Xiaomi Air 2 SE: instruction for use from connection to fine tuning

Xiaomi Air 2 SE — These are wireless headphones. TWS, They combine sound, convenience and affordable price, and have become popular with users thanks to long battery life (up to 20 hours with a case), Bluetooth 5.0 support, and noise reduction during conversations. However, even with such a simple device, beginners often have questions: how to properly connect headphones to the phone, how to control gesture playback, what to do if one earphone does not work, or how to reset the settings to factory.

In this guide, we will analyze Xiaomi Air 2 SE From A to Z: from the first turn on to hidden features that the manufacturer does not always advertise, you will learn how to make the most of these headphones from Android, iOS or even PC, and get practical tips for fixing typical problems. If you have just unpacked the box or have been using the device for a long time, but want to unleash its potential – this article is for you.

Completement and first incorporation

Before using, check what is in the box with Xiaomi Air 2 SE all the necessary components:

• 🎧 Two wireless headphones (left and right)
• 📦 Charging case with charge level indicator
• 🔌 Cable USB Type-C for case charging
• 📄 Short instructions (usually in several languages, including Russian)
• 🔄 Additional silicone embushures (sizes) S/M/L)

If something is missing, go to the store where you bought the device, or check if there are any components left in the package (sometimes the earbuds are hidden under the headphone tray).

To turn on Xiaomi Air 2 SE first:

1. Take both headphones out of the case - they will automatically turn on and go into pairing mode (indicators will start flashing white and red).
2. On your smartphone, turn on Bluetooth and find Mi True Wireless Earphones Basic 2 SE (or).
3. Confirm the connection. Once you pair the headphones successfully, the lights on the headphones will light up blue.

⚠️ Warning: If the headphones are not turned on when you are extracting from the case, check the charge level of the case (indicator on the front panel.

2. Managing gestures and buttons

Xiaomi Air 2 SE It supports touch control, all commands are done by touching the headphone body, which is convenient, but it's addictive, especially if you've used headphones with physical buttons before:

The default gestures are the same for the left and right earphone, but in the Mi Home app (which will be discussed later), you can reassign some commands, such as as assigning a double tap to skip the track instead of controlling calls.

An important caveat: sensors only respond to short, clear touches, if you press or swipe too hard, the command may not work, and avoid accidental touch when you put on your headphones, which can lead to an unexpected pause or miss track.

Double-check connection of headphones to the phone|Make sure that gestures are included in the settings|Check the cleanliness of touch panels (mud can block touches)|Update the headphone firmware (if available)-->

3. Connecting to different devices

Xiaomi Air 2 SE Not only are they compatible with Xiaomi smartphones, but they are compatible with any device that supports Bluetooth 4.2 or higher.

📱 Android (including Android) Xiaomi/Redmi/POCO)

On Xiaomi devices, the headphones are automatically connected when you first extract from the case — just confirm the pairing in the pop-up window. On other Android smartphones:

1. Open Settings → Bluetooth.
2. Click on "Search for Devices" and select Mi True Wireless Earphones Basic 2 SE.
3. Confirm the connection. Enter if necessary. PIN-code (usually 0000 or 1234, but Xiaomi does not require it).

🍎 iPhone (iOS)

On the iPhone, the algorithm is similar, but there is one feature: once connected, the headphones can be defined as “Another device” instead of “Hearbuds.” This does not affect functionality, but can limit access to certain features (for example, automatic switching between devices in iCloud).

💻 PC (Windows/macOS/Linux)

To connect to a computer:

1. Turn on Bluetooth on your PC.
2. Remove the headphones from the case and wait for the flashing indicators.
3. Select Mi True Wireless Earphones Basic 2 from the Bluetooth menu SE and plug in.

Windows. 10/11 You may need to install the Bluetooth Audio driver** manually through Device Manager.

⚠️ Attention: when connecting to macOS, there is sometimes a problem with one-way sound (only one earpiece works).Solution: turn off the headphones, forget the device in the Bluetooth settings, and then reconnect.

4. Set up via the Mi Home app

The official Mi Home app (available for Android and iOS) lets you fine-tune Xiaomi Air 2 SE: Change gestures, update firmware or check the charge level. Download it from the App Store or Google Play (caution with clones - only use the official app from Xiaomi).

After installation:

1. Open Mi Home and sign up (or sign in via your Xiaomi account).
2. Click "Add device»** (+ top-right).
3. Select the category Audio**, then Mi True Wireless Earphones Basic 2 SE.
4. Follow the instructions on the screen for pairing.

In the headphone menu you will find the following options:

• 🔄 Reassignment of gestures: you can change actions for single / double / triple touch.
• 🔋 Charge check: displays the battery level of each earphone and case in percentage.
• 🔄 Update firmware: if a new version is available, the application will prompt you to install it.
• 🎧 “For Games” mode**: reduces sound latency (useful for mobile gaming).

Important: Once the firmware update is made via Mi Home, the headphones can automatically reset the gesture settings to factory. Check them after the procedure.

1. Remove them from the list of Bluetooth devices on the phone.

2. Reset the headphone settings (hold the button on the case for 10 seconds until the indicator flashes red 3 times).

3. Repeat the pairing.-->

5. Problems and solutions

Even with reliable devices like Xiaomi Air 2 SE Sometimes there's failure. Here are the most common problems and how to fix them:

🔊 One earpiece is down.

The reasons may be different:

• 🔋 Battery discharged: put both headphones in the case for 10-15 minutes, then remove.
• 🔄 Synchronization failure: reset the settings (button on case 10 seconds) and connect again.
• 🧹 Contamination of contacts: wipe the metal contacts in the case and on headphones with a cotton swab soaked in alcohol.
• 🎧 Damage to the speaker: if there is no sound even after reset, contact the service.

🎵 Intermittent sound or interference

This is most often related to:

• 📶 Weak Bluetooth signal: bring the phone closer to the headphones (maximum distance - 10 meters without obstacles).
• 🔄 Conflict with other devices: disable other Bluetooth gadgets (fitness bracelets, speakers).
• 📱 Power Saving on Phone: Turn off Battery Optimization for Mi Home in Android Settings.

🔋 Fast battery discharge

If the headphones discharge in 1-2 hours instead of the stated 5:

• 🔄 Check if the “For Games” mode is on all the time** (it increases power consumption).
• 📴 Make sure the headphones don’t stay connected to the device in the background (turn off Bluetooth when not using them).
• 🔋 Replace the earpieces: If they fit too tightly, it can lead to overheating and accelerated discharge.

1. Put both earphones in the case.

2 Hold the button on the case for 10-15 seconds until the indicator flashes red 3 times.

3. Connect the headphones again as a new device.-->

6. Resetting settings and firmware update

If the headphones start to work unstable (for example, spontaneously turn off, do not respond to gestures or do not sync with each other), resetting to factory settings will help. This will remove all user settings, including tied gestures and connection history.

To reset Xiaomi Air 2 SE:

1. Put both headphones in the charging case and close the lid.
2. Hold the button on the front panel of the case for 10-15 seconds until the indicator flashes red 3 times.
3. Open the case cover - the headphones will automatically go into pairing mode (the indicators will flash white and red).
4. Connect them to your phone as a new device.

After reset, it is recommended to update the firmware through the Mi Home app:

1. Open Mi Home and go to the headphone menu.
2. If an update is available, a “New Firmware” notification will appear**.
3. Click Update** and wait for the process to complete (don’t remove the headphones from the case!).

⚠️ Warning: Do not interrupt the firmware update process. If the indicator on the case flashes green, this means that the data is being transmitted - removing the headphones or turning off Bluetooth at this stage may lead to the loss of the device's functionality.

7. Care and storage tips

To Xiaomi Air 2 SE Have served longer, follow simple recommendations:

• 🚿 Avoid moisture: Despite the stated protection from sweat (IPX4), Do not use headphones in the rain or in the shower.
• 🔥 Do not leave it in the sun: overheating can damage the battery (optimal storage temperature is 10-35).°C).
• 🧼 Clean regularly: Remove earwax from earbuds with soft cloth soaked in soapy solution (do not use alcohol for silicone!).
• 🔋 Keep in case: even if the headphones are discharged, the case protects them from dust and mechanical damage.
• 📵 Turn off Bluetooth when not using: this will prolong the life of the battery of headphones and case.

If you don’t plan on using your headphones for long periods (like vacation time), discharge them to 50% and store them in a cool dry place. Full discharge or, conversely, 100% charge for a long time shortens the life of lithium polymer batteries.

💡

If the earpieces have lost elasticity or started to fall, they can be replaced by third-party ones (for example, from Sony or Samsung of the appropriate size), the main thing is that they fit tightly on the headphone body.

8 Hidden functions and life hacks

Xiaomi Air 2 SE There are several non-obvious features that the manufacturer is silent about:

• 🎮 Low Latency Mode: Enable it in Mi Home for games (sound latency is reduced with the ~200 ms to ~100 ms).
• 🔊 Mono mode: You can only use one headphone (e.g., right earpiece) while the other is in the case.
• 📱 Autoconnection: If the headphones were paired with the phone before, they will connect automatically when removed from the case (if Bluetooth on the phone is turned on).
• 🔋 Fast charging: 10 minutes in a case gives up to 1.5 hours of playback.
• 🎧 Equalizer settings: in some firmware MIUI (on Xiaomi smartphones, you can adjust the sound of headphones through Settings → Sound. → equalizer.

Another useful life hack: if you lose one headphone, you can buy a left or right module separately (they are sold as spare parts) and pair it with the rest.

1. Reset the settings of the surviving headphone (hold the button on the case for 10 seconds).
2. Put the new headphone in the case and wait for the synchronization (the indicators should flash blue).
3. Connect the headphones to the phone again.

Note: this method works only if the new headphone of the same model and firmware version.

Frequently Asked Questions (FAQ)