Replacing the strap on a smartwatch is not only a way to refresh the look of a gadget, but also a necessity when an old accessory wears out or loses its aesthetic properties. Owners of Xiaomi Amazfit devices often face the desire to personalize the device by choosing a color or material for a specific case. However, the dismantling process can raise questions for beginners, especially if the mounting mechanism has its own characteristics.
In this article, we will discuss in detail how to properly and safely remove the strap from various models of Amazfit smart watches without damaging either the body or the bracelet. The correct approach to this procedure ensures that you do not scratch the glass or body during manipulations.
Before you start to take action, it is important to understand the type of attachment installed on your model. Most of the modern devices of the brand use standard mechanisms, but there are unique solutions that require special attention. Carefully examine the place of connection of the strap to the body to determine the presence of hidden locks or screws. Ignoring this step can lead to breakage of latches.
Determination of the type of strap attachment
The first step in the replacement process should always be to diagnose the type of connection. Amazfit devices are equipped with several types of fasteners, and understanding their differences is critical to the success of the task.
Some models may have a more complex design, where the strap is inserted into special slots and fixed by internal latches. In such cases, simple pulling will not help, but only create a risk of damage. It is important to know that the locking mechanism can differ even within the same line of devices, for example, between the versions of the Bip and GTR.
Also worth considering is the material from which the old strap is made: Silicone, leather and fluoroelastomer behave differently when dismantled. Hard materials may require more effort, while soft silicone is easily deformed, making it easier to access the fixing elements.
- 🔍 Pin mount: classic version with a spring-loaded rod inside the ear.
- 🔒 Clamping mechanism: the strap is fixed with plastic or metal legs.
- 📏 Insert connectors: typical for some fitness trackers with non-removable ears.
If you are not sure about the type of mount, it is better to find the official documentation or video review of your model beforehand, which will help to avoid unnecessary movements and potential damage. Remember that the case of the watch is often made of plastic or a light alloy that is easy to scratch with the careless movement of a metal tool.
Required tools for replacement
You may need a minimum set of tools to successfully dismantle the strap, and in most cases, your fingers and a little patience are enough, but for some Xiaomi Amazfit models, it is better to prepare additional inventory, which will speed up the process and reduce the risk of slipping your hands.
The main tool is often a thin screwdriver or a special spatula to open the electronics, and it is also useful to have a soft cloth or mat on which you put the watch, which will prevent scratches on the screen or the back during the work.
☑️ Preparation for the belt replacement
Using inappropriate items, such as a knife or a thick needle, can damage the mechanism. It is best to purchase a special set for replacing straps, which is often sold along with new bracelets. Such sets usually include convenient levers for working with pins.
- 🛠️ Thin flat screwdriver: ideal for pin pins.
- 🧷 Tweezers: will help to pull the freed fixture.
- 🧤 Fabric wipe: protect the body from scratches and fingers from slipping.
⚠️ Warning: Never use excessive force if the strap fails.This is a sure sign that you have not found the right method of influencing the hold.
Step-by-step: classic pin fixture
The most common type of attachment in the Amazfit line is a spring pin, and to remove this strap, you need to find a small gap between the watch body and the eye of the bracelet, and that's where you need to insert a spring compression tool.
Take a thin screwdriver or a special tool and carefully insert it into the gap, and your goal is to press the movable end of the pin towards the center to release it from the seat, while holding the strap with the second hand or finger of the other hand so that it does not fly out sharply.
Once the pin comes in, pull the strap slightly to the side. If done correctly, it will easily detach. Repeat the procedure for the other side. It is important to do this over the soft surface, because the spring mechanism can fly out and get lost.
What if the pin is rusted?
When you install a new strap, you should do the reverse, first insert one end of the pin into the hole, then press the spring and wind the other end, and make sure that the pin is flat and does not protrude beyond the body, otherwise it will be uncomfortable to wear the watch.
Features of dismantling on different models of Amazfit
Different Xiaomi watches can have their own design features, such as the Amazfit Bip series, which often uses standard 20-mm straps that are easily changed, while the GTR or GTS series models may have integrated mounts or hidden locks.
Sports models such as the Amazfit T-Rex are more powerful and wide-ranging straps, often reinforced by more confident but controlled pressing, and in some cases, manufacturers add additional stoppers for reliability.
Below is a table that helps determine the features of the mounting for popular models:
| Model of the device | Type of attachment | Strap width | Nuances withdrawals |
|---|---|---|---|
| Amazfit Bip | Classic pin | 20 mm | Standard dismantling |
| Amazfit GTS | Hidden fixator | Specific | Access to the button from the bottom is required. |
| Amazfit T-Rex | Reinforced pin | 22 mm | You need a strong push. |
| Amazfit Band | Removable module | N/D | Tracker is squeezed out |
If your model is not listed in the table, it is recommended to look for information by specific item of the device. Often the same externally different watches of different years of release may have different mechanisms for mounting straps.
Replacement of the strap on Amazfit fitness bracelets
The setting with fitness bracelets like the Amazfit Band is very different from the classic watch, where most often the strap is removed, but the central module (tracker) is removed, which is then inserted into the new base, which is done to protect the electronics when washing or replacing the accessory.
To remove the module, you have to flip the bracelet back, and on a silicone basis, you'll see a notch or a special guide, and if you press the module in the direction you want, you push it out of the silicone frame, and you have to act confidently, but without jerking.
Once the tracker is removed, the new strap is assembled in reverse order, the module is inserted into the frame of the new bracelet before the characteristic click. Make sure that the pulse sensors on the back are not covered by the strap material and look outward.
💡
When you install the module in the new strap, first insert the side with the charging contacts, and then snap the rest of the part. This will ensure the correct positioning.
If you notice that the tracker starts to fall out of the old strap, it's a signal to replace it.Using a damaged bracelet can lead to the loss of an expensive gadget.
Care for new straps and prevention
After successfully replacing the strap, it is worth considering extending its lifespan. The materials used in Xiaomi Amazfit accessories require proper care. Silicone and fluorelastomer are easy to wash with soap and water, which is especially important after training.
Leather straps should not be wet. Use special skin products or slightly moist cloth to clean them. Regular cleaning prevents the accumulation of dirt and bacteria that can irritate the skin of the wrist.
⚠️ Warning: Avoid putting aggressive chemicals, alcohol or solvents on the strap, which can break the structure of the material and cause cracks or stickiness.
It is also recommended to periodically check the condition of the fixing elements, if you notice that the pin begins to stagger or the spring weakens, it is better to replace it immediately, loss of the strap during movement is an unpleasant scenario that is easy to avoid.
💡
Regular check of the integrity of the fasteners and cleaning the strap prolong the life of the accessory and ensure the safety of wearing the device.
Compliance with simple rules of operation will allow your smart device to look like new even after a long time. Properly selected and installed strap is the key to comfort and style.