Xiaomi Amazfit smartwatches and fitness bracelets have become an integral part of the daily lives of millions of users, these devices monitor health, display notifications and even help with training. But sometimes it is necessary to turn them off completely — for example, to save charge before long-term storage, fix software failures or prepare for sale. Unlike smartphones, where the power button is always at hand, with wearable gadgets, it is not all that obvious.
In this article, we’ll look at all the ways to turn off Amazfit devices, from classic models like the Amazfit Bip to the flagship Amazfit GTR 4 and GTS 4. You’ll learn how to do this through physical buttons, touch screen, Zepp’s mobile app (formerly Mi Fit), and what to do if the gadget freezes and does not respond to commands.
1. Standard shutdown via the device menu
Most modern Amazfit smartwatches allow you to turn off via a built-in menu.This method is suitable for models with a touch screen: GTR 2/3/4, GTS 2/3/4, Amazfit T-Rex, Falcon and others. The interface may be slightly different, but the overall logic is maintained.
To turn off the device:
- Wake up the screen by pressing a physical button or double tapping on the display.
- Swipe your finger from left to right (or vice versa, depending on the model) to open the main menu.
- Find the Settings icon (cog) and tap it.
- Scroll down to System or About Device.
- Select Power Off and confirm the action.
On some devices (such as the Amazfit Bip U Pro), the path may look like: Settings → More → Turn off. If there is no explicit "Switch off" option on the menu, look for Flight Mode or Energy Saving – they often duplicate the shutdown function.
Battery charge not less than 20% (for safe switching on later)
Synchronized data with the Zepp application
All straps/accessories removed (if storage is planned)
The sequence of the switch is remembered (usually holding the 10-15 sec button)
-->
⚠️ Attention: On the Amazfit models GTR 4 and GTS 4 with the latest updates, the "Switch off" item may be hidden, in which case, use an alternative method - holding the power button (described in the next section).
2. off using a physical button
The classic method that works on most devices is holding a physical button, and this is true for models with one or two buttons: Amazfit Bip, Bip S, T-Rex 2, GTR 2 and others, and the main advantage of this method is that it works even if the touch screen is not responding.
Instructions:
- 🔘 Press and hold the main button (usually the right button) for 8-12 seconds.
- 📱 On the screen will appear menu with options: Turn off, Reboot, Flight Mode.
- 👆 Scroll to Turn Off (up/down swipe or press button).
- ✅ Confirm the choice by holding the button or tap on the screen.
On some devices (such as the Amazfit Neo), the menu will immediately start counting down to shutdown. If you release the button ahead of time, the process will stop. For models with two buttons (Amazfit T-Rex Pro), you may need to hold both at the same time.
| Model | Button combination | Retention time | Notes |
|---|---|---|---|
| Amazfit Bip / Bip S | The only button | 10 seconds. | The menu appears after the vibration. |
| Amazfit GTR 2 / GTS 2 | Right button | 8 seconds | Swipe up for confirmation |
| Amazfit T-Rex 2 | Left + right buttons | 5 seconds | It only works when the screen is unlocked. |
| Amazfit GTR 4 | Right button (double press) | 12 seconds | The last firmware required |
Amazfit Bip / Bip S
Amazfit GTR 2/3/4
Amazfit GTS 2/3/4
Amazfit T-Rex / T-Rex 2
Another model
-->
⚠️ Note: On devices with hardware faulty buttons (for example, after a fall), this method will not work. In this case, try turning off the gadget through the Zepp app or wait for the battery to completely discharge (not recommended for lithium polymer batteries).
3. Shutdown via Zepp mobile app
If the sensor or buttons don't respond, you can try turning the device off remotely via an official app, which works for all models that communicate over Bluetooth, but requires pre-synchronization.
Step-by-step:
- Open the Zepp app (formerly Mi Fit) on your smartphone.
- Go to the Profile tab (the human icon in the lower right corner).
- Select your Amazfit device from the list of connected gadgets.
- Slap the icon. ⚙️ Settings of the device.
- Scroll down to the System section or additionally.
- Find the item Turn off the device or Disable and confirm the action.
Important: not all models support remote shutdown. If there is no such item in the settings, the application can only offer factory reset or device unsetting. In this case, use the other methods from this article.
Why doesn't Zepp have a "Switch off" button?
After successfully shutting down via Zepp, wait for the vibration on the clock - this is a signal that the command is fulfilled. If the gadget does not respond, try reconnecting it to the application or restarting the smartphone.
4. Forced shutdown (if the device is getting stuck)
Sometimes, the Amazfit smartwatch will stop responding to any command: the screen is frozen, the buttons are not working, and synchronization with the phone is impossible, in which case a forced reboot or a complete power outage will help.
Methods of forced shutdown:
- 🔋 Battery discharge: Leave the device on until full discharge (may take 1-3 days) Once connected to charging, it will turn on automatically. Minus: unsafe for the battery with frequent repetitions.
- 🔌 Reset via charging: Connect the watch to the charger. Hold the power button for 15-20 seconds. Release the button when the screen blinks or the Amazfit logo appears.
- 📦 Hardware reset (extreme): Remove the back cover (if it's removable, like on the Amazfit Bip). Remove the battery for 10-15 seconds (requires skill!). Set the battery back and plug it into charging.
💡
If the screen freezes on the Amazfit logo after being forced to shut down, wait 5-10 minutes — the device can complete the boot process on its own.
⚠️ Warning: Removing the battery manually voids warranty and may cause contact damage.This method is only recommended for devices older than 3 years or in critical failures.
If none of these things worked, it might be the firmware problem, and then flashing through the firmware will help. PC-Amazfit Tools app (instructions are available on forums) 4PDA or XDA Developers).
5. Deep Sleep Mode vs Full Shutdown: What's the Difference?
Many users confuse full shutdown and deep sleep mode, which saves charge but doesn't shut down the device completely.
| Parameter | Total shutdown | Deep sleep mode |
|---|---|---|
| Energy consumption | 0% (battery not discharged) | ~1–2% per month |
| Response to notifications | No. | No (except the alarm clock) |
| Time of inclusion | 10.30 sec. | 2-5 seconds |
| Data retention | Yes (except for unsaved settings) | Yes. |
| When to use | Long-term storage, sale, repair | Short-term charge savings (night, flight) |
To activate the deep sleep mode:
- Open the device menu.
- Go to Settings. → Battery.
- Select Deep Sleep Mode.
- Set an automatic wake-up timer (optional).
On some models (Amazfit GTR 3 Pro), the mode is automatically turned on at a critical charge level (below 5%).
💡
Full shutdown is recommended only in extreme cases, and regular use of deep sleep mode prolongs the life of the battery without the risk of data loss.
6. Frequent mistakes and how to avoid them
When you turn off Amazfit devices, you often experience typical problems, and here are the most common ones and how to solve them:
- ❌ "Device does not turn off via menu": Reason: Outdated firmware or software failure. Solution: Update your device via Zepp or reset to factory settings (Settings) → System system → Reset).
- ❌ "After the clock is turned off": Reason: Complete battery discharge during storage. Solution: Connect to charging for 30-60 minutes, even if there is no reaction. Use the original cable.
- ❌ "Power button not working": Cause: Mechanical damage or moisture intrusion. Solution: Try turning it off via the app or wait for the discharge.
- ❌ "The device shuts down by itself": Cause: Battery or contacts malfunction. Solution: Check the density of the charging contacts. If the problem recurs, replace the battery.
If your device is not behaving normally, check for moisture (an indicator inside the case) or overheating (the body is hot to the touch), which often cause unstable operation.