Connecting Xiaomi Amazfit smartwatch to a smartphone: the full guide 2026

Introduction: Why you need the right setup of smart watches

The Xiaomi Amazfit smartwatch has become one of the most popular wearables due to its combination of functionality, design and affordable price. However, many users face difficulties already at the first connection stage. Incorrect settings can lead to loss of health data, unstable synchronization or even complete failure of the device.

In this article, we will look at all the stages of connection, from installing the Zepp app (formerly Mi Fit) to solving typical errors. GTR 4, Bip 5, T-Rex 2) and operating systems (Android/iOS). You will learn how to avoid common problems and make the most of the opportunities of your watch.

Importantly, the connection procedure may vary slightly depending on the firmware version of the watch and the app, and we have updated the instructions for 2026 in view of the latest updates to the Xiaomi ecosystem.

Preparation for connection: what to do before pairing

Before you start setting up, make sure all the preconditions are met, which will save time and prevent most errors.

Successful connection will require:

• 📱 Smartphone on Android 8.0+ or iOS 12.0+ (iPhone needs a version no lower 6S)
• 🔋 Charge of watches at least 50% (at low charge synchronization may be interrupted)
• 📶 Stable Internet connection (Wi-Fi or mobile Internet) 4G/5G)
• 🔄 Bluetooth 5.0 enabled+ on a smartphone (for models of Amazfit) GTR 4 and newer)
• 📦 Original charging cable (Use of uncertified accessories may block functions)

Special attention to iPhone owners: due to iOS restrictions, some features (such as answering calls through the clock) may not be available.For a full list of restrictions, see Xiaomi's official documentation.

⚠️ Note: If you have previously used a different brand of watch (such as the Huawei Watch or Samsung Galaxy Watch), be sure to remove their profiles from the Bluetooth menu on your smartphone.

Installation and configuration of the Zepp application

The official Zepp app (formerly Mi Fit) is the only supported way to manage the Amazfit watch.

• 🤖 For Android: Google Play
• 🍎 For iOS: App Store

After installation, follow the following steps:

1. Launch the application and select the language (we recommend English or Russian for full localization)
2. Register a Xiaomi account (you can use it) Google/Facebook or by phone number)
3. In the Profile menu → Settings → Region set Russia (this is important for the correct operation of health services)
4. Allow all requests for access to: 📍 Geolocation (for tracking activity) 📁 Storage (for downloading firmware) 📞 Phone (for call notifications) 💬 Notifications (for synchronization of messages)

For users from Russia: If the app requests a Chinese phone number when registering, choose the option of registering via email or social media.

Step-by-step instructions for pairing a clock with a phone

When you're done, you can start the connection itself. 5-7 minutes with a stable internet connection.

Algorithm of action:

1. Turn on the Amazfit watch by holding the side button 3-5 seconds before the logo appears
2. In the Zepp app, click + Add the device in the upper right corner
3. Select your watch model from the list (if no model, select Another device).
4. It'll appear on the clock. QR-code – scan it through the app or enter 6-digit code manually
5. Confirm the pairing on both devices
6. Wait until the synchronization is complete (may take up to 2 minutes)

After successful connection, the application will offer:

• 🔄 Update the firmware of the watch (we recommend doing it immediately)
• ⚙️ Set up the basic parameters (language, time format, units of measurement)
• 🏃‍♂️ Enter personal data (height, weight, age for accurate health tracking)

⚠️ Warning: If during the connection there is an error "Can not connect to the device", check: Is power saving modes on the smartphone disabled? VPN-Connections (they can block Xiaomi servers) Is the Zepp app updated to the latest version

Configure notifications and basic functions

Once you've successfully connected, it's time to customize your watch to suit your needs, and let's start with the most important thing, notifications.

How to set up notifications:

1. In the Zepp app, go to Profile → Your device. → Notifications
2. Enable the Call Notifications and Notifications from the Applications toggle
3. Select the applications from which you want to see notifications on the clock (messengers, mail, calendar)
4. Set up Vibration and Sound Signals in the Reminders section

For models with microphone and speaker (GTR 4, GTS 4):

• 🎤 Enable the option to "Respond to calls in hours" (only for Android)
• 📞 Set up quick answers in Settings → Quick answers
• 🔊 Adjust the volume to Sound and vibration

💡

To save battery power, turn off notifications from underutilized applications. For example, games or news aggregators can drain the clock on the Internet. 15-20% faster.

Don’t forget to set up health tracking:

• ❤️ pulse rate (every 10 minutes or continuously)
• 😴 Sleep monitoring (auto or manual mode)
• 💪 Stress and oxygen levels in the blood (SpO2)

Solving common connection problems

Even if you do all the steps right, you can have difficulties, and let's look at the typical mistakes and how to fix them.

Problem 1: The clock is not defined by the app

• 🔄 Reboot both the watch and the smartphone
• 📱 Remove the watch from the list of Bluetooth devices on your phone and reconnect
• 🔧 In Android Developer Settings, enable Bluetooth Debugging (for power users)

Problem 2: The connection is constantly breaking.

• 📶 Check the stability of the Internet connection
• 🔋 Make sure there is enough charge on the watch (less than 20% can cause crashes)
• 📵 Turn off power saving modes for the Zepp app in your phone settings

Problem 3: Health data is not synchronized

• 🔄 Update the firmware of the watch through Profile → Update of the PO
• 📊 Manually run the synchronization by pulling down on the main screen of the application
• 📅 Check the correct date and time on the clock

💡

If none of the methods worked, try resetting the clock to factory settings via Settings. → System system → Reset. Remember, this will remove all local data from the device.

For Amazfit Bip 5 and later: If the watch stops responding to touch after the update, calibrate the screen through Settings → Display. → Calibration. That'll solve the problem 90 percent of the time.

Additional features after connection

When the basic setup is complete, you can unlock the full potential of your watch.

Installation of dials

• 🎨 In the Zepp app, go to Dials and select from over 100 free options
• 🖼️ For models with Always-On Display, set a separate dial for standby mode.
• 🔄 Sync your favorite dials with cloud storage for quick recovery

Adjustment of sports regimes

• 🏃 Add frequently used sports to Quick Access on the Watch
• 📊 Set up automatic activity recognition (running, walking, swimming)
• 🎯 Set personal goals by steps and calories

3. Integration with other services

• 🌍 Connect to Google Fit or Apple Health to export data
• 🔑 Set up Yandex Weather for accurate local forecasts
• 💳 Add bank cards for contactless payments (for models with a NFC)

For owners of Amazfit GTR 4 and GTS 4 A unique function is available "AI Assistant is a voice assistant with support for Russian:

1. Open the Settings. → Voice assistant on the clock
2. Choose the Russian language
3. Say the phrase "Hi Zepp" to activate

Updating firmware and data security

Regular firmware updates not only add new features, but also fix security vulnerabilities. Here's how to properly update your watch:

Step-by-step process:

1. Make sure your watch is at least 50% charged.
2. Connect to a stable Wi-Fi network (update via mobile Internet may be interrupted)
3. In the Zepp app, go to Profile → Your device. → Update of the PO
4. If an update is available, click Download and Install
5. Do not interrupt the process and do not turn off the clock until it is completed (may take time). 10-15 minute)

Important nuances:

• 🔒 After the update, the clock automatically restarts.
• 📥 All settings will remain, but dials can be reset to standard
• 🔧 If the update is hanging, hold the power button for 15 seconds for a forced reboot.

To protect your data:

• 🔐 Enable Two-Factor Authentication in your Xiaomi account
• 📱 Regularly back up your health data in your Profile → Settings → Backup
• 🚫 Disable location access for Zepp if you don’t use route tracking

💡

Never install firmware from unverified sources, which can lead to device locking or personal data leakage.

FAQ: Frequently Asked Questions