Reset Xiaomi AirDots to factory settings: a complete guide with photos and videos

Xiaomi AirDots wireless headphones (including the Pro, Pro 2, 3, SE and others) sometimes require a complete factory reset.This may be needed when connecting to a new device, troubleshooting a sound problem, breaking a connection, or after a failed firmware update. The reset procedure takes less than 5 minutes, but has nuances depending on the headphone version and type of problem.

In this article, you will find step-by-step instructions for all popular AirDots models, including visual cues and solutions to common bugs. We will also look at when a reset is really necessary and when a problem can be solved more easily without losing settings. If your headphones stop connecting, give out a device not found error or malfunction, this guide will help bring them back to life.

When you need to reset Xiaomi AirDots to factory settings

Resetting is not a universal solution for all problems, but in some cases it is the only way to get the headphones back on track.

• 🔄 Headphones do not connect to a phone or PC, despite the enabled Bluetooth and visibility of the device in the list.
• 🎧 One of the headphones (left or right) does not work, does not synchronize with the pair or makes extraneous sounds.
• 🔋 After updating the firmware appeared lags, sound breaks or headphones quickly discharged.
• 📱 You transfer the headphones to another user and want to remove all stored devices from memory.
• ⚙️ Bluetooth settings display an error “Unable to connect” or “Device is busy».

If the problem is hardware (such as a physical breakdown of the speaker or battery), resetting will not help.

Preparation for resetting: what to do in advance

Before resetting, follow a few simple steps to avoid typical errors:

1. Check the charge of the headphones and the case, make sure that the charge level of both the headphones and the case is above 30%, and at low charge, the reset can be interrupted, which will lead to a complete loss of communication with the device.
2. Remove the headphones from the list of Bluetooth devices on all previously connected gadgets (smartphone, laptop, tablet), this will prevent conflicts when reconnecting.
3. Prepare an alternative audio device (e.g. wired headphones) as AirDots will have to be reconfigured after resetting.

If you are dropping your headphones because of sound problems, check in advance if they are related to the player's uniformity settings (EQ) or system settings of sound. For example, Mi Music or Spotify may have sound-distorting effects.

💡

If the headphones don't respond to button presses, try clearing the contacts on the case and headphones with a dry cotton swab, often solving the problem without resetting.

Step-by-step: how to reset Xiaomi AirDots (all models)

The reset process for most AirDots models is similar, but there are differences in button and retention time combinations, and below is a universal algorithm suitable for AirDots Basic, Pro, Pro 2, 3, SE and their clones.

Method 1: Standard reset via a button on the case

1. Place both headphones in the charging case and close the lid.
2. Wait 10-15 seconds until the headphones go out (meaning they are completely off).
3. Open the case cover and hold the button on the back for 20-30 seconds.
4. The indicators on the headphones will start flashing red and white – this is a signal of a successful reset.
5. Close the case cover, then open it again and reconnect via Bluetooth.

Make sure the headphones are charged |Remove the device from Bluetooth on all gadgets |Elecate the contacts of the case and headphones |Prepare alternative headphones for the time of setting-->

Method 2: Reset via touch buttons on headphones (for AirDots 3/Pro 2)

For touch-controlled models (such as AirDots 3 or Pro 2), the procedure is different:

1. Get both earphones out of the case.
2. Press and hold the touchpads on both headphones simultaneously for 10 seconds.
3. The indicators will start flashing red, then white - this is a confirmation of the reset.
4. Place the headphones back in the case, close the lid and wait 30 seconds.
5. Open the lid and reconnect the headphones.

If the lights don’t flash or flash on just one headphone, repeat the procedure by holding the buttons longer (up to 15 seconds).

Table: Reset combinations for different Xiaomi AirDots models

If your model is not in the table, use the universal method: hold the button on the case for 30 seconds until the color changes of the indicators. 90% of the time this works even for little-known modifications.

Typical Resetting Mistakes and How to Avoid Them

Many users experience problems due to improper actions during reset, and here are the most common errors and solutions:

• ❌ Not enough time to hold the button. If you release the button early, you won't reset. Hold it until the color of the indicators changes.
• ❌ Different levels of headphone charge. If one earphone is discharged and the other is charged, the sync after reset may not work%+.
• ❌ Use a non-original case, cheap analogues may not transmit a reset signal. Always use your native charge case.
• ❌ Attempt to reset while connecting to Bluetooth.Previously remove the headphones from the list of devices on all gadgets.

💡

If the headphones don’t connect after reset, try resetting Bluetooth settings on your phone (in the Settings menu → System → Reset → Network settings reset).

⚠️ Warning: If one of the headphones stops turning on or blinking after reset, don't try to disassemble it yourself.This could be a sign of damage to the power controller and professional repair is required.

What to do after resetting: setting up and connecting

After a successful reset, Xiaomi AirDots headphones will return to factory status, and now they need to be reconnected to the device:

1. Open the case cover and make sure the headphones flash white (pairing mode).
2. On your phone, turn on Bluetooth and find a device called “Mi True Wireless” or “AirDots” (the name depends on the model).
3. Confirm the connection if required. PIN-Enter 0000 or 1234.
4. After connecting, check the synchronization of the headphones: the sound must be played in both at the same time.

If the headphones are connected, but the sound is only in one, do the following:

1. Place both headphones in the case and close the lid.
2. Take them out and wait for automatic synchronization (the indicators should flash synchronously).
3. If synchronization does not occur, repeat the reset again.

For models that support Mi AI Assistant (such as AirDots 3 Pro) after reset, you may need to reset the voice assistant via the Mi Home app.

Alternative ways to solve problems without resetting

Resetting is not always the best solution. In some cases, the problem can be solved more easily:

• 🔄 Reset the headphones: Put them in a case, close the lid for 30 seconds, then pull out. This often helps with temporary failures.
• 📱 Firmware Update: Check for updates through the Mi Home app (Device Profile section) → Update of the PO).
• 🔋 Battery calibration: completely discharge the headphones, then charge to 100% without interruptions.
• 🎛️ Resetting Bluetooth settings on your phone: sometimes the problem lies in the smartphone itself, not in the headphones.

If the headphones start to work poorly after falling or getting moisture, a reset is unlikely to help.In such cases, contact the Xiaomi service center or check the warranty (for models under 1 year old).

⚠️ Warning: Once reset, all custom settings (such as customizing controls in Mi Home) will be lost. If you change gestures or sound uniformity, they will have to be reconfigured.

FAQ: Frequent questions about Xiaomi AirDots reset