Xiaomi AirDots wireless headphones (including the Pro, Pro 2, Youth Edition, 3/3 Pro, and others) have become some of the most popular accessories thanks to a combination of price, sound quality, and functionality. However, even the most reliable appliances sometimes require a reboot: headphones can “glut”, not connect to the phone, give out distorted sound or refuse to turn on at all. 90% of these cases help a full reset to factory settings – a procedure that returns the device to the original settings and “nulls” all user settings.
In this article, you will find step-by-step instructions for all versions of AirDots, including rare models and cases where headphones do not respond to standard commands. We'll also look at why the reset might not work the first time, and what to do if one of the headphones is silent or not synchronized with the pair one after the procedure. MIUI 12+ The iPhone (where the algorithm is different from Android).
When do I need to reset AirDots settings?
Reset Xiaomi headphones to factory state is worth in the following situations:
- 🔌 Headphones do not connect to the phone, although they used to work stably (in the list of Bluetooth devices are displayed as “unidentified” or are not at all).
- 🔊 The sound is interrupted, there are interference, or one earphone sounds quieter than the other (after checking the cleanliness of the speakers and mesh).
- 🔄 The headphones don’t sync with each other (for example, the right connects to the phone and the left doesn’t, or they work as two separate devices).
- 📱 After updating the firmware, lags appeared, headphones spontaneously turn off or ceased to respond to touch control.
- 🔋 The battery discharges too quickly (for example, instead of the declared 4 hours of operation – only 30 minutes), although this has not been observed before.
- 📦 You sell or transfer headphones to a new owner and want to remove all attached devices.
Resetting will not help if the problem is related to physical damage (for example, water entering the housing, falling from a height or oxidation of the contacts of the charging case), in such cases, repair or replacement of components is required.
⚠️ Note: If AirDots 3 Pro or AirDots Pro headphones 2s After reset, no longer recognize gestures (for example, double touch for pause), check the firmware version in the Mi Home application.
Preparation for resetting: what to do in advance
Before you reset your settings, follow a few simple steps to avoid typical errors:
- Charge the headphones and the case. Make sure both headphones have a charge level of at least 30% and the case has at least 50% charge.
- Remove your headphones from your Bluetooth device list. On Android: go to Settings → Bluetooth, find AirDots in the list of associated devices, and click Forget (or Disable). On iPhone: Settings → Bluetooth → the “i” icon next to AirDots → Forget this device.
- Check the physical condition. Clear the headphone and case contacts from dust or oxidation (you can use a cotton swab dipped in alcohol). Make sure the control buttons are not stuck.
If you reset your headphones because of connectivity issues, turn off Bluetooth on all devices they have previously connected to (smartphone, laptop, tablet) and this will prevent automatic pairing during the procedure.
💡
If the headphones don't connect to the phone after reset, try rebooting the mobile device itself. Sometimes the problem lies in the cache of the Bluetooth module of the smartphone, not in the headphones.
Xiaomi AirDots Reset: Universal Instruction for All Models
The basic reset algorithm is the same for most versions of AirDots, but there are nuances for specific models (we will discuss them in the next section).
☑️ Preparing for AirDots reset
- Place both earbuds in the case and close the lid. Wait 10-15 seconds until they turn off (the indicators should go out).
- Open the case cover and remove both earbuds. They should automatically turn on (red or white light will light up).
- Press and hold the touchpad on both headphones simultaneously for 15-20 seconds. AirDots 3 Pro and Pro 2s use a physical button instead of a sensor — press it.
- Wait for the reset signal: 🔴 Headphones 1-Next articleThe Youth Edition and the third generation: the indicators first flash red, then white, and then go out. 🟢 Headphones Pro/Pro 2/3: lights flash red and white 3 Once in a row, then the headphones will turn off.
Put the headphones back in the case
5-10 seconds
If the indicators don't blink or the headphones don't turn off after holding the buttons, repeat the procedure by holding the buttons longer (25-30 seconds).Perhaps the case contacts are contaminated and the headphones don't get enough power to reset.
What to do if the indicators do not respond?
Features of resetting for specific models
Some versions of AirDots have unique reset nuances, and the table below shows the key differences:
| Model | Resetting method | Signs of successful discharge | Frequent problems |
|---|---|---|---|
| AirDots (1st generation) | Hold the sensor on both headphones for 15 seconds. | Red. → white-coloured → shutdown. | After reset, the microphone may not work (reconnection to the phone is required). |
| AirDots Pro / Pro 2 | Hold the physical button on both headphones for 20 seconds. | 3 flashing red-white, then switching off. | If the button is not pressed, check it for sticking (cleaning with alcohol). |
| AirDots Youth Edition | Hold the sensor for 10 seconds, then place it in the case and remove it. | The white indicator flashes 5 times in a row. | Often not reset the first time – repeat the procedure. |
| AirDots 3 / 3 Pro | Hold the 25 sec button (until the beep). | Sound signal + flashing green. | After reset, a firmware update may be required. |
For AirDots Pro 2s and AirDots 3 Pro models, it is recommended to update the firmware through the Mi Home app after reset (Device Profile → Software Update) This will fix possible bugs with gestures or connection.
⚠️ Attention: AirDots headphones SE (The special version for some regions is reset differently: they need to be placed in a case, then hold the button on the case for 10 seconds until the indicator starts flashing orange.
What if the reset didn't help?
If there are problems after reset, check the following points:
- 📲 Update your firmware. Go to the Mi Home app, find your headphones in the device list, and check for updates. AirDots 3 Pro is up to date with 1.7.0.3.+.
- 🔄 Reboot your phone. Sometimes the connection failures are linked to the cache of the Bluetooth module of the smartphone. On Android, you can reset your network settings: → System system → Reset → Resetting Wi-Fi, Mobile Network and Bluetooth.
- 🔌 Check compatibility. AirDots headphones may not work properly with iOS 15 and below devices (especially the Pro models). 2s). Update your iPhone to the latest version.
- 🛠️ Diagnose hardware malfunctions. If one earphone is not turning on or charging, the problem may be in the case contacts or battery. Try to clean the contacts with a wipe (to remove oxidation).
If the headphones still don’t work, try resetting them through the Mi Home app:
- Open Mi Home and find your AirDots in the list of devices.
- Go to the Settings of the device → Additional → Reset to the factory.
- Confirm the action and wait for the procedure to be completed (earphones should flash green).
💡
If the button reset didn’t work, try upgrading your headphone firmware to the latest version – it often solves connectivity and sound problems.
How to connect AirDots after resetting?
After a successful reset, Xiaomi AirDots headphones return to the initial setup mode to reconnect them:
- Remove both earphones from the case. They should automatically turn on (indicators flash white).
- Activate Bluetooth on your phone and find Mi True Wireless Earphones (or a similar name for your model) in the list of available devices.
- Click "Connect." If the system requests PIN-Enter 0000 (default for all AirDots).
- Wait for the synchronization. The headphones should connect to each other (you hear the beep), and then to the phone.
On the iPhone, after you connect, you may notice an “uncertified accessory” — that’s normal for Xiaomi.
If the headphones are connected separately (for example, only the right one), follow the following steps:
- Place both headphones in the case and close the lid.
- Remove them and hold the buttons on both headphones for 5 seconds until you hear the synchronization sound (squeak).
- Reconnect to the phone.
Frequent Resetting Mistakes and How to Avoid Them
Many users experience typical problems when trying to reset AirDots, and here are the most common errors and solutions:
- ❌ They don't hold the buttons long enough. Most models require 15 to 25 seconds to hold them, but many people release the buttons after 5 to 10 seconds when the light is just blinking. Solution: keep track of the time on the stopwatch.
- ❌ Try to reset the headphones separately, reset must be performed simultaneously on both headphones (except if one of them is physically defective).
- ❌ Do not remove headphones from the Bluetooth list before reset.This can lead to an automatic connection during the procedure, which confuses the process.Solution: always follow the "Forget device" step before resetting.
- ❌ They use a non-original charging cable. Cheap cables may not provide enough current to reset properly. Solution: use the original Xiaomi cable or a certified USB-Type-C.
Another common problem is that when you reset, the AirDots 3 Pro earbuds stop recognizing gestures, and that's because when you reset, you reset your user controls, so go to the Mi Home app, select your headphones, and reset your gestures in the Control section.