Buying a new smart tracker is always a pleasant experience, especially when it comes to the popular Xiaomi Mi Band 6. However, when unpacking the device, many users face the first obstacle: the screen of the gadget does not light up, and the question arises how to start the system. This is absolutely normal for most modern wearable devices, as they come in transport mode to save battery energy while storing in warehouses.
Unlike older electronics, there are rarely physical power buttons on the case, activation occurs automatically when connected to a power source, you don't have to look for hidden holes or disassemble the case, just do a few simple things with the charging cable, and understanding this principle will save you from unnecessary worries and possible errors when you first start.
Further setup requires a smartphone with Mi Fitness or Zepp Life installed. It is through the software that the primary synchronization, timing and adjustment of all the functions of the tracker takes place. Without this stage, full use of the gadget is impossible, so preparing the phone is an important part of the process.
Checking the configuration and preparation for the first launch
Before you try to activate the device, you need to make sure that the complete set is complete. In the box with the Mi Band 6, you will find the tracker, strap and charging cable.
Carefully inspect the contacts on the bottom of the tracker capsule, they should be clean and have no trace of oxidation or protective film, sometimes the factory puts on transparent protection, which must be carefully removed before first contact with the charger.
⚠️ Warning: Do not attempt to charge a tracker from high-power Quick Charges (Power Delivery) with voltages higher than standard 5V unless you have the original cable.
To start the work you will need:
- 📱 Smartphone with Bluetooth 5.0 and higher.
- 🔌 USB-charging cable (comprised with).
- 🔋 Power adapter 5V/1A or USB-port.
- 📲 Installed Mi Fitness or Zepp Life app.
Make sure your smartphone is compatible with Android 6.0 or iOS 12.0 and up. Older versions of the software may not support the new data protocols used in the sixth generation of fitness bracelets.
How to turn on Xiaomi Mi Band 6: step-by-step instructions
The most important thing is to connect to charging correctly. Xiaomi tracker does not have a "Power" button, so the switching on happens only when the electric current is applied to the contacts. Take the charging cable from the kit and connect it to the power supply. USB-port.
Carefully remove the tracker capsule from the strap if it is not yet removed. combine the gold contacts on the back of the bracelet with the response pins on the cable. The magnets will pull the device into the correct position themselves, but make sure the contact is tight.
Once the contact is made, the screen should light up, the Mi or Zepp logo will appear on the display, which signals the start of the operating system boot, and if the screen is on fire, then the device is healthy and ready for further manipulation.
In some cases, the screen may not catch fire immediately, which may mean that the battery is completely discharged, leave the tracker on charge for 10-15 minutes, then repeat the procedure of disconnecting and connecting the cable.
What to do if the screen does not light up?
If after 15 minutes of charging the screen remains black, try to wipe the contacts with an alcohol wipe. Sometimes oxidation or fat from the fingers prevents the passage of current. USB-Port or cable: Connect to a smartphone and install an app After the screen is successfully activated, you need to link the bracelet to the smartphone, and the phone needs to have Bluetooth on. Don’t try to connect your device through the standard Bluetooth menu of Android or iOS settings – this will not give you full access to the features. Download and install the official app. Two main applications are relevant for the Mi Band 6: Zepp Life (formerly Mi Fit) and Mi Fitness. The choice depends on the region and personal preferences, but both support this model. Launch the application and log in to your Mi Account. click Add Device and select from the list "Mi Smart Band 6". The app will start searching for the gadget. At this point, a vibration pairing request may appear on the bracelet screen. Zepp Life Mi Fitness Interface Classic, detailed Modern, minimalist Synchronization Stable Fast Support Widgets Limited Extended Interface Language Full Localization After confirming the pairing, time and date settings occur automatically from the network, so you do not need to manually set the clock on the bracelet. When the device is connected, access to a wide range of errors is opened and the first updates are recommended. If a new version is available, follow the instructions on the screen. During the upgrade, don't disconnect the bracelet from your phone and keep them close to you. Next, you should adjust the information you display. You can choose which widgets will be available when swiping on the screen. It can be steps, pulse, weather, music or alarm clock, and the ease of use depends on the correct layout of the menu, and you can also choose a dial in the app. Mi Band 6 supports a huge number of dials, including animated ones. Download your favorite design through the dial store in the application, and it will automatically install on the tracker. 📊 What type of dial do you prefer?Analogue with arrowsDigital with large numbersMinimalistic blackAnimated with pictures Solving typical problems when turned on Sometimes the activation process is not smooth.If the bracelet does not respond to charging, check the integrity of the cable. The contacts on the Mi Band 6 cable itself are very thin and sensitive to mechanical damage. Another common problem is hanging when loading the logo, in which case you charge the device to 100%, and then discharge it to zero, leaving it on. After full discharge, put it on the charge again. ⚠️ Warning: If the bracelet heats up more than normal during charging (gets hot), immediately disconnect it from the mains. If the tracker is visible in Bluetooth but not connected in the app, try removing the device from the list of conjugated in the phone settings and re-search the app. Sometimes it helps to reboot the smartphone itself. In rare cases, you need to reset to factory settings. This can be done through the bracelet menu (Settings) → System system → Dumping) or through an annex. After successful switching on and setting, it is important to properly care for the gadget so that it lasts a long time. Mi Band 6 has water protection, but this does not mean that you can dive to the depth or take a hot shower with it. Regularly wipe the back panel of sensors from sweat and dirt. The accumulation of moisture under the strap can cause skin irritation or corrosion of contacts. Use soft tissue and some water, avoiding chemicals. Avoid deep battery discharge. If you do not use it for about a half a year, you just plan to use it in a cool place, or use it for about 60% of time. 💡Timely sensor cleaning and moderate charging (not higher than 90% with daily use) significantly prolong the life of a lithium-polymer battery (FAQ) Why doesn't the Mi Band 6 turn on even after a long charge? Probably the problem is oxidation of the contacts or a faulty charging cable. USB-If nothing works, maybe the battery failed. Can you use the bracelet without the phone? Basic functions like time mapping, pedometer and alarm clock work autonomously. However, for initial time settings, data synchronization and dial loading, the phone is required.How long does the Xiaomi Mi Band 6 charge? The full charge of the device takes about 2 hours.The on-screen indicator will show 100% when the process is completed. It's recommended that you don't leave the device on charge longer than you need to. How do you know if the bracelet is fully charged? The screen will show "100%" and a full battery icon. The app will show the corresponding status on the phone. When you fully charge, the lightning indicator on the screen usually disappears. Should you completely discharge the new bracelet? Modern lithium polymer batteries do not require "training" in full discharge cycles like old Ni-Cd batteries. You can use the device immediately after you buy it without waiting for full discharge.