9658_20231115) Model of television (e.g., television, L43M6-6ARU)

Check the availability of updates:

• 🔍 Go to Settings. → Update of the PO → Check for updates.
• 📥 If there is an update, the system will offer it to download (usually from 500 MB to 1.5 GB in size).
• ⚠️ If it says “No Update” but you know the new version is out, try the methods in the following sections.

Pay attention to the regional binding: Xiaomi TVs for Russia (RU), Europe (EEA) China (CN) They get different builds. L32M6-6ACN (China is not good for L32M6-6ARU (Russia, even if the models are identical in appearance.

Method 1: Automatic Internet Update (OTA)

This is the easiest and most recommended method, but it only works if:

• 🌐 The TV is connected to a stable Internet (preferably via cable, not Wi-Fi).
• 🔌 Enough free space (at least 2 GB on the system partition).
• ⚡ The battery is charged (so as not to interrupt the process).
• ⏳ The update is officially released for your model and region.

Step-by-step:

1. Connect your TV to the internet and make sure the connection is stable (check the speed in Settings). → Network).
2. Go to Settings. → Update of the PO → Check for updates.
3. If you find an update, click Download and wait until it is completed (it can take 10 to 60 minutes depending on the internet speed).
4. After downloading the TV will offer to install the update, confirm and wait for the reboot (this will take 5-15 minutes).

Make sure you have a stable Internet (better cable)

Connect the UPS or make sure there are no voltage surges

Charge the remote or use a spare

Record the current settings (brightness, sound, Wi-Fi)

Do not press buttons during installation-->

What to do if the update is not available?

• 🔄 Restart the TV and router, then repeat the check.
• 🕒 Wait 1-2 days – sometimes updates are rolled out gradually.
• 🌍 Check the region of the TV: if it is on China and you are in Russia, the updates may not come.
• 📡 Try connecting via mobile internet (phone tetering) – sometimes it helps to bypass the provider’s restrictions.

Method 2: Manual update through USB-accumulator

If the automatic update does not work or you want to install a specific firmware version, you can use it. USB-This method is suitable for all Xiaomi models. TV, including Mi TV 4A, Mi TV 5 Pro and Redmi Smart TV.

Important: Use a format flash drive FAT32 No more than 32 GB of file system NTFS Or exFAT doesn't work! Also avoid flash drives with LED-Indicators – they may interfere with the update process.

Instructions:

1. Download the official firmware for your model from the Xiaomi Support website or from the Xiaomi.EU forum (for custom firmware).
2. Unblock the file (usually this file) ZIP-archive) and copy the firmware file (with the extension.zip or.pkg) to the root of the flash drive (not to the folder!).
3. Rename the firmware file to update.zip (This is mandatory for some models!).
4. Put the flash drive in. USB-TV port (preferably to port) USB 2.0 if there are several).
5. Go to Settings → Software Update → Update via USB.
6. Select the update.zip file and confirm the installation.
7. Wait until the end (the TV will restart 1-2 times).

Critical information: If you install firmware from another model or region, the TV can turn into a brick (it won't turn on). TV 4A (India) is not compatible with Mi TV 4A (Russia, even if they are identical in appearance.

If, after updating, USB TV doesn’t turn on or hang on the logo, try it:

• 🔌 Turn off power for 10 minutes, then turn on again.
• 🔄 Repeat installation from another flash drive (possibly the first one was damaged).
• 🛠️ Use the recovery regime (see section 5).

Method 3: Update via ADB (for power users)

The method is Android Debug Bridge (ADB) This is suitable if the standard methods do not work, or you want to install custom firmware (for example, from Xiaomi.EU.

What you need:

• 💻 Computer with Windows/Linux/macOS.
• 🔌 Cable USB-A → USB-A (or USB-C, depending on the TV model).
• 📦 Utility. ADB Tools.
• 📄 Firmware file in.zip format.

Step-by-step:

1. Enable Developer Mode on TV: Go to Settings → About the TV. Press 7 times on the Android version until the message "You're a developer" appears. → For developers and enable debugging by USB.

File sharing (MTP)

adb devices

There should be a device with a serial number.

adb push update.zip /sdcard/

adb reboot recovery

Apply update from ADB

adb sideload update.zip

Wait until the end (the progress will be displayed on the TV screen).

1. Reconnect the cable.

2. Install Google USB Driver drivers.

3. Change the mode USB TV-wise MTP on PTP back and forth.-->

⚠️ Note: Some custom firmware (e.g. from Xiaomi.EU) require unlocking the bootloader:

• Reset all data (including installed applications).
• Loss of warranty (if the TV is guaranteed).
• Some features are not working properly (e.g. Google Assistant or Chromecast).

If you are not sure of your actions, it is better to use official firmware or contact the service center. TV Q1/Q2 processor-wise MT9653 Custom firmware can cause problems with HDMI 2.1 Dolby Vision and.

5. Method 4: Recovery System with Recovery Mode

If the TV doesn’t turn on after a failed update or is getting stuck on the Xiaomi logo, you can try to restore the system through Recovery Mode.This method will also help if you forget your password or the TV is locked.

How to log in to Recovery Mode:

1. Turn the TV off the socket.
2. Press the buttons at the same time: For Mi TV 4/4A/4S: Menu + Volume Down. For Mi TV 5/5 Pro/Q1/Q2: Power + Volume Up.

Without releasing the buttons, connect the TV to the outlet.

Keep the buttons clamped for 10-15 seconds until the recovery menu appears.

In the Recovery menu (manage volume buttons and confirm the button) OK):

• 🔄 Reboot system now – reboot (if the TV just freezes).
• 📥 Apply update from ADB — Installation of firmware through a computer (see section 4).
• 🗃️ Wipe data/factory Reset – Complete reset (deletes all data, including accounts).
• 🔧 Wipe cache partition – clearing the cache (safe, data is not deleted).

💡

If the TV does not respond to the remote buttons in Recovery mode, try connecting the keyboard or mouse over the phone. USB. Some Xiaomi models support management through USB-devices even in recovery mode.

⚠️ Attention: Wipe Item data/factory reset:

• All installed apps (including Netflix, YouTube, IVI).
• Wi-Fi settings and connected devices (such as a sound bar or game console).
• Google and Xiaomi accounts (re-authorization required)
• Local data (for example, saved passwords in the browser).

After the reset, the TV will reboot to its original state, like after the purchase, and you'll need to reconfigure the language, network connection, and log in to your accounts, and if there was a software failure, that should help.

6. Solving common errors during the update

Even if you follow instructions, you can get errors, and let's look at the most common problems and their solutions.

If the TV after the update:

• 🔊 Does not play sound – check the sound settings in Settings → Sound. → Output device (possibly lost profile) HDMI ARC).
• 📺 Does not show the image – try resetting the screen settings in Settings → Screen and sound → Resetting screen settings.
• 🌐 Does not connect to Wi-Fi – update your network settings or reset them via Settings → Network → Resetting network settings.
• 🎮 The remote is not working – try reconnecting it (click Back). + Home for 5 seconds or use the Mi Remote app on your phone.

If none of the methods worked, there may be a hardware problem (e.g., damaged eMMC memory), in which case we recommend contacting Xiaomi’s service center.

7. How to verify the authenticity of the firmware before installation

Installing unofficial or modified firmware can cause the TV to run unstable or lose warranty. To avoid this, always check the sources and integrity of files.

How to distinguish the official firmware:

• 🔗 Download files only from official sources: Official site of Xiaomi Update Server MIUI Xiaomi.EU (for experienced users only)
• 📜 Check the file name: it should contain the TV model and region: l43m6-6aru_global_20231115.zip — smack-in TV 4A 43" (Russia). q1e_eea_20260110.zip — firmware TV Q1E (Europe).
• 🔐 Check checksums (MD5). Official sites next to the firmware usually have a hash. Check it with the utility. WinMD5Free.

⚠️ Note: Firmware from torrents or unknown forums may contain:

• 🕵️‍♂️ Spyware (collection of data about your actions).
• 📉 Advertising (built into system applications).
• 🔧 Modified settings (e.g., disabled security updates).
• 🚫 Blocking features (e.g. Netflix in the 4K or Dolby Atmos).

If you downloaded the firmware, but are not sure of its authenticity, you can check its contents:

1. Rename the file from.zip to.rar.
2. Open the archive and check for files: META-INF — firmware. system.img or boot.img — system-partition. upgrade_config — Xiaomi configuration file.

.exe

.bat

8. Frequently Asked Questions (FAQ)