How to Reset Xiaomi Redmi Airdots 2: 5 Ways to Return Factory Settings

Xiaomi Redmi Airdots 2 wireless headphones remain among the most popular budget headphones TWS-But even such reliable technology sometimes requires factory resets, whether it's after a failed connection to a new smartphone, firmware glitch or a sound problem in one of the headphones. Unlike flagship models, Airdots 2 reset has its own nuances that are not always obvious to users.

In this article, you will find 5 proven ways to reset, from standard hardware to software solutions through a mobile application, we will also discuss why headphones can not be reset the first time and how to avoid the typical errors that lead to the "bricking" of the device. If your Redmi Airdots 2 stopped synchronizing, not determined by the phone or emitting strange sounds, this guide will help bring them back to life without going to the service center.

When do I need to reset Xiaomi Redmi Airdots 2?

Factory reset is not a universal solution to all problems, but in some cases it is really necessary. Here are the key symptoms for which it is worth trying the procedure:

• 🔄 The headphones are not synchronized with each other (one of them does not connect or flashes red)
• 📱 The device is not defined in the Bluetooth list on a smartphone or PC
• 🔊 The sound is interrupted, distorted or lost in one of the headphones.
• 🔋 Fast battery discharge (less than 2 hours of full charge)
• 🤖 Firmware glitches after updating (spontaneous shutdowns, failures when switching tracks)

It is important to understand that resetting will not help if the problem is related to physical damage, such as water entering the case or mechanical wear of contacts in the case, in which cases repair or replacement of components is required.

⚠️ Warning: If the headphones stop turning on after a fall or contact with fluid, the reset may make the situation worse.First check the integrity of the case and contacts of the charging case.

Method 1: Standard hardware reset (through a button)

This is the most reliable and versatile method that works even if the headphones are not determined by the phone, and the instructions are suitable for Redmi Airdots 2 all revisions (including versions with support for AAC and aptX).

Sequence of action:

1. Put both headphones in the charging case and close the lid.
2. Wait 10 seconds, then pull them back.
3. Press and hold the touchpad on both headphones simultaneously for 15-20 seconds.
4. The indicators will flash red and white, which is a signal of a successful reset.
5. Place the headphones back in the case, close the lid and wait 30 seconds.
6. Take it out and try to connect again via Bluetooth.

If the lights flash only red or do not react at all, try to repeat the procedure, first completely discharging the headphones (before turning off) and then charging to 100%.

Method 2: Reset via the Mi Home mobile app

If the headphones are somehow defined by the phone, you can try resetting through a proprietary app, which is less reliable than the hardware, but sometimes helps with software failures.

Instructions:

1. Install the Mi Home app (available for Android and iOS).
2. Connect the headphones to the phone via Bluetooth.
3. Open Mi Home, go to Devices → Headphones.
4. Select Redmi Airdots 2 from the list.
5. Click on the three dots in the top right corner and select Reset Settings.
6. Confirm the action and wait for the process to be completed.

Once reset, the headphones will automatically shut down. To reconnect them, remove them from the list of conjugated devices in the Bluetooth settings and follow the standard connection procedure.

⚠️ Note: Some versions of the Mi Home may not have a reset option, in which case use the hardware method or update the app to the latest version.

Method 3: Mi AI reset (for firmware 2023–2026)

In the latest versions of the firmware Xiaomi has added support for reset via voice assistant Mi AI. This method doesn’t work on all devices, but it can be useful for smartphone owners. Xiaomi/Redmi/Poco.

How to do this:

1. Activate Mi AI with a long press on the home button (or swipe from the bottom corner on gesture screens).
2. Tell the command to "Reset Redmi Airdots 2 settings."
3. Follow the voice prompts (confirmation of action will be required).
4. Once completed, restart the headphones by placing them in the case for 10 seconds.

If the voice assistant doesn’t recognize the command, try alternative wording:

• Return Redmi Airdots 2 to factory settings
• "Reboot the Xiaomi headphones."
• "To troubleshoot the connection of Airdots 2"

💡

Before using voice reset, make sure that your Mi AI settings enable access to Bluetooth devices (Settings → Applications → Mi AI → Permissions).

Method 4: Manual firmware update (if reset doesn't help)

If standard methods fail, the problem may lie in the damaged firmware, in which case a forced update via a special file from Xiaomi will help, which requires accuracy, but often solves problems with “bricked” headphones.

Step-by-step:

1. Download the latest firmware version for Redmi Airdots 2 from Xiaomi's official website (support section). The file must have the.bin extension.
2. Unpack the archive and rename the file to fw_update.bin.
3. Place both headphones in the case and connect it to the PC via USB-C.
4. Copy the file. fw_update.bin in the root catalog of the case (it should be defined as a removable drive).
5. Disconnect the case from the PC, take out the headphones and wait for the automatic update (the indicators will flash blue).
6. After completion (about 2-3 minutes), perform a hardware reset (Method 1).

⚠️ Warning: Do not interrupt the firmware update process, this may cause the headphones to fail completely.If the indicators flash red for more than 5 minutes, repeat the procedure from the beginning.

💡

Updating the firmware through the file fw_update.bin — The only way to bring back to life “brick” headphones that do not respond to a reset button.

Method 5: Alternative reset via ADB (for advanced users)

This method is suitable for those familiar with the Android developer tools, and allows you to reset your headphone settings through the command line, if they are determined by the system in any way.

Requirements:

• Smartphone on Android with enabled debugging on USB.
• Installed drivers ADB and Fastboot.
• Connected to the phone headphones Redmi Airdots 2.

Discharge commands:

adb shell


su




am start -n com.android.bluetooth/.opp.OppBluetoothResetActivity

If the command is successful, the headphones will automatically shut down. After that, perform a standard Bluetooth connection.

To check the current state of the headphones, you can use the command:

adb shell dumpsys bluetooth_manager

In the output, look for a line with Redmi Airdots 2 - there will be the current connection settings.

💡

If the su command doesn't work, then your smartphone doesn't have root rights, in which case use an alternative method via Mi Home or hardware reset.

Frequent Mistakes and How to Avoid Them

Even when following instructions, users often make mistakes that lead to even bigger problems. TOP-5 Failures and How to Prevent Them:

• 🔋 Discharged headphones: Reset at a charge level below 30% may be interrupted.Always charge the device to 100% before the procedure.
• 👆 Multiple pressing: If you hold the buttons on the headphones more than 1 second apart, the reset won't work.Push synchronously!
• 📱 Old PO: Headphone firmware 2020 This year may be a conflict with Android 13/14. Update the firmware before resetting.
• 🔌 Poor contact in the case: If the headphones are not charged in the case, clean the contacts with alcohol and check the integrity of the plume.
• 🔄 Interrupting process: Removing headphones from the case during reset causes failure. Wait for the indicators to blink!

If the headphones still don’t work after reset, check them on another device (like an iPhone or Windows PC) to help determine if the problem is in the headphones or in your smartphone.

FAQ: Answers to Frequent Questions