Xiaomi Mi Airdots Pro 2: how to connect to a smartphone in 2 minutes (with photo)

Xiaomi Mi Airdots Pro 2 is one of the most popular wireless headphones in the Xiaomi lineup, combining high-quality sound, convenient ergonomics and affordable price. However, even with such a simple device, users often have questions: how to properly sync headphones with your phone, what to do if one earphone does not connect, or how to reset to factory settings. In this article, we will analyze all possible ways of connecting, including nuances for Android and iOS, and give practical tips to fix typical problems.

Structurally, the Mi Airdots Pro 2 is not much different from the previous models in the series, but has important improvements: support for Bluetooth 5.0 protocol, reduced audio latency and improved autonomy. However, the pairing process can be difficult for beginners - especially if the headphones have already been connected to another device or were in standby mode for too long. We will describe each step in detail so that you can set up the headphones the first time, and also explain why sometimes forced reset through holding the button for 15 seconds is required (this is not stated in the official instructions!).

1. Preparation of headphones for the first connection

Before you start pairing, make sure your Mi Airdots Pro 2 is ready to go.Here are key points that are often overlooked:

• 🔋 Charging headphones and case: even if the indicator on the case is green, it does not guarantee that the headphones themselves are charged. Remove them from the case and check that if the red indicator on the headphones does not light up when you press the touch panel, they need to be charged (put back in the case for 10-15 minutes).
• 📱 Smartphone compatibility: headphones work with any Android 5.0 devices+ iOS 10+, But for full operation (for example, displaying the charge level) on Android requires version 6.0 and higher.
• 🔄 Resetting previous connections: If the headphones have already been paired with another device, they can automatically try to connect to it. To avoid this, reset (instructions in the next section).

Pay special attention to the physical condition of the headphones. Check if the contacts in the case are oxidizing or dirt - this can prevent charging. Wipe the contacts with a dry wipe or cotton swab dipped in alcohol. Also make sure that the left and right headphones are synchronized with each other (this is indicated by the synchronous blinking of white indicators when extracted from the case).

⚠️ Warning: If one of the headphones is completely discharged (the indicator does not respond to presses), connection will not be possible. Charge both earphones in the case for at least 30 minutes before the first attempt to pair.

2. Standard connection to Android-smartphone

The process of connecting to Android devices is as simple as possible, but has its own nuances.

1. Remove the headphones from the case. They will automatically turn on and go into pairing mode (the indicators will flash alternately red and white).
2. Activate Bluetooth on your smartphone: go to Settings → Connections → Bluetooth (the path may vary depending on the firmware).
3. Find the device in the list of available headphones should show up as Mi Airdots Pro 2 or Mi True Wireless Earphones 2 (depending on the region).
4. Press "Connect." The system can request a pairing confirmation -- agree.

Once successfully connected, the headphones will light up in blue (or white, depending on the firmware version) and stop flashing. In some cases, additional confirmation may be required to use the microphone or access contacts - this is normal for Android 10+ devices.

Remove both earphones from the case

Make sure the indicators flash red/white

Turn on Bluetooth on your smartphone

Remove old Mi Airdots devices from the list of associated devices (if any)

Confirm the conjugation in the dialog window-->

If the headphones don’t appear in the list of devices, try:

• 🔄 Reboot Bluetooth on your smartphone (disable/enable module in settings).
• 📵 Remove and insert the headphones back into the case, then remove again.
• 🔋 Check the case charge – if it is discharged by less than 20%, the headphones may not turn on.

3. Connection to iPhone (iOS) and features of the work

The pairing with an iPhone or iPad is almost the same as Android, but there are a few important points:

1. Open Settings → Bluetooth on iOS.
2. Remove the headphones from the case – they should appear on the list as Mi Airdots Pro 2.
3. Click on the device name to connect. It can take up to 10 seconds.

On iOS, you won’t see the headphone charge level in the status bar (unlike AirPods), but it can be checked in the battery widget (scroll the screen left on the home screen).

• 🎵 Sound codecs: Mi Airdots Pro 2 are used AAC iOS, which provides good sound quality, but there may be a slight delay when watching videos.
• 📞 Microphone: When calling, headphones will use a built-in microphone, but its sensitivity is lower than that of the AirPods.
• 🔊 Volume: Volume control through the buttons on the headphones works, but the volume step on iOS is less than on Android.

⚠️ Attention: On iOS 14+ There may be a problem when the headphones are connected only in mode. HFP (for calls, not A2DP (To fix this, go to Settings. → Bluetooth, find Mi Airdots Pro 2, click on the "i" icon and select "Forget this device." Then reconnect.

4. Resetting headphone settings (if not connected)

If the Mi Airdots Pro 2 refuses to connect, blinks out of sync, or one of the headphones doesn't work, you'll need a complete reset, which removes all the stored connections and returns the headphones to factory settings. Here's how to do this:

1. Put both headphones in the case and close the lid.
2. Open the case cover and hold the button on the back of the case for 15-20 seconds (the indicator on the case will flash red, then white).
3. Remove the headphones from the case - they should synchronize with each other (the indicators will flash alternately).
4. Now you can reconnect the headphones to the smartphone (instructions in the sections above).

After reset, the headphones will automatically connect with each other (left becomes lead, right - follow). If the synchronization has not occurred (the indicators flash chaotically), repeat the reset procedure or check the charge of the headphones.

5. Sound optimization and control setting

Once connected, you should configure the Mi Airdots Pro 2 for maximum comfort.

• 🎧 Equalizer: Most players (like Spotify or Poweramp) have presets for bass or vocals. Android also has system audio settings in Settings. → Sound. → equalizer.
• 🔊 Volume: By default, the headphones limit maximum volume. To remove the restriction, go to Settings. → Sound. → Safe Volume (on Android 10)+) and disable the restriction.
• ⏮️ Gesture control: Double tap on right earphone: next track. Double tap on left: previous track. Triple tap: voice assistant call. 2 seconds hold: take/end call.

On iOS, gesture management works similarly, but calling a voice assistant (Siri) may require additional confirmation in privacy settings.

💡

If the sound in the headphones seems quiet, try turning off the "Absolute Volume" function in the Android developer settings (if it's on). To do this, go to Settings → About Phone → Assembly Number (click 7 times), then go back to Settings → System → For Developers and turn off the option Disable Absolute Volume (or "Opact Absolute Volume").

Frequent problems and their solutions

Even after a successful connection, users face typical problems.

Problem 1: Headphones are connected, but only sound is in one.

This means that the lead earpiece (usually the left earpiece) was out of sync with the lead earpiece.

• Remove both headphones from the case and wait until they synchronize (indicators should flash synchronously).
• If synchronization does not occur, reset (section 4).
• Check if the contacts in the case are not contaminated – sometimes it interferes with proper charging and synchronization.

Problem 2: Permanent connection breaks

The reasons may be different:

• 📶 Weak Bluetooth signal: make sure there are no obstacles between the smartphone and the headphones (walls, metal objects).
• 🔄 Conflict with other devices: Turn off Bluetooth on other gadgets nearby (such as a smartwatch or laptop).
• 📱 Problems with the firmware of the smartphone: update the OS to the latest version.

Problem 3: The microphone is not working during calls

This is most often due to the fact that the headphones are only connected in music playback mode (A2DP).

• Turn off and reconnect the headphones.
• On Android: go to Settings → Connections → Bluetooth, find Mi Airdots Pro 2 and click on the gear next to the name. Make sure Media Audio and Phone Calls are enabled.
• On iOS: Check that Bluetooth headphone settings allow access to the microphone.

💡

If microphone problems only occur in a particular app (like WhatsApp or Zoom), try manually selecting Mi Airdots Pro 2 as the audio input device in that app's settings.

7.How to connect Mi Airdots Pro 2 to a PC or laptop

Headphones can be used with computers on Windows or macOS. The pairing process is similar to mobile devices, but there are nuances:

For Windows 10/11:

1. Open Settings → Devices → Bluetooth and other devices.
2. Turn on Bluetooth and click "Add Device" → "Bluetooth".
3. Remove the headphones from the case and select Mi Airdots Pro 2 from the list.
4. Confirm the pairing (you may need to enter the code 0000).

For macOS:

1. Open System settings → Bluetooth.
2. Remove the headphones from the case - they should appear in the list.
3. Press "Connect."

Windows may require you to install drivers to keep the microphone running correctly. If the sound is late, try:

• Disable Bluetooth A2DP Sink in Device Manager and turn it on again.
• Use headphones in HSP/HFP mode (for calls) instead of A2DP (for music) – the latency will be less, but the sound quality is worse.

8. Care and extension tips

To make the Mi Airdots Pro 2 last longer, follow these guidelines:

• 🔋 Charging: Don't leave your headphones in a case charging for more than 24 hours - this shortens battery life.Use the original cable USB-C Avoid zero-starting headphones — charge them when the light turns red.
• 🧼 Clean: Wash your headphones and case with dry soft cloth 1-2 times a week. Use a soft brush (such as a toothbrush) to remove earwax from the speaker grid. Do not use alcohol or aggressive detergents - they can damage the coating.
• 🌡️ Exploitation: Do not use headphones in temperatures below 0°C or higher than 45°C. Avoid moisture – headphones have protection IPX4, It doesn't guarantee complete water resistance, so keep your headphones in your case when you're not using them, which protects them from dust and mechanical damage.

The average battery life in the Mi Airdots Pro 2 is 2-3 years with heavy use. If you notice that the battery life has decreased to 1-1.5 hours (at the initial 4-5), this is a signal of battery degradation.

1. Completely discharge the headphones (before turning off).
2. Charge them in the case to 100% (the indicator on the case burns green).
3. Repeat the cycle 2-3 times.

💡

If headphones are getting worse, avoid using them at high or low temperatures, which accelerates the degradation of lithium polymer batteries. Optimal range: 10-35°C

FAQ: Answers to Frequent Questions