Xiaomi Air 2 Pro: how to connect to a smartphone, computer and other devices

Xiaomi Air 2 Pro are wireless headphones with Bluetooth 5.0 support, active noise cancellation and up to 25 hours of work, but even with such an advanced device, users often have questions about how to pair headphones with a phone, why they do not connect to a PC, or how to reset if the connection is lost. This article provides step-by-step instructions for all scenarios, including rare cases that are not described in the official documentation.

We will analyze not only the basic connection to Android and iPhone, but also the nuances of working with Windows. 10/11, And we'll focus on common mistakes, like why the headphones only connect to one device, how to fix the intermittent sound, and what to do if the light flashes white but the connection doesn't work. 2 Pro and faced with a problem - most likely, its solution is below.

1. Preparation of headphones for the first connection

Before pairing with any Xiaomi Air 2 Pro device, you need to take the device out of sleep and activate the search mode.

• 🔋 Charge your headphones: even if the indicator shows a charge, connect the case to the network for 10-15 minutes.
• 🎧 Remove the headphones from the case: they will automatically turn on. Wait until the indicators on both earphones start flashing white and red (this means that they are ready to connect).
• 🔄 Reset to factory settings (if the headphones have already connected to other devices): press the button on the case for 10 seconds until the indicator flashes red 3 times.

If the headphones don't flash or only burn on one headphone, the problem could be a dead battery or a software failure. Try to put the headphones back in the case, close it for 30 seconds, and then repeat the extraction. 90% of the time, it helps.

⚠️ Warning: Do not press the reset button on the case for longer than 15 seconds - this can cause a firmware failure.If the indicator after the reset does not respond at all, connect the case to charge for 1 hour.

2. Connect to a smartphone (Android and iOS)

The process of pairing with Android and iPhone is similar, but there are key differences in settings. Let's look at both.

2.1. Android interface (MIUI, Samsung, Pixel, etc.)

On devices running Android 8.0+ The connection is automatically via the Bluetooth menu:

1. Open Settings → Connections → Bluetooth.
2. Make sure Bluetooth is on.
3. In the list of available devices, find Mi True Wireless Earphones 2 Pro (or Xiaomi Air 2 Pro) and tap it.
4. Confirm the pairing if a request appears.

On smartphones Xiaomi with MIUI 12+ After the connection, a notification will appear about the possibility of installing the proprietary application Mi Earphones (formerly Mi Home:

• 🎛️ Customization of gestures (double touch, retention).
• 🔊 Level adjustment ANC (noise-canceling).
• 📊 View the charge level of the case and headphones.

2.2. iPhone pairing (iOS 14 and later)

On the iPhone, the process is almost identical, but there is a nuance: Xiaomi Air 2 Pro does not support Apple's W1/H1 chip, so some features (such as automatic switching between Apple devices) will not work:

1. Go to Settings → Bluetooth.
2. Wait until Mi True Wireless appears on the list.
3. Slip on the device and wait for the inscription "Connected".

If the headphones are connected but the sound is interrupted or heard in only one headphone, try:

• 🔄 Disconnect and reconnect the headphones.
• 📱 Forget the device in Bluetooth settings and repeat pairing.
• 🔋 Reboot your iPhone (sometimes helps in conflicts with other Bluetooth devices).

⚠️ Note: The status bar headphone charge indicator may not work on iOS. Use the Battery Widget to check the battery (add it via home screen editing).

3. Connection to a computer (Windows and macOS)

PC interfaces are often difficult due to drivers or conflicts with other Bluetooth devices, and we'll look at both.

3.1. Windows 10/11: step-by-step

On Windows, make sure before connecting that:

• 🖥️ Bluetooth adapter supports Bluetooth 4.2+ (Check in Device Manager).
• 🔄 Drivers updated (download from the manufacturer's laptop or adapter website).

Next:

1. Press Win + I, select Devices → Bluetooth and other devices.
2. Turn on Bluetooth and click "Add device" → Bluetooth.
3. Select Mi True Wireless Earphones 2 Pro.
4. If you have a request to enter the code, leave the field empty and click "Connect".

If the headphones are connected, but the sound is only through one earpiece:

1. Open the control panel. → Sound.
2. Find Mi True Wireless..., right-click and select “Use by default”.
3. Go to the "Space Sound" tab and turn off all effects.

3.2. macOS: features of the connection

On a MacBook or iMac, the process is easier, but you may need to manually adjust your audio profile:

1. Open System settings → Bluetooth.
2. Click "Connect" next to Mi True Wireless.
3. After connecting, open System settings → Sound. → Exit.
4. Select Mi True Wireless Earphones 2 Pro as the output device.

If the sound is interrupted or interference is heard:

• 🔊 Turn off the Automatic Sound Switch function in Bluetooth settings.
• 📡 Move closer to your computer (maximum distance for stable connection is 5 meters).
• 🔄 Reboot your Mac with connected headphones.

4. Connect to a TV, console or other device

Xiaomi Air 2 Pro can be connected not only to smartphones and PCs, but also to Smart TV, PlayStation, Nintendo Switch and even some fitness trackers, but there are limitations:

• 📺 TVs: Most of Samsung's, LG Sony supports Bluetooth, but may require manual input PIN-code (usually 0000 or 1234).
• 🎮 Game consoles: PS4/PS5: Supported, but with delayed sound ~100 MS Nintendo Switch: External Bluetooth adapter required (built-in module doesn't work with headphones) Xbox: Not officially Bluetooth audio (Xbox Wireless adapter needed).

To connect to Smart TV:

1. Open the Settings. → Sound. → Sound output → Bluetooth devices.
2. Select Mi True Wireless Earphones 2 Pro.
3. If the TV asks PIN, enter 0000.

⚠️ Attention: On Android TV (For example, Xiaomi Mi TV) You may need to disable “Auto-Connection to the Last Device” in Bluetooth settings, otherwise the headphones will spontaneously connect to the phone.

💡

If the TV can’t see the headphones, try connecting them to your phone and then turning on the Bluetooth Sound Transfer mode on your phone (for example, on Samsung this is a Dual Audio feature).

5. Solving common connection problems

Even with the right pairing Xiaomi Air 2 Pros can work in an unstable way.-5 problems and solutions:

5.1 Headphones do not turn on or respond to buttons

If the indicators are not on:

• 🔌 Connect the case to charge for 30 minutes (even if the case indicator is on fire).
• 🧲 Check if metal objects stick to headphone contacts (coins, keys).
• 🔄 Reset the settings (press the button on the case for 10 seconds).

5.2. The sound is interrupted or interference is heard

Causes and solutions:

• 📶 Wi-Fi interference: Switch your router to a 5GHz channel or turn off Wi-Fi while you listen.
• 🔋 Low charge: Charge your headphones to 100% (at levels below 20%, there may be failures).
• 🎵 Bluetooth Codecs: On Android in Developer Settings (Settings) → The phone. → Build number, tap 7 times) select Bluetooth Audio Codec → AAC.

The headphones are connected to only one device.

Xiaomi Air 2 Pro does not support multipoint (simultaneous connection to two devices).

1. Turn off the headphones from the first device manually.
2. Connect to the second device via the Bluetooth menu.

5.4 The microphone is not working on calls

If the interviewer does not hear you:

• 📱 On Android: In Bluetooth settings, select "Use for calls".
• 🍎 On iPhone: Go to Settings → Bluetooth → i (near the headphones) → Microphone → Always.
• 🔊 On Windows: In the Control Panel → Install Mi True Wireless as the default communication device.

5.5 Headphones discharge quickly

If the work time is less than the stated 25 hours:

• 🔋 Turn it off. ANC (Active noise reduction in the Mi Earphones app.
• 📴 Reduce the volume (at maximum, the headphones discharge 2 times faster).
• 🔄 Update the firmware through the Mi Home app (if available).

💡

If your headphones start to run out quickly after you update your firmware, try resetting them to factory settings, which restores normal running time in 30 percent of cases.

6. Update firmware and reset settings

If the Xiaomi Air 2 Pro is not working properly, the reason may be outdated firmware, which can be updated through the official Mi Home app (Android only):

1. Install Mi Home from Google Play.
2. Put the headphones on the phone.
3. Open the app, find Mi True Wireless Earphones 2 Pro in the list of devices.
4. If an update is available, a “Update firmware” notification will appear.

For a complete reset (if the headphones are glitchy or not connected):

1. Put both headphones in the case and close the lid.
2. Press the button on the case for 10 seconds until the indicator flashes red 3 times.
3. Open the lid and wait until the headphones start flashing white and red.

⚠️ Warning: Do not interrupt the firmware update process! If the indicator on the case flashes orange, wait until it is completed (usually 2-5 minutes.

7. Alternative ways of connecting

If Bluetooth connectivity is not possible (e.g. on older devices), you can use an audio cable or Bluetooth transmitter.

Connection via 3.5 mm audio cable

Xiaomi Air 2 Pro does not have a 3.5 mm connector, but you can use:

• 🎧 Bluetooth adapter (for example, Xiaomi Bluetooth Audio Receiver), which connects to the headphones via Bluetooth, and to the sound source through 3.5 mm or USB-C.
• 🔊 FM-Car transmitter (if you need to connect to a radio without Bluetooth).

7.2. use of two devices at the same time (bypassing restrictions)

While the Air 2 Pro does not support multipoint, you can emulate this through:

• 📱 SoundAssistant (Samsung) app: Allows you to duplicate sound on two Bluetooth devices.

Connection to Linux

On Ubuntu, Fedora and other distributions:

1. Install pulseaudio-module-bluetooth: sudo apt install pulseaudio-module-bluetooth
2. Reboot pulseaudio: pulseaudio -k && pulseaudio --start
3. In the audio settings, select Mi True Wireless... as the output device.

FAQ: Frequent questions about Xiaomi Air 2 Pro