How much to pump the wheels of the Xiaomi scooter: a complete guide 2026

Xiaomi’s electric scooters have become an integral part of urban mobility, but many owners are not paying enough attention to the important parameter of wheel pressure, which affects not only ride comfort, but also safety, battery life, and tire wear. Incorrectly pumped tires can lead to an increase in energy consumption by 15-20% and a reduction in mileage on a single charge.

In this article, we will look at the pressures in the wheels of Xiaomi M365, Pro 2, 1S, 4 Pro and other popular models, how to measure and adjust pressure, what tools you will need, and what is the risk of under- and over-pumping, and pay special attention to the nuances for different types of tires — pneumatic and cast.

Xiaomi’s official tire pressure recommendations

The manufacturer specifies the optimal pressure for each model in the technical documentation. For most Xiaomi scooters with air wheels (inflatable cameras), the standard value is 35-50 PSI (or 2.4-3.5 bar).

• 📦 Models of the scooter - Xiaomi M365 Pro 2 recommendations differ from Xiaomi 4 Pro or Electric Scooter 3.
• 🏋️ Rider weight – if your weight exceeds 80 kg, the pressure should be increased by 5-10 PSI.
• 🛣️ Type of pavement – for off-road or gravel, it is better to lower the pressure slightly for better grip.
• 🌡️ Ambient temperatures – tire pressure increases by 2-3 in heat PSI, cold-drop.

It is important to understand that the recommendations of Xiaomi are the basic values for the average user weighing 60-80 kg. If you drive aggressively, often overcome curbs or ride on rough roads, the pressure should be adjusted. For example, for the Xiaomi M365, 40-45 PSI is considered optimal, but at 100+ kg it is better to pump up to 50 PSI.

Pressure table on Xiaomi models (2026)

Here are the current recommendations for popular models, based on official manuals and tests by independent experts, and if your model is not on the list, look for the nearest one in terms of wheel size and weight category.

Note that for cast wheel scooters (e.g. Mi Electric Scooter Essential), pressure is not a given, but it requires more careful handling because it does not absorb shocks.

⚠️ Warning: Exceeding the maximum permissible pressure (usually indicated on the sidewall of the tire) can cause the camera to rupture or the tire to break off the rim. For example, for most Xiaomi wheels, the maximum pressure is 65. PSI, But pumping to such a value is strictly not recommended.

How to check the pressure in the wheels of the scooter

To measure the pressure, you'll need a pressure gauge.

• 🔧 Manual pressure gauge – inexpensive and accurate, but requires skill.
• 📱 Digital pressure gauge – convenient for regular checks, shows pressure with an accuracy of 0.1 PSI.
• 🚗 Car compressor with pressure gauge – suitable if you have access to such equipment.

Instructions for verification:

1. Remove the protective cap from the nipple (nipple) of the wheel.
2. Press the pressure gauge tightly against the nipple and record the readings.
3. If the pressure is below normal - pump the wheel, if higher - blow the air by pressing the pin of the nipple.
4. Repeat the measurement after adjustment.

Nippels on Xiaomi scooters are usually Schrader type (like cars), but some models may use Presta (bicycle standard).

💡

If you don't have a pressure gauge, you can use a free gas station or cycling station check, and many service stations offer this service for a nominal fee or even free of charge.

What threatens the wrong pressure in the tires

Both under- and over-inflated wheels have a negative impact on the performance of the scooter. Let's take a closer look at the implications.

Pressure's too low.

• 🔋 Increased energy consumption – soft tires create more resistance, resulting in a 10-20 mileage reduction%.
• 🚨 Risk of a snake bite – when hitting a sharp object (such as a nail), low pressure increases the chance of a double puncture of the camera.
• 🛑 Deterioration of handling - the scooter becomes "sluggish", worse keeps the trajectory on the corners.
• 🔥 Overheating of the tire - with a long ride on flat wheels, rubber can overheat and collapse.

Pressure is too high.

• 💥 Risk of camera rupture – especially dangerous in heat when pressure is increased.
• 🛞 Shock load on bearings - hard wheels are worse cushioned, which accelerates wear of the nodes.
• 🚵 Uncomfortable driving - every bump and crack in the asphalt is given to the hands and feet.
• 🛑 Decreased traction – reduced spot of contact with the road, which is dangerous on wet surfaces.

💡

Optimal pressure is the balance between comfort, safety and energy efficiency: check the wheels regularly (every 1-2 weeks) and adjust the pressure depending on the driving conditions.

How to pump the wheels of a Xiaomi scooter: step-by-step instructions

You'll need a pump to pump the wheels.

• 🚲 Bike pump (manual or foot) with a manometer.
• 🚗 Car compressor – convenient if you have access to a socket or lighter.
• ⚡ Electric pump for scooters - compact and fast option.

Step-by-step process:

1. Make sure the nipple is clean – wipe it with a cloth so that dirt does not get inside the camera.
2. Remove the protective cap and check the current pressure with a pressure gauge.
3. Connect the pump hose to the nipple. For Schrader, just put the head on and lock it with a clamp. For Presta, first unscrew the little nut on the top of the nipple.
4. Pump in short jerks, periodically checking the pressure with a pressure gauge.
5. After reaching the desired value, quickly remove the pump, close the nipple with a cap.

If you pump a wheel, blow the extra air by pressing the pin in the center of the nipple (for example, the back of the cap or a thin object).

Features for different types of wheels

Xiaomi Samokats are equipped with two types of wheels: pneumatic (inflatable) and cast (all-wheeled).

Pneumatic wheels

This is the most common option for most models (M365, Pro 2, 4 Pro).

• 🔄 Good depreciation – smooth out the roughness of the road.
• ⚡ Low rolling resistance – higher energy efficiency.
• 🛡️ Resistance to punctures (at the right pressure).

However, they require regular maintenance: pressure checks, puncture checks and tread wear, with an average life of 2,000 to 3,000 km when properly operated.

Cast wheels

They're installed on budget models like the Mi Electric Scooter Essential.

• 🛠️ No need to pump - no risk of puncture or descent.
• 💰 Low replacement cost.
• 🔧 Ease of maintenance.

Cons:

• 🚫 No depreciation – all blows are transferred to the frame and hands.
• 🛑 Worse grip on wet or slippery surfaces.
• 🔥 Rapid wear of bearings due to increased vibration.

If you have a scooter with cast wheels, you can compensate for the lack of depreciation using depreciation handles or a pneumatic fork (if the design of the scooter allows it).

Seasonal pressure adjustments

Tyre pressure depends on ambient temperature, and according to the laws of physics, when you change the temperature by 10°C, the pressure changes by about 1 PSI.

• ❄️ In winter, the pressure in the wheels drops. PSI upon +20°C, then at 0°C it's gonna drop to 40-42. PSI.
• ☀️ In the summer, the pressure rises. PSI upon +30°C can turn into 48-50. PSI.

Seasonal recommendations:

• 🍂 Autumn/Spring – Check the pressure once every 2 weeks, as temperature changes are frequent.
• ❄️ Winter – pump the wheels 2–3 PSI It is better to reduce the pressure more than recommended, as the cold will reduce the pressure, and also consider that on snow or ice it is better to reduce the pressure slightly for better grip.
• ☀️ Summer – do not push the wheels to the upper limit of normal, as heat can bring pressure to critical. PSI Xiaomi M365).

⚠️ Warning: If you keep a scooter in an unheated room (balcony, garage), the pressure in the wheels in winter can drop to dangerous values!

FAQ: Frequent questions about pressure in the wheels of the Xiaomi scooter