Xiaomi Redmi Airdots 2: How to charge headphones and case

Why it’s important to charge Redmi Airdots 2 correctly

Xiaomi Redmi Airdots 2 wireless headphones have become one of the most popular accessories due to the combination of price, sound quality and convenience. However, many users face problems: the headphones quickly discharge, the case does not charge the headset or the indicators do not burn as expected, most often these problems are associated with improper charging - both the headphones and the case.

In this article, we’ll take a look at all the nuances of Redmi Airdots 2: charging from basic instructions to hidden functions that aren’t mentioned in the official manual. You’ll learn how long it takes to fully charge, how to understand the indicators on the case, what to do if the headphones don’t charge, and how to extend battery life. And we’ll debunk the myth of “first long-term charge” and explain why it’s harmful to lithium polymer batteries.

Packages and connectors: what you will need for charging

Before you start charging, check if you have everything. Redmi Airdots 2 standard includes:

• 🎧 Two wireless headphones (left and right)
• 📦 Charging case with built-in battery
• 🔌 Cable USB Type-C (length) ~20 cm)
• 📄 Short instructions (often in several languages, but without charge details)

Note that there is no power supply in the box! This is done for savings, but also for your safety - use only certified chargers with an output current of 5V/1A or 5V/2A. Charging from a Xiaomi smartphone, Redmi or any other with similar parameters will do. Charging from tablets (5V/2.4A) is also compatible, but does not speed up the process.

If you have lost a cable, you can use any USB-C from other devices, but it is better to choose a cable that supports USB 2.0 (they are thinner and more flexible than USB 3.0, which may not fit tightly into the case connector).

Charging Indicators: How to Read Case Signals

The Redmi Airdots 2 charge case is equipped with four LEDs that show the battery level of the case and the charging status of the headphones.

The important thing is that the lights only work when you plug the case into the power supply or when you open the lid, and if the case is closed and not connected to the charger, the LEDs don't burn, which is normal, not a breakdown!

To check the charge level of the headphones, put them in the case and open the lid: if the indicator on the headphone flashes red, then they are discharged; if it burns white, the charge is full. In some firmware, the white indicator can flash - this means that the headphones are connected to the phone, but do not charge.

💡

If the case indicators do not respond to the connection to charging, try to clean the contacts with a cotton swab dipped in alcohol.

Step-by-step instructions: how to charge the case and headphones

The Redmi Airdots 2 charging process consists of two steps: first, the case is charged, then the headphones are charged.

1. Connect the case to the power source. Use the original USB-C cable and the power supply with an output of 5V/1-2A. Connect to the socket, powerbank or USB port of the computer.
2. Wait for the case to be fully charged. The indicator will turn green (~1.5-2 hours), and don't interrupt the process, even if the case already shows 80%, which reduces battery life.
3. Place the headphones in the case. Make sure the contacts on the headphones and inside the case match (the headphones should be magnetized to the connectors).
4. Close the case cover. The headphones will start charging automatically. The red light on the headphones will flash until they charge to 100%.

Charging time:

• 📱 Case 0 to 100%: ~1.5 hours to 2 hours
• 🎧 One earphone from 0% to 100%: ~1 hour (if the case is charged)
• 🔋 Full cycle (case) + headphones): ~2.5-30 hours

Make sure the contacts of the case and headphones are clean |Use the original USB-C|Use the power source 5V/1-2A|Close the case cover after placing the headphones |Do not use wireless charging (not supported)

-->

If the headphones are not charging, check:

• 🔌 Correct cable connection (try another connector or power supply).
• 🧲 The position of the headphones in the case – they must “magnetize” to the contacts.
• 🔋 Case charge level (if discharged, charge it first).
• 🛠️ Clean contacts (dust or oxidation can block charging).

Common Mistakes and How to Avoid Them

Many users accidentally shorten the life of Redmi Airdots 2, making typical charging errors.

⚠️ Warning: Never use fast chargers (such as Quick Charge or Quick Charge) to charge a case. VOOC) higher-voltage 5V. This can damage the power controller and cause the battery to bloat.

Error 1: Charging the headphones one at a time. Some users try to charge only one headphone, leaving the second one out of the case. This leads to uneven wear of the batteries - one earphone will discharge faster than the other. Always charge both earphones at the same time!

Mistake 2: Storage of unloaded headphones: If you leave your headphones dead for a long time (a week or more), the battery can go into a deep discharge, and then it will not be possible to restore it. Even if you do not use headphones, charge them up to 30-50% once a month.

Error 3: Using wireless charging. Despite rumors, Redmi Airdots 2 does not support wireless charging (unlike Airdots 3 Pro or Budds 4 models).

Error 4: Charging at extreme temperatures. Do not leave the case charging in direct sunlight or near heat sources (e.g., on a battery). The optimal temperature for charging is 10–35°C. When overheated, the controller can turn off charging and the battery degrades faster.

💡

The most common reason for the headphones to go out quickly is a faulty case, not the headphones themselves. If the case doesn't hold the charge, its battery could fail (the average life is 300-500 charge cycles).

How to extend the life of the battery

The batteries in Redmi Airdots 2 are designed for 300-500 full charge cycles, but with proper care, this time can be increased by 20-30%.

• 🔋 Avoid full discharge (0%) and recharge (100%). Optimal range is 20-80%. If your headphones are 0%, charge them as soon as possible.
• 🔄 Don't keep your headphones on charge longer than you need to. Once you reach 100%, turn the case off the power.
• ☀️ Keep your headphones cool (but not in the fridge!) The ideal storage temperature is 15-25.°C.
• 🔌 Use only high-quality cables. Cheap, thin-wire cables can cause power surges that are harmful to the battery.
• 📵 If you don’t use headphones for a long time, charge them up to 50% and store them in a case with the lid closed.

Another tip: if you notice that the headphones are running out faster, try resetting them.

1. Put both earbuds in the case.
2. Press and hold the button on the case for 10 seconds until the indicator flashes red and white.
3. Open the case cover and wait until the headphones reboot (the indicators go out and light up again).

This procedure resets the Bluetooth cache and can return the original battery capacity if the problem was a software failure.

Frequent problems and their solutions

Even when operated properly with Redmi Airdots 2, there may be problems, and let's look at typical scenarios and how to fix them.

Problem 1: Case is not charging

Reasons:

• 🔌 Faulty cable or power supply.
• 🔋 Case battery out of order.
• 🛠️ Oxidation of contacts in the connector USB-C.
• 🔌 Charging controller damaged.

Decisions:

1. Try another cable and charger.
2. Clean the case connector from dust and dirt (use a wooden toothpick or cotton swab).
3. Connect the case to the power and slightly press the cable in different directions - if charging begins, the problem is the connector.
4. If nothing helps, contact the service center. The cost of replacing the battery of the case is ~ 500-800 rubles.

Problem 2: Headphones are not charged from the case

Reasons:

• 🧲 Incorrect position of headphones in the case (the contacts do not match).
• 🔋 A discharged case.
• 🛠️ Oxidation of contacts on headphones or inside the case.
• 🔌 Failure of the charging controller in headphones.

Decisions:

1. Make sure the headphones are properly placed in the case (they should be "magnetized").
2. Charge the case to 100% and try again.
3. Clean contacts on headphones and inside the case with alcohol or eraser.
4. If one earphone is not charging, try charging it separately by placing only it in the case (sometimes this works).

⚠️ Attention: If after cleaning the contacts, the headphones still do not charge, do not try to disassemble the case yourself - there are adhesive connections inside, and you risk damaging the board.

Problem 3: Fast discharge of headphones

Reasons:

• 🔋 Natural wear of the battery (after 2-3 years of use).
• 📻 Permanent Bluetooth connection (for example, if the headphones are connected to the PC but not in use).
• 🔊 High volume level.
• 🛠️ Software failure.

Decisions:

1. Reset the headphone settings (see instructions in the previous section).
2. Turn off Bluetooth on your phone when you are not using headphones.
3. Turn down the volume – at the maximum level, the battery sits down 2 times faster.
4. If nothing helps, replace the battery in the service center (cost ~300-500 rubles for one headphone).

FAQ: Answers to popular questions