The Xiaomi Amazfit Bip has been the benchmark for autonomy and functionality in the low-end wearables segment for several years. Its ability to last up to 45 days without recharging attracts users, but the first obstacle is often the initial setup process. Many owners face difficulties when trying to sync the gadget with a smartphone, not understanding why the device is not visible in the standard Bluetooth menu.
To successfully integrate a watch into your digital ecosystem, it’s not enough to simply include it. A key element here is specialized software that acts as a bridge between your fitness tracker and your smartphone’s operating system. Without installing the right app, make full use of features such as notifications, GPS-Sleep tracking and analysis becomes impossible.
In this guide, we will take a look at all the steps of connecting, from preparing gadgets to solving specific pairing errors, learn how to properly configure notifications for Android and iOS to keep important calls from missing, and how to avoid the typical mistakes that beginners make when they first activate a device.
Preparation of devices for the first pairing
Before you go to software setup, you need to make sure that both devices are physically ready. Charge Xiaomi Amazfit Bip at least to 20-30%, as the process of initial synchronization and updating the firmware can require significant energy resources. Low battery power can interrupt the installation of critical updates, which will lead to unstable operation.
Turn on the watch by holding a single physical button on the case before the Amazfit logo appears. QR-If the interface language is different from Russian, don't worry, because when you connect to the app, you can change the language to the usual one. Also make sure that your smartphone has Bluetooth and geolocation enabled (GPS), Since in modern versions of Android and iOS it is a mandatory requirement for finding peripherals.
💡
Turn on geolocation (GPS) on your smartphone before searching for a watch. Without this permission, Android can block scanning of Bluetooth devices in the background.
It is important to understand that trying to connect the watch directly through the system settings of the Bluetooth smartphone is a mistake. Direct pairing through the Bluetooth menu of the phone will not allow you to transmit health data and notifications. The watch must be “captured” through a proprietary application, which then creates the necessary communication.
Installation and configuration of the Zepp application
The main tool for managing the watch is the Zepp app (formerly known as Mi Fit), which is through this software package, you can register the device, synchronize data and deep customize the interface. You can download the application from official stores: Google Play for Android or the App Store for iPhone. Make sure you download the original application from the manufacturer Huami.
Once installed, start Zepp and create an account or log in through an existing Xiaomi, Google or Facebook profile. Registration is mandatory, as all your activity data is stored in the cloud and linked to your personal account. During the registration process, specify the correct data: date of birth, height and weight, since these parameters depend on the accuracy of calorie calculations and steps.
The app interface may seem overloaded to the beginner, but the basic features are on the home screen. At the bottom of the screen is the navigation bar where we are interested in the Profile tab. This is where the "Add Device" section begins the process of finding the watch. The app will request permissions to access notifications, contacts and location — all of which must be allowed to work properly.
The process of connecting the clock to the smartphone
When the app is running and you are authorized, go to the add-on menu. Select the "Clock" category and find the Amazfit Bip model in the list. QR-code displayed on the watch screen, or find the device automatically. Scanning the code is the most reliable method to ensure that you are connected to your gadget, especially if there are other users nearby.
Once you scan the code or select a device from the list, you will start pairing. The watch will request confirmation of communication, you must click on the confirmation button (usually the bottom button or touch the screen, depending on the firmware version), at which point the system window for requesting a pairing code may also appear on the smartphone - make sure that the codes on both screens match, and confirm the action.
☑️ Checklist of successful connection
During the initial connection, the watch can automatically update the firmware, which is a normal situation, taking 5 to 15 minutes, and the watch screen can go out or show progress bar.
⚠️ Note: Do not disable Bluetooth or log out of the app during a firmware update, otherwise the device may become unavailable.
Setup of notifications and notifications of applications
One of the main features of the Xiaomi Amazfit Bip is the ability to receive notifications from messengers and social networks. To come to your wrist, you need to manually activate them in the Zepp app. Go to the profile of your watch, select "Application Notifications" (or "Notifications") and turn on switches in front of the desired programs: WhatsApp, Telegram, Viber and others.
It is critical for Android users to give Zepp access to read notifications. The system can warn multiple times about potential data security, which is standard. Without this permission, the watch will not be physically able to read the incoming message and display its text. It is also recommended to turn on the display of calls to be able to reset the incoming call directly from the clock.
iPhone (iOS) owners should be aware of some limitations of the system: Notifications on the watch only appear if they are displayed in the smartphone notification center and were not read on the phone itself. If you opened a message in an app on the iPhone, it will not pop up on the watch. This is a feature of the iOS architecture, not a defect of the watch.
Why aren't the notifications coming?
Synchronization of data and work with sensors
Once successfully connected, active data collection begins. The Amazfit Bip is equipped with an optical pulse sensor, an accelerator and a GPS module (in some versions). The pulsemeter needs a tight strap to the wrist to function properly. Heart rate data can be collected continuously or on request, depending on the settings in the health monitoring section.
GPS-Tracking in the Bip model works on Connected technology GPS. This means that the watch itself does not have a built-in satellite navigation module, but rather uses the same system. GPS-So to record a jog or a bike, the phone must always be right next to you, and the Zepp app is running. The accuracy of the track depends on the quality of the signal your phone receives.
Synchronize the accumulated data automatically when you open an application. If you want to force this process, pull the main screen of the application down for an update. The table below shows the main parameters that sync between the device and the cloud:
| Parameter | Description | Frequency of update |
|---|---|---|
| Steps and distance | Accelerator data on the path travelled | When an application is opened |
| Pulse. | BPM measurements (blows per minute) | In synchronization |
| Son | Deep and REM sleep phases | The morning after waking up |
| Weather | Weather forecast on the clock display | Automatically every 30 minutes |
Solving Connection Problems and Errors
Despite the simplicity of the procedure, users may encounter difficulties. One of the most common problems is that the watch is visible in Bluetooth, but the application does not find it, in which case you need to remove the device from the Bluetooth system list of the smartphone ("Forget the device") and restart both gadgets. After rebooting, repeat the search procedure inside the Zepp application.
Another common situation is a constant disconnection of communication, often due to aggressive energy saving policies in Android shells (e.g. MIUI, EMUI), you need to go to the battery settings of the phone, find the Zepp application and prevent the system from closing it or limiting background activity, and it also helps to enable auto-run for the application.
💡
90% of connection problems are solved by completely removing the device from the phone’s Bluetooth list and clearing the Zepp app’s cache.
If the watch is no longer responsive to presses or is stuck on the logo, perform a forced reboot. To do this, press the power button for 15-20 seconds before the vibration and the logo appears. In extreme cases, the Zepp app can reset the clock to the factory settings, which will delete all data from the device, but return it to work.