How to turn on Xiaomi Earphones 2 Basic headphones: a complete guide with photos and tips

Why not turn on the headphones Xiaomi Earphones 2 Basic?

Xiaomi Earphones 2 Basic is one of the most popular models in the line of budget audio equipment of the brand. Despite the simplicity of the design, users often have difficulties with the first turn on: the button does not respond, the indicator does not burn, the smartphone does not see the device, the reason usually lies in the wrong sequence of actions or ignorance of the features of the control.

In this article, we will discuss all the ways to enable Earphones 2 Basic, from standard to alternative (for example, if the button is broken), and you will learn how to distinguish between on mode and pairing mode, which is a key point that many people miss, plus tips for eliminating typical errors and answering questions from the FAQ.

If you just unpacked the headphones, don't rush to connect them to the phone. First you need to activate them correctly, otherwise the smartphone will simply not find the device in the list of available ones.

Standard way of inclusion: step-by-step instructions

To enable Xiaomi Earphones 2 Basic, you need to follow 3 simple steps, the main thing is not to confuse the on button with the playback control buttons (they are located on the wire closer to the right earpiece).

Here's what we need to do:

1. Find the power button. It's on the left earpiece (if you look at the Xiaomi logo) and is usually highlighted with a small ledge.
2. Press the button for 3-5 seconds until the blue light light lights up (or the red-blue flashes if the headphones are discharged).
3. Release the button. If the light is even blue, the headphones are on and ready to pair.

If the light flashes blue, it means that the headphones are already in the pairing mode and can be connected to the phone. If the red light is on, you need to charge (more about this in the error section).

Find the power button on the left earphone

Make sure the headphones are charged (the indicator is not red)

Press the button for 3-5 seconds before blue light appears

Release the button and wait for the indicator to burn steadily-->

Importantly, if you turn on your headphones for the first time, they will automatically go into pairing mode. If you turn on them again, you will have to manually activate the pairing mode to connect to the new device (more on this below).

How to distinguish the switch from the pairing mode?

Many users confuse the on-ear and the search mode (pairing mode). These are different states, and they are easy to distinguish by the behavior of the indicator:

If the headphones have already been connected to another device (for example, a laptop), when turned on, they will not automatically look for new devices.

1. Turn on the headphones (clip the button until the blue light is flat).
2. Press the button for another 5-7 seconds until the indicator starts flashing blue.
3. Find Mi Earphones Basic 2 in the Bluetooth list on your phone and connect.

I search for Bluetooth immediately after switching on.

I turn it on first, then I put it into pairing mode.

I use NFC (if any)

I don't know how to do that.-->

If the light flashes red-blue, it's a sign of low charge. Charge the headphones for at least 10-15 minutes, then try again.

Alternative ways to enable (if the button does not work)

Sometimes the power button on Xiaomi Earphones 2 Basic fails, for example, after a drop or moisture, in which case you can try alternative methods:

1. Connecting to charging

If the headphones are completely discharged, connect them to the charger (for example, to Power Bank or the headphones are completely discharged). USB-In 5-10 minutes, they can automatically turn on and pair. This doesn't always work, but it's worth trying.

2. Resetting settings

If the headphones are on but not connected to the phone, reset:

1. Turn on the headphones (press the button until blue light).
2. Press the button for 10-15 seconds until the indicator flashes red-blue.
3. Release the button - the headphones will reset to the factory settings.

3. Use of another device

Try connecting your headphones to another smartphone, tablet or PC. Sometimes the problem isn't with the Earphones 2 Basic itself, but with the Bluetooth settings on the main device (e.g., power saving mode).

⚠️ Warning: If the headphones fall into water or are subjected to heavy mechanical stress, do not try to turn them on - this can lead to a short circuit.

Common Mistakes and How to Avoid Them

Even when you turn on correctly, users are facing problems, and here are the most common mistakes and ways to solve them:

• 🔴 The indicator does not burn when you press the button. → Check the charge (plug in to the USB 10 minutes) or check the button for damage.
• 🔵 Headphones are turned on but not connected to the phone → Make sure your phone is Bluetooth enabled and turn off Invisible to Other Devices mode».
• 📱 The phone can see the headphones but doesn’t connect → Remove the device from the paired list and repeat pairing.
• 🔊 The sound is only in one headphone. → Check whether the plug is tightly inserted into the connector (for the wired version) or whether the headphones are synchronized with each other (for wireless).

Another common problem is that the headphones plug in, but they shut down immediately.

• 🔋 Low charge (charge them to 100%).
• 📲 Conflict with another device (for example, if the headphones were previously connected to the laptop).
• 🛠️ Failure of firmware (will help reset to factory settings).

💡

If the headphones are plugged in but the sound is interrupted, try turning off the Absolute Volume feature on your phone in Bluetooth settings (on Android).

If neither of these methods worked, check the headphones on another device, and if the problem persists, it is likely a hardware malfunction (damaged battery, button or Bluetooth module).

How to check the performance of headphones after turning on?

To make sure that Xiaomi Earphones 2 Basic works correctly, do a few simple tests:

1. Sound check

Connect your headphones to your phone and start the audio file.

• 🎵 Is the sound on both headphones? If not, check the plug or sync. TWS-version).
• 🔊 Volume adjustable? Earphones 2 Basic has buttons +/- on the wire, they have to work.
• 🎶 Sound quality – whether there are wheezing, interference or echoes?

2. Microphone check

Write down a voicemail or call someone if they can't hear you:

• 🎤 Check if the microphone is closed (it is located on the wire closer to the right earpiece).
• 📱 Make sure that Xiaomi Earphones is selected as the input device in the call settings.

3. Connection check

Step 5 to 10 meters away from your phone (for wireless) if you're interrupted:

• 📶 There may be sources of interference nearby (Wi-Fi router, microwave).
• 🔋 Check the charge of headphones - at a low level, the range is reduced.

⚠️ Note: If you are using Earphones 2 Basic with a Windows laptop, you may need to install a driver to properly operate the microphone. download it from the official Xiaomi website or use the universal Bluetooth Audio driver.

💡

If the headphones are unstable, first check them with another device. If the problem recurs, a malfunction in the headphones themselves. If only one device has a problem with the phone/PC settings.

Care and extension advice

To make Xiaomi Earphones 2 Basic last longer, follow the simple recommendations:

• 🔌 Charging: Use the original cable or certified cable USB-cable with a current of no more than 1A. Do not leave headphones on charging for more than 4 hours.
• 💧 Humidity: Avoid water. If your headphones get wet, dry them for at least 24 hours before turning on.
• 🧴 Clean: Clean the speakers and microphone regularly with a cotton swab dipped in alcohol (at least 70%).
• 📦 Storage: Fold the headphones gently, avoiding wire bending at the plug.

It's also worth remembering:

• 🔋 Don't empty your headphones to zero, which shortens battery life. Charge them at 20-30 charge levels%.
• 🎧 Do not use headphones at maximum volume for a long time – this can cause distortion of the sound.
• 🛠️ Do not disassemble the headphones yourself - this will void the warranty.

If you notice that the headphones are discharged faster or are less connected, it may be time to update the firmware (if available for your model).

FAQ: Frequent questions about Xiaomi Earphones 2 Basic