Xiaomi Mi True Wireless Earbuds Basic 2 is a budget-friendly yet functional solution for everyday use. It supports Bluetooth 5.0 technology, provides stable connectivity and offers up to 5 hours of battery life on a single charge. However, even with such simple devices, users often have questions about how to properly sync them to the phone, what to do if the headphones are not determined by the system, or how to reset them to factory settings.
In this article, we will take a look at the step-by-step instructions for connecting to Android and iOS smartphones, look at common errors and their solutions, and give recommendations for audio optimization. We will focus on nuances that the manufacturer does not always specify in the official documentation - for example, how to avoid disconnecting the connection when switching between devices or what to do if one earphone stops working.
Xiaomi Mi True Wireless Earbuds Basic 2
Before you start connecting, it is worth familiarizing yourself with the key parameters of the device that affect the pairing process and further work:
- 🔵 Bluetooth version: 5.0 (backward compatibility 4.2/4.1)
- 🎵 Codec of sound: SBC (basic), without support AAC or
- 🔋 Autonomy: up to 5 hours on a single charge, up to 20 hours with a case
- 📦 Headphone weight: 4.1 g each, case - 35 g
- 💧 Protection: IPX4 (squirt)
Important: Basic 2 headphones do not support multipoint (simultaneous connection to two devices), so switching between phone and laptop will require re-pairing, and there is no support for game mode (low latency), which can be critical for mobile games.
| Parameter | Meaning | Note |
|---|---|---|
| Communication range | 10m | No obstacles; indoors reduced to 5-7 m |
| Case charging time | ~2 hours | Through USB Type-C cable |
| Microphone sensitivity | -42 dB | Suitable for calls in a quiet environment |
| Support for voice assistants | Yes. | Google Assistant, Siri (via smartphone) |
If your phone supports Bluetooth 4.0 or lower, headphones can connect, but the stability of the connection will be worse and battery consumption higher.
Preparing headphones for the first connection
There are several mandatory steps to follow before pairing with your phone, and skipping any of them can result in the device not being found on the list of available ones.
- Charging headphones and case. Even if the indicator on the case is on, make sure that the headphones are charged at least 30%. To do this, place them in the case for 10-15 minutes - the indicator on the headphones should flash white (discharge) or burn red (charge).
- Remove the two earbuds, they must automatically turn on (white light flashes). If that doesn't happen, press and hold the touchpad on each earbud for 3 seconds.
- Pair mode activation: Basic 2 headphones go into search automatically when you first turn on. If they have already been connected to another device, hold the sensor on both headphones simultaneously for 10 seconds until the indicators start flashing red and white to reset the connection.
⚠️ Warning: If the headphones are on red for more than 30 seconds, it indicates a battery charge below 5.
Some MIUI firmware (e.g. MIUI 12.5 and below) may have a quick connection conflict, in which case, before pairing, disable Quick Device Connection in Bluetooth settings.
Charge the case and headphones|Remove both earphones from the case|Make sure the indicators flash white|Reset previous connections (if necessary)-->
Step-by-step: Connecting to Android
The process of pairing with Android phones (including Xiaomi, Samsung, Realme, etc.) takes no more than 2 minutes.
- Activate Bluetooth on your phone: Open Settings → Connections → Bluetooth. Translate the slider to the On position. Click Device Search (or Add a new device).
Find the headphones in the list
The Available Devices section should be called Mi True Wireless Earbuds Basic 2 (or Mi Basic 2).
- 🔄 Reboot Bluetooth on your phone (turn off/on).
- 📱 Make sure the headphones are in pairing mode (flashing white).
- 🚫 Check if they are connected to another device (like a laptop).
- Confirm pairing: Click on the headphone name in the list. The phone may be asked to confirm the code (usually 0000 or 1234). On the headphones, the indicators should stop flashing and burn white (successful connection).
Once you connect to the Bluetooth settings, next to the headphone name, you'll see a tick icon and Connect status, and you can listen to music or answer calls.
⚠️ Note: On Xiaomi phones with MIUI 13+ After connecting, a window can automatically open with a suggestion to install the Mi Earphones application. This is not necessary - Basic 2 headphones do not support advanced functions through this software.
💡
If the headphones are plugged in, but the sound is only one, check the audio balance in the phone settings: Settings → Special features → Stereo balance. Move the slider to the middle.
Connection to iPhone (iOS)
While Xiaomi is an Android-focused brand, the Mi True Wireless Earbuds Basic 2 headphones are compatible with the iPhone.
- 🍎 No support. AAC-codec: the sound will be transmitted by SBC, What could affect the quality.
- 📱 Limited functionality: Control gestures do not work (e.g., double tapping to call Siri).
- 🔋 Fast battery discharge: due to the features of iOS headphones can discharge 10-15% faster.
Instructions for connection:
- Open the settings → Bluetooth on the iPhone.
- Make sure the headphones are in pairing mode (flashing white).
- In the list of Other devices, find Mi True Wireless Earbuds Basic 2 and tap it.
- Wait for the status to be connected.
If the headphones are not connected:
- 🔄 Reboot your iPhone and headphones (put them in your case for 10 seconds, then pull them out).
- 🚫 Forget the device in Bluetooth settings (if it was already there) and repeat pairing.
- 📲 Update iOS to the latest version – in older versions there are bugs with Bluetooth 5.0.
Xiaomi/Redmi|Samsung|iPhone|Realme/Oppo|other-->
Solving Connection Problems
Even if you follow the instructions correctly, users are faced with common errors, and let's look at the most common ones and how to fix them.
Problem 1: Headphones are not defined by the phone
Causes and solutions:
- 🔋 Headphones/case discharged: charge them for at least 15 minutes.
- 📡 Too long distance: bring headphones to the phone for 10-20 cm.
- 🔄 Conflict with other devices: disable Bluetooth on all other gadgets (laptop, tablet).
- 🚫 Firmware failure: Reset the headphones to factory settings (hold the sensor on both headphones for 10 seconds until it blinks red and white).
Problem 2: Only one headphone is connected
This is one of the most common complaints.
- 🎧 Unsynchronized headphones: Put both in a case, pull out and wait 20 seconds - they should automatically sync (blink at the same time).
- 🔊 Incorrect phone settings: Check the audio balance (see tip above).
- 🛠️ Hardware malfunction: if the problem persists, the contact in the case or the earphone itself may be damaged.
Issue 3: Persistent communication breakdowns
If the sound is interrupted or the headphones are turned off:
- 📶 Interference from other devices: Turn off Wi-Fi or microwave (they work at 2.4 GHz, like Bluetooth).
- 🔄 Outdated phone firmware: update Android/iOS.
- 🎵 High bitrate audio: in the player, select the quality of 320 kbps or lower.
What if the headphones are connected but there is no sound?
Resetting headphones to factory
If none of these things worked, or you want to transfer the headphones to another user, do a full reset, which will remove all the connections you saved and return the device to its original settings.
Instructions:
- Place both headphones in the case and close the lid.
- Open the lid and get the headphones out.
- Press and hold the touchpads on both headphones simultaneously for 10-15 seconds.
- The indicators will flash red and white – this is a signal of a successful reset.
- Close the case cover and remove the headphones again - they are ready for a new pairing.
After reset, the headphones may require recharging, even if the battery level has been shown to be sufficient, and that's normal, the internal controller recalibrates the data.
⚠️ Warning: Do not reset if the headphones are less than 20% discharged.This can cause the firmware to fail and the device will stop turning on.
Optimization of sound and control
While Mi True Wireless Earbuds Basic 2 doesn’t support advanced settings through the app, you can improve sound and usability with system tools.
Customization of sound on Android
- 🎛️ Equalizer: Use the built-in equalizer in the player (e.g., Poweramp or Poweramp). AIMP) or set through the settings → Sound. → Equalizer (available on some firmware).
- 🔊 Bass amplification: Enable Audio Effects or Dolby Atmos (if supported by phone).
- 🎧 Mono mode: if one earphone is not working, activate mono sound in Settings → Special facilities → Rumor → Mono-audio.
Gesture management
The headphones support basic gestures:
- ⏯️ Single touch: playback/pause.
- 📞 Double touch: Acceptance/rejection of a call.
- 🔊 Triple touch: Calling voice assistant (does not work on all firmware).
Gestures are customizable only at the firmware level of the headphones and cannot be changed by the user.
- Check that the touches are performed in the center of the touch panel.
- Make sure the headphones are tightly seated in the ear (the vibration from the touch should be felt).
- Reset the headphone settings (see previous section).
💡
For better sound, turn off the Absolute Volume option (if any) in your phone's Bluetooth settings, allowing you to adjust the volume directly on your headphones without distortion.