Owners of wireless headphones often face a situation where the device discharges at the most inopportune moment, and there is an urgent need to quickly restore their performance. The question of how much the Xiaomi AirDots charge is one of the most popular among users of the Mi ecosystem, since the response to it depends on the planning of using the gadget during the day. The standard time for full charging of the headphones themselves is usually about one hour, but this parameter can vary depending on the specific model and the residual capacity of the built-in battery.
It is important to consider that the full cycle includes not only the restoration of energy in the inserts themselves, but also the charging case, which acts as a power bank. If the case is discharged completely, the process can take much longer, sometimes up to one and a half to two hours, especially if the power supply is used with low current. Understanding these time intervals helps to properly organize the use of the gadget and avoid situations where the music is interrupted due to a dead battery.
Modern models, such as Redmi Buds or newer versions of AirDots, may have different characteristics of power consumption and charging speed. In this article, we will discuss in detail the technical features of various modifications, the effect of charging cable type and temperature regimes on the rate of replenishment, and also consider indicators that signal the status of the process.
Charging time depending on the model
The first generation of the legendary Xiaomi Mi True Wireless Earbuds Basic, often referred to simply as AirDots, had about 40mAh batteries in each headphone. It took about 60 minutes to fully restore the capacity of these batteries, subject to the use of a standard headphone. USB-The case in this model had a capacity of 300 mAh and charged about 1.5 hours, which combined gave the user several complete cycles of listening to music without connecting to the network.
Newer versions, including Xiaomi Redmi AirDots 2 and Xiaomi Mi True Wireless Earphones 2 Basic, have kept the same time frame, but optimized power controllers. In these devices, the charging time of the headphones themselves is also about one hour, but thanks to improved energy transfer efficiency, heating is reduced while doing so, allowing thinner cables to be used without the risk of contacts overheating.
Flagship models of the line, such as Xiaomi Mi True Wireless Earphones 2 Pro or Redmi Buds 3 Pro, support fast charging technology. In such devices, 10 minutes in a case can provide up to 2-3 hours of music listening, although a full cycle still takes the standard 60-90 minutes. This is a critical difference that makes using premium models more comfortable in the face of time constraints.
- 🎧 Classic AirDots 1: ~60 minutes (earphones), ~90 minutes (case).
- 🎧 Redmi AirDots 2 / S: ~60 minutes (earphones), ~120 minutes (case).
- 🎧 Mi True Wireless 2 / 2S: ~60 minutes (earphones), ~120 minutes (case).
- 🎧 Redmi Buds 3 / 3 Pro: ~60 minutes (earphones), ~150 minutes (case with support) QC).
It's worth noting that real time may be slightly different from what the manufacturer has claimed because of the wear and tear of the battery. Lithium polymer batteries lose their rated capacity over time, which can lead to faster charge, but also to a faster discharge. If your headphones charge in 15 minutes but only last 30 minutes, this is a sure sign of degradation of the chemical composition of the battery.
Factors affecting charging speed
The power recharge rate in Xiaomi AirDots is directly dependent on the power source you use. USB-The port of a computer is often less efficient than using a network adapter, as the current in the PC port can be limited to 0.5 A or even less. For optimal speed, it is recommended to use adapters with current strength from 1 A to 2 A, although the controller inside the case will limit the incoming current to a safe value.
The quality and length of the charging cable also play a significant role in this process: cheap thin-vein cables have high resistance, which leads to a drop in voltage at the input to the case and, as a result, to an increase in charging time. Using the original short cable, which comes with a kit, or a quality analogue labeled 2A, allows you to minimize energy loss.
⚠️ Note: Using powerful Quick Charges (Power Delivery) for older case models can cause overheating. Although protection controllers usually handle this, long-term charging above 1A is not recommended for devices without support for appropriate protocols.
Ambient temperature is another critical factor that is often overlooked: Chemical reactions inside the battery are slower at low temperatures, which can increase charging time by one and a half to two times, and being in direct sunlight is also undesirable, since overheating can activate the thermal protection and stop the process until cooling down.
💡
The ideal temperature for charging Xiaomi AirDots is from +10 ° C to +25 ° C. Avoid leaving the case on the windowsill in winter or in the car in summer.
Charging status indication
Understanding the LED lights allows you to determine exactly where the process is. The case case Xiaomi AirDots usually has one LED that changes color or blink mode. When the light is red, there is an active charging process, and white indicates a complete cycle completion or high charge level.
The headphones themselves also have micro-LEDs that light up when installed in the case. Red light means that charging is underway, and turning off the indicator indicates a full charge of the headphone battery. In some models, such as the Mi True Wireless Earphones 2, the indication can be more complex, including flashing different colors to indicate errors or low charge.
| Status of the indicator | Meaning | User action |
|---|---|---|
| Red is burning. | Charging's coming. | Waiting. |
| Red flashes | Low charge/mistake | Check the contact |
| White burns | Charge 100% / Ready | We can use it. |
| It's not burning. | No power / Unloaded | Connect the cable |
It is important to distinguish between flashing the indicator when charging and when pairing. In charging mode, the blinking rhythm is usually uniform and calm, whereas in TWS pairing, it can be more frequent or intermittent. If the indicator behaves strangely, for example, flashing red and white at the same time, this can indicate a controller malfunction or poor contact.