How much is charging for Xiaomi watches in 2026: the original, analogues, where to buy more profitable

Xiaomi smartwatches are some of the most popular wearables on the market due to their price-to-function ratio, but even the most reliable devices require periodic recharging, and the original chargers tend to get lost, break down or just wear out over time. If you find yourself in a situation where you urgently need to buy a new charger for Mi Band, Xiaomi Watch or Xiaomi Watch S1, But you don’t know where to look and how much it will cost – this article will help you understand.

Prices for chargers for Xiaomi watches vary from 200 to 2500 rubles, depending on the model, type of charging (wired / wireless) and the originality of the accessory. The difference between the original and the quality analogue can reach 300-500%, but not always the high price guarantees the best quality.

• 🔍 Current prices for original and non-original charging for different models of Xiaomi watches (data for 2026).
• 🛒 Where to buy cheaper: official shops vs marketplaces vs Chinese websites.
• ⚡ How to distinguish the original from a fake and avoid buying a low-quality accessory.
• ⚠️ What is dangerous cheap charging for the battery of your watch.

You will also learn whether you can charge Xiaomi watches from Power Bank, why some charging stops working after a month, and what to do if the original cable is lost, and in stores it is not available.

1.Original charging prices for Xiaomi Watch in 2026

Xiaomi’s official chargers are sold in branded stores, authorized dealers, and some marketplaces, with the main advantage of guaranteed compatibility and battery safety, but the price is often bite-bitten, especially when it comes to wireless charging models.

Below is a table with current prices for original charging for popular Xiaomi watch models (as of June 2026):

Note that the prices of original accessories can rise dramatically if the watch model is discontinued (such as the Mi Band 6), in which case it makes sense to consider quality analogues – more details in the next section.

⚠️ Note: Some marketplaces (e.g. AliExpress) have sellers who give out unoriginal charges as "official." Always check the serial number on the package and customer reviews with photos.

2.The cost of non-original charges: when the savings are justified

Non-original chargers for Xiaomi watches cost 2-5 times less, but their quality varies greatly. A good analog can last for years, and a cheap fake can burn the charging controller or disable the battery.

Average prices for non-original charges (according to Wildberries, AliExpress and Ozone):

• 🔌 Mi Band 7/8: 150–400 rub. (magnetic cable).
• 🔋 Xiaomi Watch S1: 500-1 200 rubles (wireless station).
• ⚡ Xiaomi Watch 2 Pro: 700-1 500 rubles. (USB-C variant).

Where to look for quality analogues:

1. AliExpress is the cheapest, but the risk of getting married%+ and number of orders from 1,000+.
2. Wildberries/Ozon — Prices are higher, but there are reviews and the possibility of returning the goods.
3. Specialty stores (such as Xiaomi Shop in Telegram) – often sell “half-bone” with good quality.

How to distinguish a good analog from a dangerous one:

Magnets hold the clock tightly (do not fall off with a slight movement)|

The cable is not thinner than 1 mm (thin wires are quickly wiped over)|

The package shows the charging current (for example, 5V/0.5A)|

There is a security certificate (CE, RoHS)|

Photos/videos from real buyers-->

⚠️ Attention: Cheap charging without a current controller can reduce battery capacity by 20 to 30% in 6 months due to improper charging cycle.

3. Why the original charging is more expensive: analysis of technical nuances

Many users wonder why a simple magnetic cable for the Mi Band 8 costs 800 rubles, when its analogue on AliExpress can be bought for 200 rubles.

1. Charging Controller: Original devices have a built-in chip that:

• 🔄 Regulates current and voltage for careful charging of the battery.
• 🛡️ Protects against overheating and short circuit.
• ⚡ Optimizes charging speed (e.g. Xiaomi Watch) S1 Charges in 2 hours with the original station vs 3-4 hours with analogue).

Materials: Original charges use:

• 🧲 Stronger magnets (do not fall off when moving).
• 🔌 Enhanced contacts (not oxidized over time).
• 📦 Quality cable insulation (does not crack when bending).

3. Warranty: Official accessories Xiaomi have a warranty of 12 months, while analogues - a maximum of 1-3 months (and then not always).

But it's not always the original. For example, for the Mi Band 7, the charging speed difference between the original and the good one is only 10-15 minutes, and the price is 3 times, and here the savings make sense.

4.Where to buy a charger for Xiaomi Watch cheaper: comparison sites

The price of the same accessory can vary by 30-100% depending on the place of purchase, and below is a comparison of popular sites with regard to delivery and risks:

If you need to charge urgently, you should choose Wildberries or Ozone - delivery takes 1-3 days. AliExpress is suitable for saving, but you will have to wait 2-4 weeks.

💡

Before buying on AliExpress, check if the seller supports a refund for no reason (the option is “15 days to return”).

5.Can you charge the Xiaomi Watch without the original charge?

Situation: the charging is lost, but the new one is not available. Can alternatives be used? The answer is yes, but with reservations.

Option 1: Charging from Power Bank.

• ✅ It works if you have a Mi Band with a USB-cable (can be connected directly).
• ❌ Not suitable for Xiaomi Watch S1/S2 — We need a magnetic docking station.

Option 2: Wireless charging (for supported models)

• ✅ Xiaomi Watch 2 Pro and Watch S1 Pro support Qi-charging (you can use the station from a smartphone).
• ❌ Charging speed will be lower, there may be failures in synchronization.

Option 3: Homemade adapter.

Important: Do not use charging from other devices (such as Apple Watch or Samsung Galaxy Watch) – different manufacturers use different charging protocols, which can cause battery damage.

6.How to Check Xiaomi Watch Charging Before Buying: 5 Key Tests

To avoid getting into a marriage or forgery, make these checks before you buy (or immediately after you receive it):

1. Magnet test. Put the charge on a metal object (like a scissor) If the magnets are weak, the cable will quickly fall off when you move.
2. Check the contacts. Check the jack under the magnifying glass: the original contacts are golden, the fakes are dull or rusty.
3. Heat test. Connect the charger to the power source for 10 minutes. If it's too hot, it's marriage.
4. Use a tester (multimeter) or an app like Ampere (for Android). Normal charging current for the Mi Band is 0.3–0.5A.
5. Compatibility test. Connect the charge to the clock. If the charging icon appears on the screen, it's okay. If it's not, check the cable on another device.

💡

If the charge is not recognized by the clock, but the cable is good, the problem may be the oxidized contacts on the watch itself.

If you buy a charger on AliExpress, be sure to take a picture of the packaging and the device before you first use, which will help you get back the money if the item turns out to be defective.

7.Frequent charging problems Xiaomi Watch and how to fix them

Even the original chargers sometimes fail, and here are the most common problems and solutions.

If none of these methods worked, the problem may be the power controller of the watch itself, which will require repairs at the service center (cost – from 1,500 rubles).

⚠️ Please note: Don’t try to disassemble the Xiaomi Watch. S1/S2 their own - their body is glued together, and when you open it, you can damage the display or battery.

FAQ: Frequent questions about charging for Xiaomi Watch