Xiaomi Mijia Quartz Watch is a unique combination of classic analog design and modern tracking technology. Unlike many digital competitors, this model uses physical hands controlled by embedded electronics, making them stand-alone and stylish. However, in order for the device to reach its potential, you need to perform the correct initial setup via a smartphone.
The activation process does not require deep technical knowledge, but requires careful attention to the sequence of actions. Mistakes in the pairing stage often lead to the fact that the watch does not display notifications or miscalculate steps. It is critical to install the application called "Mi Fit", since it is impossible to fully control it through the standard Bluetooth menu of a smartphone.
In this guide, we'll take you through all the steps from unpacking to fine-tuning notifications, how to calibrate your arrows, set your alarm with vibration, and solve typical connectivity problems. Your device's readiness to work depends on the correctness of these steps.
Initial preparation and installation of software
Before you start using, make sure your smartphone meets the minimum requirements. For stable operation, Mijia Quartz requires Android version 4.4 or higher, or iOS 8.0 and later. Also you need to turn on location (GPS), as modern versions of operating systems block the search of Bluetooth devices without permission to access the location.
The next step is to download the software you need. In Google Play or the App Store, find Mi Fit (Developer of Anhui Huami Information Technology) and then install it and create a Mi Account or log in to an existing one. Without authorization, synchronization will not work.
There's a small battery charge inside the watch, but for the first setup, you'd better charge it. Use the magnetic cable from the set: the contacts on the back cover should fit tightly to the pins of the charger. The indicator will light up to confirm the current.
☑️ Preparedness
Don't try to connect your watch through the standard Bluetooth menu in your phone's settings. If you see a device called MI Band or Quartz Watch on the list of available devices, ignore it. The pairing should be done strictly within the application interface.
The process of pairing with a smartphone
Open the Mi Fit app and go to the Profile tab. Click on Add Device and select Watch category. From the list of available models, find Mijia Quartz Watch. If the model doesn't show up immediately, make sure the filter doesn't hide the new items or try updating the list.
Once you select the model, the app will search. You don't need to press anything on the watch screen, it's in standby mode. When the phone detects the gadget, you'll see a pairing request on the smartphone screen. Confirm the action.
When you set up a connection, the clock can have a vibration signal or a flash of an indicator, which means that handshake has been successful, and now the devices exchange encryption keys.
⚠️ Warning: If the app is searching for the "Device failed to find" error, don't rush to restart the phone. Often the problem is that the watch has already "remembered" the previous connection. 10-15 seconds before reviving to reset the search mode, and try again.
Once successfully connected, the app will offer to update the firmware of the watch. Firmware is the software that controls the logic of the hands and sensors. Update can take several minutes, during which the smartphone screen should burn and the clock should be next to the phone.
💡
If the update process is suspended 99%, Don't panic. Leave your watch next to your phone on 10-15 Often the background process ends silently and the status will be updated after the app restarts.
Calibration of arrows and setting of time
One of the key features of the Xiaomi Mijia Quartz Watch is automatic time synchronization. Once the watch connects to the Internet via a smartphone, it automatically sets the exact time and date, given your time zone.
However, the physical position of the arrows may be lost during transportation or impact. To calibrate in the Mi Fit app, go to the settings of the connected clock and find the "Setting up pointers" (or "Calibration"). The system will ask you to combine the hour and minute hand with the "12 hours" mark using the "+" and "-" buttons on the smartphone screen.
After you have exactly aligned the arrows, press Save. The watch will remember the offset and then position the arrows correctly, which takes no more than a minute, but greatly improves the readability of the dial.
What if the shooters overlap each other?
And it's important to understand that the movement of the hands is the work of miniature motors, and they don't move smoothly, like in a smooth quartz watch, but they go Step-by-step, and that's normal for this design.
Configure notifications and functions
The main value of a smartwatch is the ability to receive notifications without removing the phone from your pocket. In the Mi Fit app, under "Application Notifications", you can choose which programs will duplicate messages on your wrist. WhatsApp, Telegram, SMS, calls and system events are available.
For each type of notification, you can adjust the vibration. The Mijia Quartz Watch has no speaker, so no sound will play. The vibromotor is powerful enough that you notice an incoming call even under the sleeve of your shirt.
Find your phone is also available, and when you activate this option in the app or on your watch (if the model supports the control from the case), the phone will start ringing loudly, which is useful when the phone is lost at home.
| Function | Description | Dependence on the phone |
|---|---|---|
| Stepper | Calculation of steps by accelerator | Autonomously. |
| Time. | Presentation of current time | Synchronization when connecting |
| Notifications | Text and calls | Active connection required |
| Alarm clock | Vibration at a given time | Autonomous (configured via phone) |
You don't expect this model to be able to respond to messages with voice or text, and the form factor and the lack of microphone/dynamics limit the functionality to just looking at the incoming information.
Use of alarm clock and timer
The alarm clock is set exclusively through the app. From the watch menu, select "Alarm clock", click "Add" and set the time. You can select the days of repetition (for example, only on weekdays).
When the time comes, the clock will vibrate, the duration of the vibration is limited so as not to drain the battery, to turn off the alarm clock, you need to press the button of the case or touch the sensor (if supported by the model), otherwise the vibration will stop itself in a minute.
The classic timer (countdown) in the basic functionality may not be available, depending on the firmware version. However, the "Stay of Motion" function can be used as an activity timer. The clock will vibrate if you sit still for an hour.
⚠️ Warning: The alarm will only work if the watch is not in deep energy saving or off. Make sure the watch has a battery charge by the time it wakes up.
Use the list in the app to set multiple alarm clocks, and the limit is usually 10-15 independent alarm clocks stored in the device's memory.
Solving Connection and Synchronization Problems
The most common problem is the loss of communication between the phone and the watch. If the app is "Disconnected" and Bluetooth is on, try this. Go to the phone's Bluetooth settings, find the device and hit "Forget this device" or "Sever a pair."
Then close the Mi Fit app completely (unload from memory) and run again. Repeat the search procedure. Often, a simple restart of the Bluetooth module on your smartphone helps.
If the watch stops responding to presses or freezes, perform a forced reboot. To do this, press the function button on the case for 15-20 seconds. The clock should vibrate and the hands will make a full circle, which means restarting the system.
💡
Connection stability is 90% dependent on the permissions given to the Mi Fit app. If you have denied access to background work or geolocation, Android can kill the synchronization process to save power.
In some cases, especially on Xiaomi, Huawei or Samsung smartphones, you need to add an app to the “Start” list and remove battery restrictions.
Energy consumption and maintenance
The autonomy of the Xiaomi Mijia Quartz Watch is one of their strengths. 2-3 week of active use, and this is achieved by not having a brighter color. AMOLED-Use and use of energy-efficient Bluetooth Low Energy.
Use only the original cable or certified analogues to charge. Using powerful power supplies from modern smartphones (with fast charging of 65W and above) can theoretically damage the watch’s power controller, although modern gadgets have protection.
Care for the case is simple: wipe with a soft dry cloth. Avoid getting aggressive chemicals, chlorine or salt water, as this can damage the moisture-retardant coating and cause corrosion of contacts on the back cover.
If you don't plan to use hours for more than a month, charge them to 60-70% and turn them off.Storing a fully discharged lithium polymer battery causes it to degrade permanently.