How to wear Xiaomi Mi True Wireless Earbuds Basic 2: detailed instructions with tips

Xiaomi Mi True Wireless Earbuds Basic 2 wireless headphones have become a popular choice among users due to a combination of affordable price, good sound and ease of use. However, even such simple devices have nuances of operation that affect sound quality, comfort and life. The main problem that beginners face is the wrong fit of earphones in the ear, which causes bass hue, there are extraneous noises or discomfort when wearing long-term.

In this article, we will not only discuss the basic instructions for wearing Mi True Wireless Earbuds Basic 2, but also talk about hidden settings that will help improve sound, extend battery life and avoid typical errors. You will learn how to pick up the size of the instalments, check the tightness, synchronize the headphones with the phone and even eliminate common malfunctions associated with improper use. If you’ve just bought these TWS- headphones or have been using them for a long time but feel like something’s wrong, this is the guide for you.

Preparing headphones for the first use

Before you wear the Xiaomi Mi True Wireless Earbuds Basic 2, you need to prepare them properly. This includes charging, syncing with each other and choosing the right fittings. By skipping this stage, you risk connection problems or discomfort.

Start by fully charging the case — even if the indicator shows a partial charge, it is better to bring it to 100%. To do this, connect the case to a power source (for example, to charge from a smartphone) using a USB Type-C cable. Full charging takes about 1.5-2 hours. Note: if the headphones are discharged to zero, they may need to be held in the case for 10-15 minutes before first turning on, so that they “wake up” and start charging.

Next, check the equipment: the box should contain three pairs of interchangeable earpieces (sizes S, M, L). By default, earphones have M-size earpieces, but they may not fit the anatomy of the ear. To determine your size, slightly pull the earpieces on yourself - it should be removed with little effort. If the headphones are left with traces of glue (occasionally on the first use), carefully remove them with a dry wipe.

• 🔋 Case Charging: Use the original cable or certified analogue. Avoid "fast" charging higher than 5W - this can shorten battery life.
• 🔄 Synchronization of headphones: after extraction from the case, they should automatically connect with each other (blitzes a white indicator). If this does not happen, return them to the case and try again.
• 👂 Test of earbuds: Try wearing earbuds with earbuds of different sizes to see which sit tighter but not pressing.

⚠️ Warning: Do not use headphones immediately after delivery in the cold season. If they were stored at temperatures below +5 °C, let them "acclimatize" for 1-2 hours at room temperature. Condensation inside the case can cause malfunctions.

Step-by-step instructions: how to properly wear headphones

Now, the most important thing is the putting on technique, and many people just put headphones in their ears, but that leads to poor leakiness and loss of movement, and the right algorithm has a few steps:

1. Take the earphone with your right hand (for the right ear) and unfold it so that the microphone is directed downwards and the control button is directed to the face.
2. With your left hand, pull the earlobe back and up to open the ear canal.
3. Carefully insert the earpiece into the ear, slightly scrolling it clockwise (for the right ear) or against (for the left) so that the earpiece sits tightly.
4. Make sure the earphone doesn’t stick out – its body should almost completely “hide” in the ear.

After you wear it, check the tightness: cover your ear with your earphone and listen. If the sound is out, the earpiece sits tight. If the sound is unchanged, try a different size or repeat the procedure. You can use the test in the Mi Home app (if the headphones are connected to a Xiaomi smartphone): go to the Device Profile → Headphone Settings → Pressurity Check.

Both headphones are synchronized (white lights are on) |

The sleeves fit tightly but don't press |

Headphones do not fall out when tilting the head |

The sound does not "leak" outward (check by covering the ear with your palm)|

Microphones point to the mouth (for better call quality)

-->

If the headphones are constantly falling out, try the method of “cross-wearing”:

1. Put the right earpiece in your left ear and vice versa.
2. If the fit is better, your ears are asymmetrical, and headphones should be worn “the opposite”.

⚠️ Warning: Don't press your headphones when you put them on - this could damage the speaker or microphone. If the earpieces are too tight, moisten their tip with saliva (this is safe and will improve slippage).

Choice of Ambusheries: How to Choose Size and Material

Ambushes (or "inlays") are removable silicone tips that are responsible for tightness and comfort. The Mi True Wireless Earbuds Basic 2 comes in three sizes: S (small), M (medium), L (large), but even if you think the M size is right, it's worth testing all the options.

To verify:

• 🎵 Play a track with deep bass (e.g. electronic music) If the basses are gone, the insects are too big or too small.
• 🗣️ Talk on the phone, and if someone complains of echoes or hearing loss, the earpieces don't provide enough insulation.
• 🏃 Move your head. If the headphones shift or fall out, the size is wrong.

If standard sleeves are not suitable, alternative options can be purchased:

To replace the earpieces, gently pull the old headpiece off the earpiece and put on a new one, making sure it sat down to the end. Don't use sharp objects, it can damage the speaker grid. If the earpieces start to crumble or lose elasticity, they need to be replaced, even if they are still holding.

💡

If the earbrushes are constantly knocked down in the ear, try to heat them slightly with a hairdryer (not higher than 40 ° C) before putting on - the silicone will become softer and better take the form of the ear canal.

Synchronization with the phone and audio setting

Once the headphones are on, they need to be connected to a smartphone. Xiaomi Mi True Wireless Earbuds Basic 2 supports Bluetooth 5.0 protocol, which provides a stable connection at a distance of up to 10 meters.

1. Open the case cover - the headphones will automatically go into pairing mode (the indicators will flash red and white).
2. On your smartphone, turn on Bluetooth and find Mi True Wireless Earbuds Basic 2 devices.
3. Confirm the connection. Once the synchronization is successful, the headphones will light up in white.

If the headphones are not connected:

• 🔄 Reset settings: Put the headphones in the case, press the button on the case for 10 seconds (the indicator flashes red).
• 📱 Update your firmware: Check for updates in the Mi Home app (if it supports your model).
• 🔋 Charging: Make sure the headphones are charged (indicators on the case should be green or orange).

To improve the sound:

• 🎛️ In Bluetooth settings on your smartphone, select High-quality sound (AAC) or SBC (if you have latency issues).
• 🎧 In the Mi Home app (if available), activate Bass Amplification or Noise Insulation mode.
• 🔊 Adjust the sound balance in a uniform app (e.g. Wavelet for Android).

Common Mistakes and How to Avoid Them

Even experienced users sometimes make mistakes when using Mi True Wireless Earbuds Basic 2, which lead to discomfort or breakdowns.

1. Wearing headphones inside out is easy to confuse left and right headphones, especially if they're symmetrical. The body of Basic 2 has the L (left) and R (right) markings, so pay attention to that.
2. Ignoring hygiene. Earwax and sweat clog the speaker's grid, making the sound worse. Clean your headphones with a soft brush or cotton swab (no alcohol!) once a week.
3. If you leave your headphones outdoors, they'll run out in a few hours, and always put them back in the case after you use them.
4. Use at extreme temperatures: Headphones can be turned off at temperatures below 0°C or above +40°C.

Another common problem is the different volumes on the headphones, which can be caused by:

• 🔊 Clogging the speaker grid (clean with a soft brush).
• 📵 Poor Bluetooth connection (reconnect headphones).
• 🎛️ Settings for sound balance on your smartphone (check Settings → Sound → Balance L/R).

⚠️ Warning: If the volume difference persists after cleaning and reconnecting, this may indicate a hardware fault (e.g., damage to the speaker). In this case, contact the service center - self-repair will deprive you of warranty.

Care and extension of service

To make Xiaomi Mi True Wireless Earbuds Basic 2 last longer, follow the simple rules of care:

• 🧼 Clean: Use a dry soft brush (for example, for camera lenses) or a slightly wet napkin without alcohol. Don't blow into the speaker - this can damage the membrane.
• 🔋 Charging: avoid full case discharge. Optimally keep the charge at 20-80%. Do not use "fast" charges higher than 10W.
• 🌡️ Temperature: Do not leave your headphones in direct sunlight (e.g., on a car torpedo) or in the cold.
• 💧 Humidity: Despite the stated protection against sweat (IPX4), do not wash your headphones underwater or use them in the rain.

For storage:

• Always put headphones in the case - this protects them from dust and mechanical damage.
• If you do not use headphones for more than a week, discharge the case to 50% and store in a cool place.
• Avoid storage near magnets or devices with strong electromagnetic radiation (such as microwaves).

The average lifespan of the Mi True Wireless Earbuds Basic 2, when properly maintained, is 2-3 years. However, the battery begins to deteriorate noticeably after 300-500 charging cycles. If the battery life is reduced to 1-2 hours, it is time to think about replacing the battery (in the service center) or buying new headphones.

💡

Regular cleaning of the speaker grid and contacts in the case prevents 80% of problems with sound and charging.

Solving common problems

If the headphones start to behave strangely, do not rush to carry them for repair.

If the headphones are plugged in, but the sound is only in one of them, try:

1. Disable Mono audio in the settings of the smartphone (on Android: Settings → Special features → Audio → Mono-audio).
2. Reset Bluetooth settings on your phone.
3. Update the headphones (if available).

To reset headphones to factory:

1. Put both earphones in the case.
2. Close the lid.
3. Press and hold the button on the case for 10 seconds until the indicator starts flashing red.
4. Open the lid and reconnect the headphones.

FAQ: Frequent questions about Xiaomi Mi True Wireless Earbuds Basic 2