The Xiaomi Mi Electric Scooter 1S is not just a vehicle, it's a smart device that requires the right setup before you use it. Without a smartphone connection, you lose half of the functionality, from mileage tracking to fault detection, but many users have problems already at the interface stage — the scooter does not find the phone, the app gives an error, and Bluetooth shuts down after 10 seconds.
In this article, we will discuss all the ways to connect Xiaomi Scooter 1S to Android and iOS phones, including solutions to typical bugs. You will learn how to install the application correctly, what settings to check before pairing, and what to do if the scooter “can’t see” your smartphone.
What app do you need for Xiaomi Scooter 1S?
The official application for management Xiaomi Mi Electric Scooter 1S — Mi Home (formerly Mi Fit), but since 2023, the company has been transitioning to a new software, Xiaomi Home, which integrates the management of the entire ecosystem of devices of the brand. 1S It is supported by both programs, but the functionality is slightly different.
Here are the key differences:
- 📱 Mi Home is a classic version with a focus on scooters and bicycles, and it has detailed travel statistics, energy saving adjustments and manual firmware updates.
- 🏠 Xiaomi Home is a universal smart home app.Scooter features are simplified, but integration with other Xiaomi devices is added (for example, you can turn on a smart lamp when unlocking a scooter).
For most users, we recommend Mi Home, which has more tools for diagnosis.
- 🤖 Mi Home for Android
- 🍎 Mi Home for iOS
Preparation of the scooter for connection
Before pairing with the phone, the Xiaomi Scooter 1S must be fully charged (at least 50% of the battery) and be in standby mode. If the scooter is discharged or turned off, the Bluetooth module will not respond to phone requests.
Preparation checklist:
☑️ Preparation of Xiaomi Scooter 1S plug-in
Pay special attention to the power button: one short press will unlock the scooter, but to turn on Bluetooth, you need to hold it for 2 seconds until the white indicator lights up. If the indicator flashes red, the battery is discharged, you can not connect.
⚠️ Warning: Do not attempt to connect to the scooter while driving.This may cause the Bluetooth module to crash and require the device to restart.
Step-by-step: how to connect Xiaomi Scooter 1S to the phone
The pairing process takes no more than 5 minutes if you follow the algorithm. Consider connecting via Mi Home (for Xiaomi Home, the steps are similar, but menu items may be called differently).
Step 1: Launching the application and selecting the region
- Open Mi Home and click Add Device (+) in the upper right corner.
- Choose China, which is important because Xiaomi scooters are originally focused on the Chinese market, and if you choose Russia or Europe, the device may not appear on the list.
- Enter your Xiaomi account details (or sign up). Without an account, you can't connect.
Step 2. Find the device
- In the list of categories, select Transport → Electric scooter.
- The app will start searching. Make sure the scooter is on and near the phone (maximum 1 meter).
- When the Mi Electric Scooter 1S appears on the list, tap it.
Step 3: Bluetooth interface
- Press Connect and wait for the sound signal of the scooter (one long horn).
- The phone will be asked to access geodata and notifications – allow all requests, otherwise the connection will be unstable.
- After successful connection, the scooter will emit two short signals, and the main control panel will be displayed in the application.
💡
If the scooter is not there, try rebooting Bluetooth on your phone: turn off the module for 10 seconds, then turn it on again. On Android, this is done in the Quick Settings Panel, on iOS, in Settings → Bluetooth.
Common mistakes and their solutions
Even if you follow the instructions correctly, users often have problems. TOP-5 errors and ways of eliminating them:
| Problem. | Reason. | Decision |
|---|---|---|
| The scooter is not on the list of devices | Bluetooth scooter module disabled or defective | Hold the power button for 5 seconds to reset. If it doesn't work, check the battery power (≥30%) |
| The application gives an error "Connection failed" | Conflict with other Bluetooth devices | Turn off all other gadgets (earphones, watches) and reset your phone. |
| Scooter is connected, but data is not updated | Outdated firmware of a scooter or application | Update Mi Home to the App Store/Google Play. Then check the scooter version in the app settings |
| The connection is always broken. | Weak Bluetooth signal or interference | Make sure there are no obstacles between the phone and the scooter (bag, metal objects). |
| The application asks to update the firmware, but the process stalled | Unstable Internet connection | Connect your phone to Wi-Fi. If the update is hanging, don't turn off the scooter, wait 10 minutes. |
If none of these things worked, try resetting the scooter to the factory.
- Turn off the scooter.
- Hold the power button and the brake button at the same time for 5 seconds.
- Wait for the double beep - this is a confirmation of the reset.
⚠️ Warning: Reset will remove all travel statistics and user settings (e.g. speed limit).After the procedure, the scooter will be like a new one - you will need to reconnect to the phone.
Setting up the scooter parameters through the application
After a successful connection, you will be able to access the advanced settings of Xiaomi Scooter 1S. Here’s what you can configure:
- ⚡ Energy saving mode – reduces the maximum speed to 20 km/h but increases the mileage by 15-20%. Useful for long-distance travel.
- 🛡️ Children’s lock – limits speed to 10 km/h (activated via Settings) → Security).
- 🔋 Battery notifications – the app will alert you when the charge drops below 20% or 10%.
- 📊 Travel statistics -- you can store the history of the routes, the average speed and the energy consumption. CSV.
One of the most useful tools is malfunction diagnosis, and the device status section shows:
- 🔧 Brake condition (wear of the pads).
- 🌡️ Controller and battery temperature (critical for hot weather).
- 🔄 Firmware version and available updates.
How do you turn on Turbo mode?
Firmware update: why and how to do it
Regular firmware updates Xiaomi Scooter 1S fix Bluetooth bugs, improve energy efficiency and add new features, for example, version 1.5.2 has support for geofences – the scooter automatically locks when leaving the specified area.
How to update firmware:
- Connect the scooter to the phone via Mi Home.
- Go to Settings → Update firmware.
- If a new version is available, click Update.
- Wait until the process is complete (usually 3-7 minutes).
Important: during the upgrade, the scooter should be on a flat surface, and the battery should be charged at least 40%, and if the process is interrupted, you may need to contact a service center.
💡
Updating the firmware through the app is the only official way. "Manual" firmware from third-party sites can damage the scooter controller and deprive you of warranties.
Safety and care tips for scooter
Connecting to your phone is not only a convenience, it's also an added security, and this is what you should set up right after you pair it up:
- 🔒 PIN-Lock code, protects against theft. Set a 4-digit code in the app settings.
- 📍 Tracking by GPS — if the scooter supports the module GPS (basic 1S It's not there, but it's in Pro 2, enable geolocation in Mi Home.
- 🚨 Fall Notifications – the app will send an alert if the scooter changes position abruptly (for example, when falling).
Also, don’t forget about physical care:
- After rain, dry the scooter for 2-3 hours before charging.
- Check tire pressure every 500 km (normal: 2.5-3.0 bar).
- Once a month, lubricate the wheel bearings with silicone lubrication.
💡
If the scooter is not used for a long time (for example, in winter), store it with a battery charge of 40-60%. Full discharge or 100% charge on long-term storage reduces the battery life.