Xiaomi Mi Band 4 won’t turn on after reset: full recovery guide

Xiaomi Mi Band 4 is one of the most popular fitness bracelets, but even it is not immune to failures. After resetting through Settings → Reset or forced reboot, many users face a problem: the screen does not respond, there is no vibration, and the bracelet seems “dead.” In 80% of cases, the device does not break – it just needs to be properly “waked up”.

In this article, you will find step-by-step instructions for all scenarios, from basic onset via charging to recovery via Mi Fit or Zepp Life. We will also analyze common errors (for example, why the bracelet vibrates but does not turn on) and give recommendations for preventing similar situations in the future. If your Mi Band 4 turned into a brick after reset, don’t panic, there is a solution!

Why does Mi Band 4 not turn on after resetting?

Resetting your settings on Mi Band 4 can cause the device to “hang” for several reasons:

• 🔋 After reset, the bracelet spends additional energy restarting the core, and if the charge was below 10%, it may not turn on without recharging.
• 🔄 Incomplete reset: If you interrupt the process (for example, disconnect the bracelet from the phone or remove it from the charger), the firmware is damaged.
• 📱 An outdated version of Mi Fit or Zepp Life can block sync after reset.
• 🛠️ Hardware failure: Rarely, but possible damage to charging contacts or power chip (for example, after a fall or moisture hit).

According to service center statistics, 95% of the time, the problem is solved software-free, the main thing is not to try to revive the bracelet at random (for example, by repeatedly pressing a button), but to follow a clear algorithm.

⚠️ Note: If you updated your firmware through unofficial sources before reset (e.g. Mi Band 4 Tools), the bracelet may require manual flashing, in which case standard on-boarding methods will not work.

Method 1: Energizing through charging (the most reliable method)

This method works 90% of the time, as the charger initiates a hardware power reset, you will need an original cable (or certified analogue) and a power supply with a current of at least 1A.

Step-by-step:

1. Connect the bracelet to charge. Make sure the contacts are clean (wipe them with an alcohol wipe if necessary).
2. Leave the bracelet on charging for at least 30 minutes, even if the indicator is not on.The Mi Band 4 may not show signs of charging at deep discharge.
3. After 30 minutes, press and hold the touch button under the screen for 10-15 seconds.
4. If the screen doesn't catch fire, unplug the bracelet from charging, wait 10 seconds and plug it back in. Repeat the button holding.

The original cable is used.|Bracelet contacts and charging clean|The power source ≥1A|The bracelet was on the charge. ≥30 minutes.-->

If after these actions, the Mi logo or charging animation appeared on the screen, the bracelet successfully turned on. If not, proceed to the next method.

⚠️ Warning: Do not use "fast" smartphone chargers (e.g. Quick Charge 3.0) which can damage the bracelet's power controller due to unstable voltage.

Method 2: Forced reboot through a button

If the bracelet is not responding to charging, but you are sure that the battery is not discharged (for example, the reset was performed at 50% charge), try a hard reboot. This method works if the firmware is “hang” during the initialization stage.

Algorithm of action:

• 🔘 Press and hold the touch button under the screen for 20–25 seconds.
• 🔄 If the bracelet has vibrated 1 time, release the button and wait 10 seconds. Vibration means that the device is trying to reboot.
• 🔋 If there was no vibration, connect the bracelet to charging and repeat holding the button.

After a successful reboot, you will see the Mi logo or the Pair inscription (if the bracelet is reset to factory settings).If the screen remains empty but the bracelet vibrates every 5 seconds, this is a sign of damaged firmware, in which case you will need to flash it through the PC (see section below).

Through the wristband menu|Through the Mi Fit app|Through Zepp Life|I remember.|Other-->

Method 3: Recovery via Mi Fit or Zepp Life

If the bracelet is switched on but not synced to the phone, the problem may be a communication failure between devices, in which case re-association through the official app will help.

Instructions for Mi Fit:

1. Open Mi Fit and go to Profile → My Devices.
2. Click on Mi Band 4 and select Delete Device.
3. Return to the home screen and click Add Device → Bracelet → Mi Smart Band 4.
4. Follow the instructions on the screen. When you request to bring the bracelet to your phone, tap the touch button.

For Zepp Life (formerly Amazfit):

1. Launch Zepp Life and tap the + icon in the upper right corner.
2. Select Mi Band 4 from the list of devices.
3. Allow the app to access Bluetooth and geodata.
4. Wait for the code to appear on the bracelet and confirm the pairing in the application.

If the app gives an error "Device not supported", check the region of the Xiaomi account (CN-version) may not work with European servers, so the solution is to change region to China in the account settings.

💡

Before re-binding, turn off the VPN and check that the phone is geolocated. Mi Fit uses it to determine the region of the bracelet.

Method 4: Flashing through PC (for power users)

If the bracelet vibrates but doesn't turn on, or only the Mi logo is on the screen, the firmware is likely damaged, in which case manual flashing through the Mi Band 4 Tools utility (Windows PC is required) will help.

Important: This method is only suitable for Mi Band 4 with global firmware (Global or Europe). For the Chinese version (CN), other firmware files are needed.

Step-by-step:

1. Download the archive with firmware and utility at the link (checked for viruses).
2. Unpack the archive and launch MiBand4Tools.exe on behalf of the administrator.
3. Connect the bracelet to charging and connect the charging to the PC via USB-hub (not directly!).
4. In the utility, select Flash Firmware and specify the path to the firmware file (.fw).
5. Press Start and wait for the process to be completed (the bracelet vibrates and reboots).

Critical information: If a "Device not found" error appears during the firmware, disable the antivirus (it can block drivers) and try again. Do not unplug the bracelet until the process is complete!

Frequent Mistakes and How to Avoid Them

Many users make the problem worse by making common mistakes, and this is what you can't do when you try to turn on the Mi Band 4 after you reset:

• 🔌 Use non-original charges. Cheap cables can deliver unstable voltages, causing the power controller to fail.
• 🔄 Press the button multiple times, draining the battery and increasing the risk of firmware freezing.
• 📱 Install unofficial firmware without backup, which can turn the bracelet into a brick».
• 💦 Trying to disassemble the bracelet without experience.Mi Band 4 has brittle plumes that are easy to damage.

To minimize the risks in the future:

• 🔋 Regularly charge the bracelet (do not allow a discharge below 20%).
• 📲 Update your firmware only through official apps (Mi Fit or Zepp Life).
• 🔄 Before resetting, synchronize data with your phone.

💡

If the bracelet does not turn on after reset, in 99% of cases the problem is solved by a combination of methods: charging + forced reset + re-binding in the application.

FAQ: Answers to Frequent Questions