Why Notifications Are Coming to Xiaomi Mi Band 6 – Full Diagnostics and Fix

Your Xiaomi Mi Band 6 stopped vibrating when calling, didn't display messages from messengers or ignored all notifications? The problem is common, but in 90% of cases it is solved without going to the service center, the reasons lie in the settings of the bracelet itself, and in the smartphone — from the banal disconnected Bluetooth to conflicts between applications.

In this article, we’ll look at all possible scenarios for why notifications don’t reach Mi Band 6, from obvious ones (for example, forgetting to turn on alerts in the Mi Fitness app) to hidden ones (like synchronization failure due to Android’s energy-saving mode).

We will focus on specific Mi Band 6 firmware bugs (version 1.0.6.54 and below) that block notifications from individual applications (such as WhatsApp or Viber) even when the settings are correct, which are rarely mentioned in standard guides, but they often cause problems.

1. Check basic settings: Bluetooth, resolutions and Mi Fitness

Start with the obvious, the physical connection between the bracelet and the smartphone. Even if the status bar of Android displays a Bluetooth icon, this does not guarantee a stable connection to the Mi Band 6. For example, on Xiaomi/Redmi with the MIUI shell, background “optimization” often works, which breaks the connection after 5-10 minutes without activity.

Open the Settings. → Bluetooth on your phone and check it out:

• 🔵 Connection status – next to the Mi Band 6 should be written “Connected” (not “Conjugated"!).
• 📱 Autoconnection – in the device settings (cog next to the bracelet name) turn on the option “Automatic connection".
• 🔄 Reconnect – if the status is unstable, remove the bracelet from the list and re-coat.

Next, go to the Mi Fitness app (or Zepp Life for newer versions) and check three options critically:

1. Profile → Mi Band 6 → Notifications – the “Enable Notifications” slider should be active.
2. Profile → Mi Band 6 → Applications – select the messengers from which you want to receive notifications (by default, Telegram, VK or corporate mail can be disabled).
3. Settings → Associated devices – make sure the bracelet is displayed as “Connected” (green tick).

💡

If the application list in Mi Fitness does not have the right messenger (for example, Slack or Discord), try manually adding it through Settings → Notifications → Other applications. Not all versions of the software support this option, but it works in firmware 1.0.7.14+.

Synchronization problems: why the bracelet "can't see notifications"

A common cause is conflict between background processes. Android (especially on MIUI, ColorOS or EMUI) aggressively shuts down battery-saving apps, including Mi Fitness, which results in the bracelet losing touch with the smartphone, even though Bluetooth formally remains on.

To fix this:

1. Open Settings → Applications → Application Management → Mi Fitness.
2. Choose the Battery. → Without limitation (or "Allow background activity").
3. Enable AutoRun (on MIUI, it's Settings → Permissions → AutoRun).
4. For Samsung: Add Mi Fitness to the “Do Not Optimize” list (Settings → Device Service → Battery → Uncontrolled Apps).

Another nuance is the notification cache, which means that if the bracelet doesn't sync for a long time, it can forget the current settings.

• 📱 On the phone: Settings → Annexes → Mi Fitness → Warehouse → Clear the cache.
• 🖥️ On the bracelet: reboot it (press the touch button for 10 seconds before vibration).

3. Specific Mi Band 6 firmware bugs and their bypass

Mi Band 6 firmware versions below 1.0.6.54 have a critical bug: the bracelet stops accepting notifications from applications that use Firebase push services (for example, WhatsApp, Facebook Messenger, some banking applications). The problem is related to the change in the data exchange protocol in Android 11+.

Decisions:

• 🔄 Update the bracelet firmware to the latest version via Mi Fitness (Profile) → Mi Band 6 → Firmware update).
• 📥 Reverse to the old version of Mi Fitness: if the update does not help, install the application version 4.6.0 (download to APKCombo).
• 🔧 Manually configure notification channels (for Android 8)+):

Settings → Applications → [Select Messenger] → Notifications → Additional settings → Channels → Enable "Show Notifications"

For iPhone owners, the problem often lies in the limitations of iOS. Apple blocks the transmission of notifications to third-party devices if:

• 🍎 Mi Fitness App is not entitled to notifications (Settings) → Notifications → Mi Fitness → Allow notices).
• 🔒 Do not disturb or focus mode is enabled".
• 📵 Bracelet not added to Bluetooth trusted device list (Settings) → Bluetooth → i (information) → Connect to this device).

4. Conflicts with other applications and services

If notifications don’t come from only certain apps (like VK or Telegram), the problem may be:

• 🚫 Block notifications at the Android level: check Settings → Annexes → [Annex] → Notifications.
• 🛡️ Antiviruses or optimizers (e.g. Clean Master, Avast) that block background activity of Mi Fitness.
• 🔄 Duplicate notification services (for example, if Mi Fitness and Zepp Life are installed simultaneously).

For diagnosis:

1. Close all battery optimizers manually (via Task Manager).
2. Turn off the antivirus for 10 minutes and check if notifications are coming.
3. Remove all fitness tracker apps except Mi Fitness (or Zepp Life if you use it).

If the problem persists, try a test scenario:

1. Install a new app on your phone (e.g., Test Notification from Google Play).
2. Set up notifications for it in Mi Fitness.
3. Send a test alert. If it comes to the bracelet, the problem is in the settings of specific messengers.

Remove duplicate fitness apps (Zepp, Google Fit)

Disable the antivirus/optimizer for 10 minutes

Check the permissions for Mi Fitness in Android settings

Update all messengers to the latest version

Reboot your smartphone and bracelet-->

5. Hardware problems: battery, vibration and sensors

If the bracelet doesn’t vibrate at all (even with a manual test in Mi Fitness), the problem may be:

• 🔋 Discharged battery – at a charge level below 5%, the bracelet turns off vibration.
• 🔊 Faulty motor (frequent problem after falls or moisture ingestion).
• 📶 Damaged Bluetooth module (bracelet connects, but does not synchronize data).

How to check:

1. Vibration test: in Mi Fitness, go to Profile → Mi Band 6 → Vibration and select Test. If the bracelet does not vibrate, hardware malfunction.
2. Charge check: connect the bracelet to charge for 30 minutes, if the indicator does not light up, there is a problem with the battery or contacts.
3. Bluetooth diagnostics:

💡

If the bracelet does not vibrate even after resetting, the vibrate engine is likely to fail, in which case the repair will cost less than buying a new Mi Band 7 (motor price). ~500–800 ₽ + job).

6. Resetting and flashing: extreme measures

If none of the above works, you'll have to reset the bracelet completely, which will delete all the data (steps, settings), but often solve software failures.

1. Open Mi Fitness and go to Profile → Mi Band 6 → Untie the device.
2. On the bracelet, reset: press the touch button for 15 seconds before the Mi logo appears.
3. Re-couple the bracelet through Mi Fitness.

If the reset didn't work, try to re-flash the bracelet manually.

1. Download the latest firmware for Mi Band 6 with AmazfitWatchFaces (Firmware section).
2. Install Mi Band Tools or Notify & Fitness (root rights are required for some features).
3. Follow the firmware instructions (usually put the.fw file in the MiFit/Firmware folder on your phone and run the update through the app).

⚠️ Warning: Continuous interruption of the firmware process can turn the bracelet into a brick. >50% and the phone will not run out during the process.

7. Alternative methods of receiving notifications

If standard methods don’t work, consider workarounds:

• 📲 Bridge apps (such as Tools & Mi Band or Mi Band Master) that duplicate notifications through their own channels.
• 🔄 IFTTT-Applets: Set up automatic rules for sending notifications from messengers to Mi Fitness.
• 📧 Email alerts: Some services (such as Gmail) can send push notifications to the bracelet via Mi Fitness.

Tools & Mi Band setup:

1. Install the app from Google Play.
2. Enable the option to intercept notifications.
3. Select the applications you want to duplicate notifications from.
4. In Mi Fitness, allow Tools & Mi Band to send alerts to the bracelet.

⚠️ Note: Bridge apps can conflict with Mi Fitness and cause double notifications. Test them on non-critical messengers (e.g., Mi Fitness, VK), before setting up for WhatsApp or calls.

FAQ: Frequent Questions About Notifications on Mi Band 6