How to turn on the Haylou RT LS05S smartwatch: the full guide

The first turn on of the Haylou RT LS05S smartwatch can be a real test for nerves if you are not familiar with the logistics of modern electronics. Manufacturers often discharge batteries before being sent to warehouses to prevent the degradation of lithium chemistry during prolonged storage. Which is why a device just removed from the box may not respond to touching a screen or button.

In this article, we will discuss in detail the algorithm for activating Xiaomi smart watches, consider the possible causes of the lack of reaction and how to eliminate them. You will learn how to properly prepare the gadget for the first start to avoid false conclusions about marriage.

Don't panic if the light doesn't light up immediately after you're connected to the grid. The battery wake-up process sometimes takes time, especially if the watch has been in storage for months without recharging. Follow the instructions below for a proper start-up.

Preparation for the first start of the device

Before you look for the power button, you need to make sure that there is at least a minimum charge in the battery. Factory packaging often involves storing the device in deep sleep. To activate the Haylou Solar Smart Watch, you will need an original magnetic cable that comes with the kit.

Connect the charger to a power source with a current of no more than 1 Ampere. Using powerful fast-charging units from smartphones can be dangerous for the watch's power controller. Pay attention to the contacts: they must fit tightly to the back of the case.

When you plug in, pay attention to the screen. If it's black, don't be in a hurry to turn off the cable. Leave the device on charge at least for a few minutes. 15-20 During this time, the system controller will accumulate enough power to launch the starting logo.

• 🔌 Use only the original cable or certified analogue with similar characteristics.
• 🔋 Avoid using Power Bank with unstable output current for primary charging.
• 🧼 Wipe the contacts on the back with dry cloth before connecting to rule out oxidation.
• ⏱ Leave the watch to charge for at least 20 minutes before attempting forced switching on.

It's important to understand that the visual charge indication may not appear immediately. In some versions of Haylou's firmware, the screen only lights up after a certain voltage threshold has been reached. If the screen is still black after 30 minutes, move on to the next section.

Search for the power button and mechanical activation

Many users mistakenly believe that the Haylou RT LS05S has a separate power button, like smartphones. In fact, this model, like most modern trackers, does not have a dedicated power button in the classic sense.

It's on the right side of the device. To start the watch, you need to press it long enough. Hold your finger on the button for 3-5 seconds. You should feel a slight vibration or see the brand logo on the display.

⚠️ Warning: Do not exert excessive force when pressing. The mechanism of the button is sensitive, and strong pressure can damage the inner membrane or tightness of the body.

If a long press doesn't work, check if the mode is activated. In rare cases, double pressing or a combination of actions is required, but for the LS05S model, the standard is retention. Make sure your fingers are dry, as moisture can worsen the tactile contact with the touch surface of the button.

In the case when the mechanical action does not work, and the charging is underway (the indicator is on fire, if any, or the watch is warming), the problem may lie in the software freeze, then you will need a forced reboot procedure, which will be discussed below.

The forced reset procedure (Hard Reset)

When standard methods fail, Hard Reset comes to the rescue, a software-based resuscitation technique that resets errors in the controller's memory. For the Haylou RT LS05S, the algorithm of actions is specific and requires precise timing.

First, connect the watch to the charger. Wait for at least the minimum system response (screen blinking or vibration). Then, without turning off the cable, press the side button and hold it for 10-15 seconds. The screen should go out and light up again with the Haylou logo.

If you don't do it the first time, repeat the procedure by increasing the retention time to 20 seconds. Sometimes it takes longer for the system to initialize the bootloader. It's important not to release the button when the screen goes out, which is the critical moment of restart.

💡

The successful reboot is confirmed by the appearance of the Haylou logo and the transition to language choice, if the screen flashes and goes out cyclically, the battery problem.

Once the device is successfully restarted, it will go into pairing mode. Don't try to turn on all the functions immediately. Let the system boot up fully, which can take up to 1-2 minutes on the first start.

Connection with a smartphone and installation of software

By itself, the included gadget is useless without a bundle with a smartphone. Haylou Solar requires the Haylou Fun app (or Haylou Sport depending on the firmware version), download it from Google Play or the App Store.

Don't try to connect through the standard Bluetooth menu of your phone's settings. This is a common mistake. The pairing should be done exclusively within the app. Open the program, register your account, and click "Add Device."

When you search, the phone can ask for permissions to access geolocation and Bluetooth, which is a requirement for Android and iOS, and without those permissions, scanning devices won't work.

• 📱 Download the official Haylou Fun app from a trusted source.
• 📍 Allow access to geo-position in smartphone settings before searching.
• 🔗 Do not use the Bluetooth menu system Android/iOS plug-in.
• 🔄 Make sure that the Bluetooth on your phone is active and visible to other devices.

If the phone can't see the watch even though it's on, try rebooting Bluetooth on your smartphone or logging out of the app and logging in again. Sometimes cleaning up the companion app's cache helps.

Diagnostics of screen and sensor problems

There are times when the watch is turned on (vibrates, sounds), but the screen remains black, which may indicate a problem with the backlight or the display plume, in some cases, calibrating the sensor through the engineering menu helps, but for ordinary users access to it is limited.

Check your power saving settings. The app can activate Always Off or the wrist lift is off. Try pressing a button or touching the screen. If you have a response (vibration) but no image, it's a hardware malfunction.

⚠️ Warning: If you see colored stripes, artifacts or broken pixels on the screen immediately after you turn on, do not try to treat this programmatically.

Also worth checking is brightness. In rare cases, after resetting, the brightness is turned to zero. Try to find the brightness slider in the watch menu or in the application and increase its value.

💡

To check the sensor, draw a circle around the screen with your finger, and if the watch reacts with a vibration or a menu transition, the touchscreen is intact, and the problem is in the software or the plume.

If you notice that the sensor is late or "jumping," wipe the screen with a soft cloth. Static electricity or greasy spots can distort the capacitive layer.

Frequently Asked Questions (FAQ)

In this section, we have collected answers to the most popular questions that arise from owners of the Haylou RT LS05S when you first get acquainted with the device.

Following these guidelines will help you successfully activate your smartwatch and enjoy its functionality. Remember that careful electronics and the use of original accessories prolong the life of the device.