How to set up headphones Xiaomi AirDots Pro 2S: detailed instructions from connection to fine settings

Introduction: Why you need the right AirDots Pro setup 2S

Wireless headphones Xiaomi AirDots Pro 2S — one of the most popular models in the brand line, combining affordable price, high-quality sound and advanced features like active noise cancellation (ANC) and codec support AAC. However, many users face problems already at the stage of the first connection: headphones are not determined by the smartphone, the sound is interrupted or only one headphone is working.

In this article, we will analyze not only the basic connection of AirDots Pro. 2S Android and iPhone, but also hidden features that the manufacturer does not advertise: how to activate low latency mode for games, configure control gestures or update the firmware to fix bugs. Particular attention will be paid to typical errors – for example, why headphones can automatically turn off after 5 minutes of downtime, although the specifications claim 8 hours of autonomy.

If you've just unpacked your headphones or you've already had problems, follow the instructions below. MIUI 14, Android 13 and iOS 16, so we guarantee the relevance of the tips.

1. Preparation of headphones for the first connection

Before connecting AirDots Pro 2S You know, with your smartphone, make sure they're ready to go. A common mistake for beginners is trying to connect to a dead headphone or a device that's already paired with another gadget:

• 🔋 Charge the case: connect it to the power source (use the cable) USB-C) And wait until the charge indicator lights up in white. ~1.5 hours.
• 🎧 Remove the headphones from the case: they must automatically turn on (blitzes red and white indicator). If this does not happen, press and hold the touchpad on each earphone for 3 seconds.
• 📱 Turn off Bluetooth on other devices: If headphones have previously been paired with a laptop or tablet, they may try to connect to them automatically.

If the headphones flash red, it is a low charge signal (less than 10%), in which case the connection may be interrupted after a few minutes, charge the headphones in the case for at least 15-20 minutes before setting up.

⚠️ Warning: Do not use headphones immediately after purchase if they are stored in the cold (for example, when delivered in winter.

2. Step-by-step connection to Android and iOS

The process of pairing AirDots Pro 2S Android and iPhone are different – especially when it comes to Xiaomi smartphones with proprietary firmware MIUI. Below are the general instructions for both cases.

For Android (including Xiaomi, Redmi, POCO)

1. Open Settings → Bluetooth and activate the module.
2. Get your headphones out of the case – they should appear on the list of available devices as Mi True Wireless Earphones 2S.
3. Click on the headphone name in the list. If you request a code confirmation, type 0000 (standard). PIN for all Xiaomi devices).
4. Wait for the message “Connected to media audio” – this means that the headphones are ready to work.

On Xiaomi smartphones, after connecting, the Mi Earphones app will automatically install (if not, download from Google Play), which is necessary for fine-tuning gestures and checking the charge level.

For iPhone and iPad

On Apple devices, the process is a little easier, but there is a nuance with the codec AAC, which provides the best sound quality:

1. Go to Settings → Bluetooth.
2. Get your headphones out of the case and wait until Mi True Wireless Earphones appear on the list. 2S.
3. Click on the name – the connection will happen automatically (without input). PIN-code).
4. To activate AAC, Open the settings. → Bluetooth → i (near the headphones) → Codec of sound and select AAC.

If it's on the codec list AAC No, update your headphone firmware (instructions in Section 5). iOS may also need to reset your network settings (Settings) → Mainstream → Reset → Reset network settings) if the headphones are connected with a delay.

Headphones appear in the Bluetooth list as "Connected"|The lights on the headphones are white (do not blink)|The sound is played synchronously in both headphones.|The Mi Earphones app displays the charge level-->

3. Customization of gestures and controls

AirDots Pro 2S They support touch control, but not all gestures are activated by default. To customize them to your needs, use the Mi Earphones app (for Android) or the standard iOS settings.

Here are the gestures available:

* On iOS, triple tap switches tracks forward by default. To get back, switch your headphones in places (right becomes left and vice versa).

To reassign gestures to Android:

1. Open the Mi Earphones app.
2. Go to Gestures.
3. Select the headphone (left or right) and assign the action to double/triple touch.

⚠️ Warning: If gestures don't work, check if the cover or hair covers the touchpad. Also clean the panel of fat or moisture with a dry wipe.

💡

To quickly switch from ANC In transparency mode, hold the touchpad for 2 seconds, which is convenient in transport or when talking to someone.

Activation of low delay mode (Game Mode)

One of the key features of AirDots Pro 2S — Game Mode, which reduces lag when watching videos or playing games, is disabled by default because it slightly increases battery consumption:

Android (MIUI)

1. Connect the headphones to your smartphone.
2. Open the Settings. → Connected devices → AirDots Pro headphones 2S → Sound settings.
3. Activate the switch Low Delay Mode.

On other Android devices

If you don’t have Xiaomi, use the Mi Earphone app:

1. Open the app and select Sound Settings.
2. Activate the Game Mode option.

iPhone.

On iOS, low latency is turned on automatically when you start games or applications like YouTube/Netflix. If the delay remains, check it out:

• 🔗 Are the headphones connected in mode AAC (not SBC).
• 📶 Are there any interference from other Bluetooth devices (such as smartwatches).
• 🔄 Reboot the headphones (put in the case for 10 seconds and pull back out).

The delay in Game Mode is ~80-100 ms (versus 150-200 ms in standard mode) This is critical for shooters or rhythm games, but almost imperceptible when watching movies.

5. Update to the headphone firmware

AirDots Pro firmware 2S affects connection stability, sound quality and performance ANC. Xiaomi releases updates regularly, but they don't install automatically.Here's how to check and update firmware:

Checking the current version

1. Connect the headphones to your smartphone.
2. Open the Mi Earphones app.
3. Go to About Program - there will be a firmware version line (for example, V1.7.1.0).

Firmware update

If a new version is available, the app will suggest installing it. ~3-5 minutes and consists of stages:

1. Headphones should be charged by more than 50%.
2. Put them in the case and leave the lid open.
3. Click Update in the app and wait until it is completed (don’t close the app!).
4. After the update, the headphones will reboot (the indicators will flash blue).

⚠️ Warning: Do not interrupt the update process - this may cause firmware to fail. If the headphones do not turn on after the update, reset (section 6).

The latest versions of the firmware are corrected:

• 🎵 Problems with synchronizing sound in the left/right earphone.
• 🔋 Incorrect display of the charge level in the case.
• 🎧 Unintentional shutdown ANC loud-mouthed.

💡

Update firmware is the only way to fix bugs with connection to iOS 16+ and activate codec support AAC on new versions of Android.

6. Resetting and problem solving

If AirDots Pro headphones 2S They're unstable (not connected, the sound is interrupted, one earbud is silent), and resetting to factory settings will help.

How to reset

1. Put both headphones in the case and close the lid.
2. Open the lid and hold the touch panels on both headphones for 15 seconds.
3. The indicators are first flashed red, then white-red - this is a signal of a successful reset.
4. Remove the headphones from the Bluetooth list on your smartphone and connect again.

Frequent problems and solutions

If the headphones don't connect after reset, check if the antivirus or power saving mode on your smartphone blocks them. On Xiaomi, add the Mi Earphones app to the Security exceptions.

7. Battery replacement and other upgrades

Average battery life in AirDots Pro 2S — If the headphones start to run out in 1-2 hours and the case does not hold the charge, it is time to think about replacing the battery.

How to replace the battery in headphones

You'll need:

• 🔧 Set of screwdrivers (including T4 and T5).
• 🔋 New battery (e.g., new battery, C103450 for AirDots Pro 2S).
• 🧲 Tweezers and heat-glue.

Step-by-step:

1. Carefully tuck the back cover of the headphone with a plastic spatula (start from the joint place).
2. Disconnect the battery plume from the board (it is glued with thermal glue).
3. Install a new battery, connect the plume and fasten with heat glue.
4. Put the headphone back together.

⚠️ Warning: Do not use superglue - it can damage the board. Thermoclei apply point-by-point, avoiding hitting the speaker or microphone.

Cost of a new battery — ~300-500 rubles. If you are not confident in your abilities, contact the service center (the price of replacement there — ~800-1200 rubles per pair).

8 Hidden functions and life hacks

AirDots Pro 2S They hide some useful things that are not mentioned in the official manual:

• 🎶 Automatic activation when you open the case: If the headphones were connected to the smartphone before, they will switch on and connect to it immediately after extraction from the case.
• 🔊 Level adjustment ANC: In the Mi Earphones app, you can select one of 3 noise reduction levels (Weak, Medium, Strong). ANC work time is significantly reduced.
• 📱 Connect to two devices: Headphones support multipoint (simultaneous connection to a smartphone and a laptop). To activate, connect them first to the first device, then to the second one, without disconnecting from the first one.
• 🔋 Fast charging: 10 minutes in the case give ~1.5 hours of work. Full charge of the headphones takes ~1 hour, briefcase — ~1.5 hours.

Another life hack is the use of AirDots Pro 2S Windows or Mac. That's it:

1. Open the settings. → Devices → Bluetooth (Windows) or System settings → Bluetooth (Mac).
2. Activate Bluetooth and press Add Device.
3. Choose Mi True Wireless Earphones 2S and wait for the connection.

On Windows, you may need to manually install the Qualcomm Atheros driver for stable operation.

💡

To extend the life of the battery, store the headphones in a case at a temperature of 10-35°C and charge them at least once a month, even if you don't use them.

FAQ: Answers to Frequent Questions