Xiaomi TV is always rebooted: reasons and 7 ways to solve

You turned on the Xiaomi Mi TV TV, Redmi Smart TV Xiaomi TV A Pro, but instead of the usual logo, you see the endless load cycle? The screen blinks, the device turns on and off, and sometimes it doesn't even have time to show the desktop? This problem is familiar to many owners of smart TVs of the brand - and it is solvable. In 80% of cases, it is not hardware failures that are to blame, but software failures that can be eliminated independently.

In this article, we will explore all possible causes of perpetual reboot, from damaged firmware to application conflicts, and give step-by-step instructions for restoring the TV, learn how to enter recovery mode, where to download official firmware, and what to do if you want to do something about it. TV It doesn't respond to the remote at all. USB-The storage device and the computer, so prepare them in advance.

Why Xiaomi TV is stuck in a reboot cycle: 5 main reasons

Infinite reboot (or "bootloop") is a state where the system can't complete the initialization process.The TV seems to get stuck between turning on and booting Android. TV. Here are the most common reasons:

• 🔄 Failed firmware update – interrupted download or installation of software through OTA (Airborne) often causes damage to system files.
• 📱 Application Conflict – Some programs (especially pirated ones) APK) They can block the system from loading.
• 🔋 Memory partition failure – damage to the eMMC file system or cache error (/cache, /data).
• ⚡ Power problems – unstable voltage in the network or a faulty power supply can cause failures when booting.
• 🛠️ Hardware malfunctions – less often physical breakdowns are to blame (for example, the dump of memory chips).

Typically, if the Xiaomi TV reboots without sound signals and without flashing the indicator (or blinks evenly), the problem is software. If the indicator blinks unevenly or clicks are heard, this may indicate a hardware breakdown, and without a service center can not do.

⚠️ Note: If Xiaomi TV is released before 2019 (e.g. Mi) TV 4A 32" or Mi" TV 4S 55), there is a high risk of wear and tear of the eMMC memory. In this case, even flashing may not help - you will need to replace the chip.

Method 1: Hard Reset via buttons on the body

The first thing to try is hardware reset, which works if the system still responds to commands, but it can't complete the boot. USB-accumulator.

Instructions for most Xiaomi models (including Mi) TV 4/4A/4S, Redmi Smart TV, Xiaomi TV A Pro):

1. Turn off the TV for 1 minute.
2. Press and hold the power button on the case (not on the remote!) and simultaneously connect the power cord to the outlet.
3. Hold the button for 10-15 seconds until the Xiaomi logo or recovery menu appears.
4. If you have a menu, select the Wipe option. data/factory reset (use volume buttons for navigation and power button for confirmation).
5. Confirm the reset and wait for the reset.

On some models (e.g. Xiaomi) TV Q2 75") instead of using a physical power button, a touch button is used:

• Press the touch power button for 10 seconds.
• Let go when the TV turns off.
• Repeat the pressing again - this can start the reset procedure.

⚠️ Attention: Hard reset will remove all installed applications, accounts and settings. You can't recover data after it - prepare a list of the applications you need in advance.

Turn off the TV from the socket

Find the power button on the body

Prepare a list of applications for recovery

Check for a backup copy (if any)

-->

Method 2: Enter recovery mode and clear the cache

If hard reset doesn't work or the TV is still loading into the loop, the next step is to clear the cache through Recovery Mode, a method less radical than a full reset and can help if the problem is in corrupted temporary files.

To enter Recovery Mode:

1. Turn off the TV.
2. Press and hold the volume down button (on the case, if any) + power-up.
3. Without releasing the buttons, connect the power.
4. Hold on for 10-15 seconds until you have a menu with a green Android robot.

Recovery menu:

1. Select Wipe cache partition (cleaning the cache).
2. Confirm the action.
3. After cleaning, select Reboot system now.

If the problem persists after the reboot, go back to Recovery Mode and run Wipe. data/factory reset (full discharge).

💡

If the buttons on the TV body are missing (like some Xiaomi models) TV A Pro, try holding the Home button on the remote control + The power button when you turn on. This sometimes opens the hidden menu.

Method 3: Flashing through USB (if the TV is not loaded)

If the previous methods didn't work, you've got to manually flash it, and this is a good way to do TVs that:

• 🔄 Getting stuck on the Xiaomi or Android logo TV.
• 🖥️ Not responding to the remote and buttons.
• 📛 Recovery Mode: No command error in Recovery Mode.

You'll need:

• USB-storage device FAT32, volume).
• Official firmware for your model (you can download it on the Xiaomi website).
• Computer to unpack the archives.

Step-by-step:

1. Download the firmware for your model (for example, for Mi). TV 4A 43" It's gonna be a file of sorts. lancelot_global_images_...).
2. Unpack the archive and copy the file update.zip root USB-storage device (not in the folder!).
3. Disconnect the TV from the network, insert the flash drive into the USB 2.0 port (usually marked as Service).
4. Press the volume reduction button. + power and power.
5. From the recovery menu, select Apply update from USB → specify update.zip.
6. Wait for the installation to finish (10-20 minutes) and restart.

⚠️ Warning: Never use firmware from third-party sources! Forum or torrent files may contain viruses or be incompatible with your model. Using unofficial firmware is unwarranted and can permanently "brick" the TV.

Method 4: Update via Fastboot (for advanced users)

If Xiaomi TV doesn't respond to buttons at all and doesn't load even in Recovery Mode, then it's the firmware on Fastboot. USB-A — USB-A (or USB-C, depending on the model) and command line knowledge.

Not all Xiaomi models are important TV Fastboot is supported. This method is guaranteed to work for:

• Mi TV 4/4A/4S (on an Amlogic processor).
• Redmi Smart TV X (Series 2020–2022.).
• Xiaomi TV Q1/Q2 (only with the unlocked loader).

Instructions:

1. Download Platform Tools (includes fastboot and adb).
2. Unpack the archive in the folder C:\platform-tools.
3. Download the firmware for Fastboot (file with the extension.tgz or.zip, for example) lancelot_images_...).
4. Unpack the firmware in the same platform-tools folder.
5. Turn off the TV, press the volume button + power and plug in USB-plug-in.
6. Open the command line in the platform-tools folder and do:

fastboot devices

(Serial number of the TV should be displayed).

fastboot flash boot boot.img


fastboot flash recovery recovery.img




fastboot flash system system.img




fastboot reboot

If the process is successful, the TV will restart normally, and if not, the bootloader may be blocked.

💡

Fastboot is the most reliable way to recover, but it's also the riskiest. A team error can cause your TV to be completely out of service. If you're not sure, go to the service center.

Method 5: Checking the power supply and capacitors

If all software methods have been tried and the Xiaomi TV is still restarting, the problem may be in the hardware.

• 🔌 Power supply - unstable voltage or bloated capacitors.
• 🔋 Condensers on the motherboard - over time they dry out and lose capacity.
• 🔌 Power cable – damaged wires or poor contact in the connector.

How to diagnose:

1. Turn off the TV and remove the back cover (if you still have a warranty, it is better not to take risks!).
2. Examine the power supply for the presence of bloated capacitors (they will be convex or with electrolyte dashings).
3. Check the power cable for physical damage.
4. If there is a multimeter, measure the voltage at the output of the power supply (should correspond to the indicated on the sticker, for example, 12V/2A).

If you find bloated capacitors, you can replace them yourself (costs from 50 rubles apiece).

1. Drain the old condenser with a soldering iron.
2. Install a new one with the same parameters (capacity, voltage).
3. Check the short circuit charge.

⚠️ Attention: Electronics requires experience! If you've never soldered, take the TV to the workshop.

Method 6: Contact Xiaomi Service Center

If none of these things work, or you're not sure about your abilities, there's an official service, and that's when you should go there.

• 🔧 TV warranty (usually 1-2 years from the date of purchase).
• 💥 There are signs of hardware breakdown (clicks, the smell of burning, uneven flashing of the indicator).
• 📛 Fastboot firmware ended in error.
• 🔄 The TV turns on but shuts off immediately (possibly an issue with the eMMC).

How to prepare for a visit to the service:

• Bring checks, a warranty card and a box (if preserved).
• Write down the serial number (on the back sticker) and the model.
• If you tried to sew it yourself, inform the master about it - it will help in the diagnosis.

The cost of repair in official Xiaomi services:

The addresses of official service centers can be found on the website of Xiaomi Russia.

Method 7: Alternative solutions (if nothing helps)

In rare cases, even a service center can't restore the TV, so there are alternatives:

• 🔌 Use as a monitor – connect through HDMI To do this, some models need to hold the Source on the remote when you turn on.
• 📺 Install third-party firmware – for example, LineageOS or CoreELEC (for power users only!).
• 🔄 Sell for spare parts – working matrixes, speakers and cases Xiaomi TV demand-driven.
• ♻️ Recycling with compensation - some stores (for example, the Messenger) accept old equipment at a discount on new.

If you want to use your TV as a monitor, consider:

• Only the image will work – control it. TV-applications will not work.
• In some models, the Mi TV 4S) When you connect to this, the sound only goes through HDMI ARC.
• Permission may be limited 1920×1080, even if 4K.

💡

To sell your TV for parts, take a photo of the internal boards (especially the power supply and motherboard) and post an ad on Avito or Yula with the hashtags #XiaomiParts, #TVdonar.

FAQ: Frequent questions about rebooting Xiaomi TVs