Xiaomi Earphones 2 Basic wireless headphones have become a popular choice thanks to a combination of affordable price, compact design and stable Bluetooth connection. However, even with such a simple device, users often have questions about how to turn on the headphones, activate pairing mode or fix problems with connecting to a smartphone. This is especially relevant for owners of low-cost Xiaomi models, where there is no NFC or advanced features like fast connection via MIUI.
In this article, we will analyze not only the basic procedure for connecting to your phone on Android and iOS, but also the nuances that are not written in the official instructions. For example, why headphones might not be defined in the list of available devices, how to reset them to factory settings without a reset button, and what to do if the sound is interrupted or distorted (AAC/SBC) for optimal sound quality.
Technical specifications Xiaomi Earphones 2 Basic: what is important for the connection
Before you start pairing, it is worth familiarizing yourself with the key parameters of headphones that affect the connection process:
- 🔋 Bluetooth version: 5.0 (backward compatibility 4.2/4.0, There may be limitations on functionality).
- 🎵 Supported codecs: SBC (basic), AAC (iPhone and some Android devices).
- 🔄 Compound profile: HSP, HFP, A2DP, AVRCP — Responsible for sound transmission and call management.
- ⏱️ Operating time: up to 5 hours on one charge (in talk mode - up to 4 hours).
- 📦 Complete: no charger case – headphones are charged via Micro-USB cable (included in the kit).
Important: Earphones 2 Basic does not support multipoint (simultaneous connection to two devices) and aptX (codec for high-quality sound).If your phone offers a choice of codec in Bluetooth settings, the best option is AAC for iPhone or Android 10+, and SBC for older devices.
Preparing headphones for the first connection
Before pairing with your phone, you need to put Xiaomi Earphones 2 Basic in device search mode. Here's how to do it correctly:
- Charging headphones: Make sure the charge level is at least 30%. Connect the headphones to charge for 10-15 minutes if the indicator flashes red. Full charge takes ~1.5 hours.
- Turn on: Press the touchpad on either headphone for 3 seconds until you hear the beep and see the white and red lights blinking alternately (this means the headphones are ready to pair).
- Reset (if necessary): If the headphones have already been connected to another device, reset: press the touchpad on both headphones simultaneously for 10 seconds until the indicators flash red 3 times.
Note that unlike models with a case (e.g. Redmi AirDots), there is no automatic switching on when removed from the case. Headphones always need to be manually turned on.
Charge headphones to at least 30% |
Enable headphones with a long press of the touch panel |
Make sure the indicators flash white and red |
If necessary, reset settings (10 seconds retention on both headphones)-->
Step-by-step: how to connect to an Android smartphone
The process of pairing with an Android phone (including Xiaomi, Samsung, Realme, etc.) consists of several steps.
- Activate Bluetooth on your phone: Open Settings → Connections → Bluetooth (the path may vary depending on the firmware). Translate the slider to “On” or click “Device Search”.
- Find the headphones in the list: The list of available devices should show the name Mi Earphones 2 Basic or Mi Earphones Basic 2. If the name does not appear, update the list (update button or swipe down).
Confirm the conjugation
- Click on the headphone name in the list.
- Confirm the connection (if you request permission to access contacts/microphone, select Allow).
After successful connection, the headphones will stop flashing and turn blue (work mode). In some firmware (for example, MIUI 12+), a notification may appear that you can adjust gestures or check the charge level.
💡
If the headphones are not detectable, try turning off Bluetooth on your phone for 10 seconds, then turn it on again and re-search. This resets the Bluetooth cache.
Interface with iPhone (iOS): features and nuances
Connecting to an iPhone (iOS 12 and above) is almost the same as Android, but there are a few key points:
- Turn on Bluetooth: Go to Settings → Bluetooth. Activate the slider (should turn green).
- Wait for the headphones to arrive: The Mi Earphones 2 Basic name will appear in the "Other Devices" section. On an iPhone, it can take up to 20 seconds to detect.
Confirm the connection.
- Click on the headphone name.
- If the Not Recognized notification appears, ignore it – the sound will work.
Important: on iOS, you can't manually select a Bluetooth codec, the system automatically uses AAC, which provides better sound quality than SBC. However, some users note audio delays when watching videos. The solution is to enable Low Lag mode in the video player settings (for example, on YouTube or Netflix).
Why can't iPhones see headphones?
Common Problems and Their Solutions
Even after successful pairing, users face common errors, and we'll look at the most common ones and how to fix them:
| Problem. | Possible cause | Decision |
|---|---|---|
| Headphones are not on | Battery discharged or firmware got stuck | Connect to charge for 30 minutes. If it doesn't work, reset (10 seconds hold on both headphones) |
| The sound is interrupted or distorted | Interference from other devices or weak Bluetooth signal | Make sure there's no obstruction between the phone and the headphones. |
| Only one earpiece works. | Unsynchronized with each other | Put both earphones off for 10 seconds, then turn them on again. |
| The microphone is not working during calls. | Not selected the correct Bluetooth profile (HFP) | In Bluetooth phone settings, select Use for calls or reconnect your headphones. |
If the headphones are connected but there is no sound:
- 🔊 Check the volume level on your phone and headphones (adjusted by the touchpad).
- 📱 Make sure that the output to Mi Earphones 2 Basic is selected in the phone sound settings.
- 🔄 Restart your phone – sometimes the audio driver “hangs” after connecting a new device.
💡
If the problem persists after all the manipulations, try connecting the headphones to another device. If they work, there is a problem in the phone (possibly a faulty Bluetooth module).
Additional settings to improve sound
Once connected, you can optimize the sound and control of the headphones. Here's what you need to configure:
- 🎧 Codec Choice (for Android): In Bluetooth settings, find Mi Earphones 2 Basic → «Settings" (cogs). AAC (priority for quality; or SBC (priority).
- 🎚️ Equalizer: Use a built-in equalizer for your phone or app like Equalizer FX (Android or Boom 3D (For Earphones 2 Basic, settings with enhanced average frequencies (1-4 kHz) are recommended).
- 🔇 Noise reduction: There is no active noise cancellation in these headphones, but you can turn on Transparency Mode in the special features settings (Android 12)+).
On Xiaomi phones with MIUI, additional features are available:
- 🔄 Auto Connection: Enable the Auto Connection option in Bluetooth settings.
- 📱 Charge notifications: In some versions MIUI displays the level of charge of the headphones in the status bar.
💡
To reduce the audio delay when watching a video, turn on the “Audio Delay” option in the player and select the value manually (usually 100-200 ms).
How to reset Xiaomi Earphones 2 Basic to factory settings
If the headphones are unstable (self-disconnect, do not sync with each other or do not connect to the phone), a complete reset will help.
- Turn off the headphones (hold the touchpad on any of them for 5 seconds until the indicator goes out).
- Place both headphones on a flat surface with touch panels up.
- Press the touch panels on both headphones simultaneously for 10-15 seconds.
- Release when the indicators flash red 3 times - this is a signal of a successful reset.
- Turn on the headphones again (3-second hold) - they are ready for a new pairing.
Once reset, all previous connections will be removed and the headphones will return to the factory settings, which also helps if one of the headphones is no longer defined or the sound has become mono instead of stereo.