Xiaomi Mi True Wireless Earbuds Basic 2S These devices are still a popular choice among users who value value value for money, but even these simple devices may have questions about first inclusion – especially if you have not used it before. TWS-In this article, we will discuss not only the basic activation process, but also the nuances of synchronization with different devices, possible errors and how to fix them.
The Basic 2S design has a minimalist design without the need for buttons, which sometimes confuses new owners: Where to look for the power button? How to tell if the headphones are ready to connect? Why does one earphone not connect? You can find answers to these and other questions below, with step-by-step photos, work optimization tips and a table of compatibility with devices.
Preparation of headphones for the first turn on
Before you turn on the Xiaomi Mi True Wireless Earbuds Basic 2S, make sure they are fully charged. The charge case comes with a charge case that serves as both a storage case and a power source, and the charge indicator on the case should be green or white, signaling a sufficient charge level.
If the light flashes red or doesn't shine at all, connect the case to the power source using a USB Type-C cable (included). Charging up to 100% takes about 1.5-2 hours. Note: the headphones start charging only after you place them in the nest of the case - the magnetic contacts must match.
- 🔋 Check the case charge level: green light - 100%, yellow - 50-70%, red - less than 30%.
- 🎧 Make sure the headphones are properly placed in the case: left and right should be “clicked” by magnets.
- 🔌 Use an original cable or certified analogue – cheap cables may not provide enough current.
⚠️ Warning: If the headphones don't charge even though the case is connected to the network, try clearing the contacts on the headphones and in the nests of the case with a dry cotton swab. Dust or oxidation can disrupt the connection.
How to enable Xiaomi Mi True Wireless Earbuds Basic 2S: step-by-step instructions
The process of turning on the Basic 2S is different from the classic wired headphones. There is no physical power button, activation occurs automatically when removed from the case. However, additional synchronization is required for the first connection.
Follow this instruction:
- Take both earphones out of the charger case. They should turn on automatically (you will hear the beep).
- On the right earpiece (marked by the letter R), press and hold the touchpad for 5-7 seconds until the indicator flashes red and white (pairing mode).
- On your phone, activate Bluetooth and find Mi True Wireless Earbuds Basic 2S devices. Click to connect.
- Confirm pairing if required. Once successfully connected, the headphone indicator will light up blue.
If the headphones are not identified, try resetting (instructions in the next section). Also make sure that the phone has turned off Bluetooth power saving mode - it can block the search for new devices.
Headphones charged (indicator on the case is green)
Bluetooth on your phone is enabled and visible for all devices
Headphones removed from the case and are located next to the phone (no further than 1 meter)
The phone's off. VPN or firewall that can block Bluetooth connections-->
Resetting headphone settings: when and how to do
Resetting Xiaomi Mi True Wireless Earbuds Basic 2S to factory settings may be required in several cases:
- 🔄 The headphones do not connect to the phone despite repeated attempts.
- 🎵 The sound is interrupted or played in only one headphone.
- 🔊 After the firmware update, there were malfunctions in the work.
For reset, perform the following actions:
- Place both headphones in the charging case and close the lid.
- Open the case cover and press simultaneously on the touch panels of both headphones.
- Hold them for 15-20 seconds until the indicators start flashing red (first go out, then blink).
- Release the buttons, the reset is complete, and now you can reconnect the headphones as a new device.
⚠️ Warning: After reset, all the stored devices will be deleted from the memory of the headphones. If you used them with several gadgets (for example, a phone and a laptop), you will have to reconnect them.
Xiaomi Smartphone
Smartphone of another brand (Samsung, iPhone, etc.)
Laptop or PC
Tablet
Other-->
Synchronization with different devices: Android, iOS, Windows
While the Xiaomi Mi True Wireless Earbuds Basic 2S is optimized for the Xiaomi ecosystem, it is compatible with most Android, iOS and even Windows devices.
| The device | Support | Features | Limitations |
|---|---|---|---|
| Xiaomi smartphones (MIUI) | ✅ Complete. | Automatic connection, access to branded sound settings | No. |
| Android (other brands) | ✅ Complete. | It works like a standard Bluetooth device. | No access to Xiaomi brand settings |
| iPhone (iOS) | ✅ Partial | Supported basic functions (playback, pause, answering calls) | No AAC codec support, possible audio delays |
| Windows 10/11 | ✅ Partial | Connects as a headset (microphone + speakers) | No gesture control, possible problems with multichannel sound |
To connect to an iPhone or MacBook, you may need to manually select an A2DP profile in your Bluetooth settings. On Windows, installing Qualcomm Atheros Bluetooth drivers sometimes helps (if standard drivers don’t provide a stable connection).
💡
If the headphones connect to the phone but the sound is only coming through the speaker (not the headphones), go to Bluetooth settings, find Mi True Wireless Earbuds Basic 2S and turn on the "Use for Media" option.
Common Problems and Their Solutions
Even after a successful connection, users of Xiaomi Mi True Wireless Earbuds Basic 2S may face typical problems, including the most common ones and ways to fix them:
- 🔇 One earphone doesn't work: Check if the silent earphone is charged (put it in the case for 10 minutes). Reset (see section above) and reconnect. If the problem persists, clear the contacts on the earphone and in the case.
- 🎵 The sound is interrupted: Make sure there are no obstacles (walls, metal objects) between the phone and the headphones. Turn off Bluetooth power saving mode on the phone. Try reconnecting the headphones or resetting them.
- 🔊 Low sound quality: In Bluetooth phone settings, select a High-quality audio profile for headphones (AAC/aptX). Update the firmware on your headphones (if available) and check if the phone is on an aggressive equalizer.
If the headphones start to run out quickly, the battery may have worn out, in which case replacing the battery in the service center will help (self-repair is not recommended due to the risk of damage to the board).
What if the headphones are not defined by any device?
Additional features and hidden capabilities
Despite the budget status, the Mi True Wireless Earbuds Basic 2S supports a few useful features that many users are unaware of:
- 🎶 Playback control: One tap on the touchpad is pause/play. Double tap is the next track. Triple tap is the previous track.
- 📞 Call reception: One tap is answer/complete. Double tap is rejecting incoming.
- 🔊 Activate Voice Assistant: Press and hold the Touch Bar for 2 seconds to call Google Assistant or Siri.
On Xiaomi devices with MIUI 12+, additional settings are available through the Mi Earphones app (download to Google Play).
- Set up an equalizer for different genres of music.
- Update the headphones (if available).
- View the charge level of each headphone separately.
💡
For maximum compatibility with iPhone, set your phone and media profile in Bluetooth settings – this will reduce audio delays when watching videos.
Care and extension advice
To make Xiaomi Mi True Wireless Earbuds Basic 2S last longer, follow these guidelines:
- 🧼 Clean: Wash your headphones and case with dry soft cloth 1-2 times a week. Use a cotton swab soaked in alcohol solution (no more than 70%) to remove earwax. Do not use sharp objects to clean the speaker grilles.
- 🔋 Charging: Don't leave your headphones on charge for more than 24 hours - this reduces battery life. Use the original cable or certified Quick Charge-enabled counterparts. Store your headphones in a case - this protects them from dust and mechanical damage.
- 🌡️ Exploitation: Avoid using headphones in temperatures below 0°C and above 40°C. Do not expose them to direct sunlight (for example, leaving them on the dashboard of the car).If moisture (rain, sweat) is in, dry the headphones for 2-3 hours before charging.
The average battery life in the Basic 2S is 300-500 charge cycles. With heavy use (daily charging), the headphones will last about 2-3 years. After that, the battery capacity will begin to decrease markedly, and the battery life will be reduced from 5 to 2-3 hours.