Why do you need to synchronize the scales Xiaomi Mi Smart Scale 2 with iPhone?
The Xiaomi Mi Smart Scale 2 is not just a weight measurement device, but a full-fledged fitness tracker that can analyze 13 key body parameters, from body mass index (BMI) to visceral fat. But all of this data becomes really useful only after synchronization with a mobile application. Without connecting to an iPhone, you will only get basic indicators on the scale screen, losing access to measurement history, dynamics charts and personalized recommendations.
The process of connecting to iOS devices has its nuances, from the need to properly configure Bluetooth to selecting a region in the Mi Fit application. Many users experience errors like “cannot find the device” or “connection is interrupted” – and these are the problems we will discuss in detail. In this article, you will find not only step-by-step instructions, but also unique solutions for iPhones with iOS 17+, where standard methods often do not work due to updated Apple security protocols.
What you need to connect: full list
Before you start syncing, make sure you have everything you need, and missing at least one item from the list can cause connection failures.
- 📱 iPhone with iOS 12.0 or later (optimum - iOS 15)+)
- 🔋 Xiaomi Mi Smart Scale 2 with a battery charge of at least 20%
- 📲 Mi Fit (last version from the App Store)
- 🔄 Stable Internet connection (Wi-Fi or mobile network) 4G/5G)
- 🔒 Xiaomi account (can be created directly in the app)
- 📡 Bluetooth enabled on iPhone (version 4.0 or higher)
Pay special attention to the regional settings of your Xiaomi account. If the profile indicates China, some weights functions may be limited. For Russia and CIS countries, it is recommended to choose the region "Europe" or "Russia" - this affects the units of measurement (kilograms vs pounds) and the availability of synchronization servers.
Step-by-step instructions: how to connect the scales to the iPhone
Follow this algorithm to avoid common errors, and if you have problems at some point, go straight to the "Resolving Common Errors" section.
- Install the Mi Fit app Download it from the App Store and open. When you first start, the system will prompt you to create a Xiaomi account or log in through an existing one. Use the same account as other Xiaomi devices (if any) so that the data is synced in one profile.
- Add a new device Click on the profile icon in the lower right corner → Add device → select Libra category → find the Mi Smart Scale 2 model in the list. If there is no model, update the application or check the account region.
- Stand on the scales with one foot - this activates the connection mode. The scale screen will flash Bluetooth icon. If the indicator does not light up, check the battery (press the button at the back - should light up the diode).
- Complete the pairing in the Mi Fit app automatically finds the scales. Confirm the connection in the pop-up window. PIN-Enter 0000 (standard code for all Xiaomi devices).
☑️ Checklist before connection
Once successfully connected, the scales will appear on the device list in Mi Fit. Now you can start the first measurement. Importantly, the first 2-3 weigh-ins may show inaccurate data - this is normal, since the scales take time to calibrate the sensors.
Customize user parameters for accurate measurements
To scale Xiaomi Mi Smart Scale 2 showed the most accurate data, you need to correctly fill out a personal profile in Mi Fit.
Go to Profile → Personal Data and specify:
- 👤 Gender (male/female) – affects the algorithms of body composition analysis
- 📏 Growth to within centimeters (use roulette, not by eye")
- 🎂 Date of birth (age is taken into account when calculating metabolic age)
- 🏃♂️ Activity level (sedentary/moderate/active) – to adjust goals
For athletes and people with non-standard physique (for example, bodybuilders), it is recommended to manually adjust the baseline fat level in the weight settings. → Mi Smart Scale 2 → Settings → Correction of body data.
💡
If you are weighing in the morning on an empty stomach, set the parameters "Measurement after waking up" in the settings of the scales - this will improve the accuracy of metabolic indicators.
| Parameter | How measurements affect | Recommendations for completion |
|---|---|---|
| Age. | Corrects the norms of fat and muscle mass | Specify your real age, not “rejuvenate” yourself |
| Growth | Used to calculate BMI and ideal weight | Measure your height in the morning (maximum in the day) |
| Paul | Changes the algorithms of body composition analysis | Choose according to the passport data |
| Activity level | Influences recommendations on calorie intake | Choose a moderate if you exercise 2-3 times a week |
Solving Common Connection Errors
Even with the correct following of the instructions, problems can arise, and here are the most common errors and proven ways to fix them:
1.The scales are not in the Mi Fit app
- 🔄 Reset the scales: Remove the batteries for 10 seconds, then insert back
- 📱 Restart Bluetooth on iPhone: Settings → Bluetooth → Off/On
- 🌐 Check your account region: China region may block device search
- 📋 Remove the scales from the list of Bluetooth devices on iPhone and reconnect
2. the connection is interrupted at the interface stage
This problem often occurs on iPhones with iOS 16+.
- Open Settings → Privacy → Geolocation Services
- Find Mi Fit and choose Always
- Return to the app and reconnect.
3.The scales are connected, but are not transmitting data
Check it out.
- 📶 Internet connection quality (data synchronized via cloud)
- 🔋 Level of charge of scales (at a rate below 15%, data transmission is blocked)
- 🔄 Version of the firmware of the scales (update through the device settings) → Update of the PO)
What to do if the scale shows an E1 error
⚠️ Warning: If after all the manipulations, the scales never connected, try using another iPhone or Android device for initial setup. Sometimes the "first pairing" only passes with Android, after which the scales work normally with iOS.
Synchronize data with Apple Health and other services
One of the key features of Mi Fit is the ability to export data to Apple Health, which allows you to analyze weight dynamics along with other health indicators (steps, sleep, heart rate) in one place.
To enable synchronization:
- Open Mi Fit → Profile → Settings → Data Synchronization
- Select Apple Health and allow access to all options
- In iPhone Settings → Privacy → Health Check that Mi Fit has access to data recording
Xiaomi Mi Smart Scale 2 also supports integration with:
- 📊 Google Fit for users using the Google ecosystem
- 🏃 Strava – for athletes who track progress in training
- 🍽 MyFitnessPal – to automate calorie counting
💡
For accurate synchronization with Apple Health, it is necessary that both apps have the same personal data (height, weight, gender, date of birth).
Operational tips: how to extend the life of weights
Xiaomi Mi Smart Scale 2 is designed for 5+ years of operation, but only with proper care.
- 🚿 Avoid putting moisture on the contacts of the battery compartment.
- ☀️ Do not place scales under direct sunlight or near heat sources (batteries, heaters).
- ⚖️ Check accuracy regularly (once a month) on a control load (e.g. a bottle of water). 1-2 les).
- 🔋 Use high-quality batteries (alkaline Duracell or Energizer are recommended).
If the scales start to show inaccurate data, perform a calibration:
- Make sure that the scales are on a flat, solid surface (not on the carpet!).
- Stand on the scale and hold the weight for 5 seconds until the beep.
- Repeat the procedure 3 times in a row to automatically calibrate the sensors.
⚠️ Warning: Do not put objects heavier than 150 kg on the scales, this can damage the strain gauges. Also avoid sharp impacts on the surface (for example, jumping to test strength).