Users of the popular Xiaomi Mi Band 5 fitness bracelet often face a situation where the device does not respond to touch immediately after unpacking or long-term storage. This is normal, since the gadgets are supplied from the factory with a discharged battery to save its life. To start using the tracker, you need to perform a series of sequential actions for initial activation.
The process of launching a smart bracelet does not require complex manipulations, but ignoring the basic steps can lead to a mistaken opinion about the malfunction of the gadget. In this article, we will discuss in detail all the steps of turning on, setting up and diagnosing possible problems associated with the lack of response of the device.
The first thing you need to do for a new or discharged tracker is to power it. Without enough lithium-polymer battery charge, the touch screen won't catch fire and the device won't be able to maintain a connection to the smartphone.
Connect the tracker capsule to the charger. Note that the Mi Band 5 uses magnetic charging, which is attached to the contacts on the bottom of the capsule. If the charging indicator does not catch fire, check the density of the contacts and the presence of voltage in the network.
☑️ Tracker's initial launch
Primary charging and screen activation
After connecting to the power source, the battery charge indicator should appear on the device screen. If this does not happen within 5-10 minutes, try to wipe the contacts on the capsule and charging cable with soft dry cloth to remove possible contamination or oxidation.
Once the charge reaches the minimum level, the tracker will automatically go into standby mode. To activate the screen Xiaomi Mi Band 5 you need to touch the touch area or raise the wrist if the wrist lifting function is already activated. In some cases, you need a short press on the touch button under the screen.
⚠️ Warning: Do not attempt to charge the tracker from powerful fast charging power supplies for smartphones, as this could damage the power controller. USB-computer port or adapter with current 1A.
It is important to wait until the battery reaches at least 20-30% before taking active pairing actions, which will ensure that the Bluetooth module will work smoothly during the initial data synchronization.
💡
To extend the battery life, try not to discharge the device to zero and do not leave it on charge for more than 2-3 hours after reaching 100%.
Connecting with a smartphone through the application
The main tool for managing the bracelet is the Mi Fit mobile application (or Xiaomi Wear), without installing this software, you will not be able to fully turn on and configure the device, since the initial activation requires confirmation through an account.
Launch the app on your smartphone and sign up or log in to your Mi Account. Go to Profile and select Add Device. From the list of available gadgets, find the Mi Smart Band 5 and click on it to start your search.
- 📱 Make sure that your smartphone is Bluetooth enabled and GPS (geolocation, as these are prerequisites for device detection.
- 🔋 Check that the bracelet is near the phone (no more than a distance away). 1-2 meters).
- 🔄 If the search doesn’t produce results, reboot Bluetooth on your phone and pull the list of devices in the app down for an update.
When the app detects the tracker, the wristband will display a vibration and pairing request. Press the touch button to confirm. After the successful connection, the time and basic settings will be synchronized.
Configure the main functions after inclusion
After successful pairing, it is recommended to immediately configure key parameters for comfortable use. The application menu provides settings for dial, time format, measurement units and notifications.
Special attention should be paid to setting up notifications to avoid missing important calls and messages. In the section "Profile" -> "Notifications" you can select specific applications, data from which will be displayed on the bracelet screen.
It is also important to adjust health parameters, such as target number of steps, motion reminders, and sleep monitoring, which will be used by algorithms to build activity analytics.
| Parameter | Description | Recommendation |
|---|---|---|
| Language | Menu interface language | Russian (if available) |
| Vibration. | Power of response | Medium or high |
| Screen. | Lighting time. | 5-10 seconds |
| Dial | Screen appearance |
Hidden settings of Mi Band 5
Problems with inclusion: diagnosis and solutions
If the bracelet does not turn on even after a long charge, there may be a software failure or a deep battery discharge, in which case a forced reboot or reset is required.
To reboot, go to the bracelet menu (if the screen is responding), find System or More, and select Reboot. If the screen is not working, you can try plugging the device into charging and tapping the touch area several times quickly.
⚠️ Warning: If the device was without charge for more than 6 months, the battery could go into a deep discharge. Leave it on charge for several hours, even if the indicator does not immediately light up.
In case of software errors, a complete reset to factory settings may be required, which will delete all accumulated data from the bracelet itself, but it will remain in the application on the smartphone if the synchronization has taken place earlier.
Resetting and reconnecting
Sometimes, to restore functionality, you need to remove the device from the list of paired smartphones in the Bluetooth menu and re-assign through the application, which helps eliminate conflicts of communication protocols.
To reset through the app, go to the device profile and select "Disable" or "Delete." Then, select "Reset" from the bracelet menu (if it is enabled). If the menu is not available, use the "Forget device" function in the phone's Bluetooth settings.
- 🔌 Disconnect the bracelet from the charger before resetting.
- 📱 Remove the device from the Bluetooth list on your phone.
- 🗑️ Perform a reset via the tracker app or menu.
- 🔄 Repeat the pairing procedure again.
Once reset, the device will return to factory settings, and you will need to reconfigure the language, time and notifications, a standard procedure that often solves problems with the "hang" of the interface.
💡
Complete resetting is a radical, but often the only way to restore the bracelet to software errors.
Features of the sensor and screen
The Mi Band 5 is AMOLED, which provides a bright picture and rich colors, but it is sensitive to mechanical damage and temperature changes.
The sensor layer responds to finger touch, and if you use a thick protective film, the sensitivity may decrease, and in such cases, calibration or removal of the protective coating is recommended.
The wrist lift function works on the basis of a gyroscope and an accelerometer, and if it doesn't work properly, try changing the angle of rotation of the wrist or reconfiguring the sensitivity in the app, and it may not work if the hand is in an unnatural position.
⚠️ Warning: Do not expose the device to extremely low or high temperatures as this could cause irreversible damage to the screen and battery.
To save energy, the screen automatically goes out a few seconds after activation, which is the normal behavior of the device, not a malfunction. You can increase the backlight time in the settings, but this will speed up the battery drain.