Xiaomi ultrasonic face cleaner: detailed instructions for use

Xiaomi’s ultrasonic face cleanser is a compact and efficient device that helps to cleanse the skin deeply of contaminants, excess sebum and dead cells. Thanks to high-frequency fluctuations (about 28,000 Hz), the device carefully removes even microscopic particles without injuring the epidermis. However, many users are faced with questions: how to properly prepare the skin before the procedure, what settings to choose for different skin types, and how to avoid common errors in use.

In this article, we'll look at not only the basic instructions for use, but also the nuances that manufacturers often miss, such as why using a dry skin cleaner can lead to microcracks, how to properly disinfect nozzles, and what cosmetics are compatible with ultrasonic cleaning, and you'll also find a comparative table of operating modes for different tasks, from daily care to combating black dots.

What is an ultrasound face cleanser and how does it work

An ultrasonic cleaner is a device that uses high-frequency vibrations to deeply clean pores and remove contaminants. Unlike mechanical scrubs or brushes, ultrasound works with care without damaging the top layer of the skin. It works on the cavitation effect: microscopic air bubbles formed by ultrasound explode on the skin surface, pushing out sebaceous plugs and dust particles.

Xiaomi models (e.g. Xiaomi InFace Ultrasonic Skin Scrubber or Viomi Ultrasonic Facial Cleanser) are usually equipped with:

• 🔹 Multiple intensity regimens (for sensitive, normal, or oily skin)
• 🔹 Interchangeable nozzles (for cleaning, massage or serum administration)
• 🔹 Waterproof housing (for use under the shower)
• 🔹 Battery with autonomous operation up to 30-60 minutes

It's important to understand that ultrasound is not a substitute for full washing, it's a complement to it.

• 🖤 Black dots (comedones) in the T-zone
• 🖤 Excess sebum (shoulder)
• 🖤 Dead cells that make skin dull
• 🖤 Makeup residues not removed by micellar water

⚠️ Warning: The ultrasound cleaner is not designed to remove deep acne or inflamed acne; its use on damaged skin can exacerbate irritation.

Preparation of the skin before the procedure: a step-by-step algorithm

Incorrect skin preparation negates the effectiveness of ultrasound cleaning, and this is what you need to do 10-15 minutes before the procedure:

1. Washing with a mild cleanser. Use a gel or foam without alcohol and aggressive surfactants (such as CeraVe or La Roche-Posay). Avoid scrubs - they can damage the skin before ultrasound.
2. Steaming (optional). For better opening of the pores, hold your face over a warm herbal broth (chamomile, calendula) or apply a hot wet towel for 3-5 minutes.
3. Conductive gel application. Ultrasound only travels through liquid medium. Use a special gel for ultrasound devices (for example, Ultrasound Gel) or aloe vera. It does not work: ordinary cream, oil or tonic.

If you have dry or sensitive skin, apply a thin layer of hyaluronic acid moisturizing serum before the procedure, which will help avoid tightening after cleaning.

Wash without alcohol-containing products |

Skin vapor (optional) |

Apply conductive gel or aloe vera |

Remove metal jewelry (earrings, piercings)-->

Step-by-step: how to use a Xiaomi cleaner

The usage algorithm may vary slightly depending on the model, but the overall scheme is the same for most Xiaomi ultrasonic cleaners. Consider the process using the example of Xiaomi InFace Ultrasonic Skin Scrubber:

1. Charge the device. Make sure the device is charged (the indicator should be green). Full charge time is about 2 hours.
2. Selection of nozzle. 🔄 Flat nozzle to clean the T-zone and cheeks. 🔄 Curved nozzle to the nose and chin. 🔄 Point nozzle to work with black dots.

Initiation and mode selection.

soft-slack

intense

serum

Skin treatment.

massage-line

Completion of the procedure.

After use, wash the nozzles with warm water and soap and dry on a clean towel. Do not use aggressive detergents - they can damage the coating.

⚠️ Warning: If you feel a tingling or burning sensation during the procedure, stop using immediately, which may indicate an allergic reaction to the conductive gel or an over-intensity.

💡

To enhance the effect before ultrasonic cleaning, apply an enzyme peel to the skin (for example, with papain or bromelain), which will soften the keratinized layer and make it easier to remove contaminants.

Frequent errors when using an ultrasonic cleaner

Even experienced users sometimes make mistakes that reduce the effectiveness of the procedure or harm the skin, and here are the most common ones:

• 🚫 Used on dry skin. Without the conductive gel, ultrasound doesn't work -- it just slides across the surface without penetrating the pores.
• 🚫 Pressure is too strong. You should hold the nozzle at an angle of 15-30 ° and touch the skin slightly, not rub it.
• 🚫 Long-term treatment of one zone, maximum time per site is 5 seconds, otherwise you risk irritation.
• 🚫 Used on inflamed acne. Ultrasound can spread the infection to healthy areas.
• 🚫 Neglecting disinfection of nozzles, after each use, they should be washed and wiped with alcohol (70%).

Another common mistake is combining ultrasound with retinoids or acids (such as glycol or salicylic acids), which thins the skin, and ultrasound can cause redness or peeling, and if you use these products, take a break between treatments for at least 12 hours.

Cleaner care: how to extend the service life

With proper care, Xiaomi’s ultrasonic cleaner will last 3-5 years.

• 🔋 Charge. Use only the original cable. Don't leave the device on charge for more than 3 hours, which shortens battery life.
• 💧 Clean the nozzles. After each use, wash them with warm water with mild soap. Disinfect 70% with alcohol or chlorhexidine once a week.
• 🌡️ Storage. Keep the appliance dry at 5-35 °C. Avoid direct sunlight.
• 🔄 Replace nozzles. The metal coating wears off over time. Replace them every 6 to 12 months (depending on the frequency of use).

If the cleaner stopped turning on or is working intermittently, check:

• 🔌 Charging connector contacts (possibly oxidized).
• 🔋 Charge level (the indicator must flash when connected to the network).
• 🛠️ Integrity of nozzles (cracks or chips may disrupt ultrasound transmission).

⚠️ Warning: If the appliance has fallen into water or has been exposed to moisture when it is on, immediately disconnect it from the network and dry it for at least 24 hours. Do not turn the device on until you have fully verified its dryness.

💡

Regular disinfection of nozzles is not only a guarantee of long service of the device, but also a guarantee of safety for your skin, and bacteria accumulating on metal can cause rashes.

Comparison with other cleaning methods: which is more effective?

Ultrasonic cleansers aren't the only way to clean the skin deeply, but let's compare them to alternative methods.

Ultrasound is effective/safety, even for sensitive skin and does not require remediation (unlike chemical peels), but deep contaminants (such as miliums) may require a combination of other methods to deal with.

If your goal is daily care, an ultrasound cleaner is a great choice. For intensive cleaning (1 time per month), you can alternate it with a vacuum appliance or a professional peel from a beautician.

FAQ: Answers to popular questions