Xiaomi has long been known for its innovative home gadgets, and the Mijia Rechargeable Lint Remover is no exception. It is a compact battery-powered device that solves the problem of sunsets on clothes, furniture and textiles in minutes. However, many users are asking questions about how to turn the device on correctly, what modes of operation are available and how to avoid typical errors when used for the first time.
In this article, we will discuss the process of activation of the device, the nuances of charging, and give practical tips for operation, especially focusing on hidden features that are not written in the standard instructions, but which greatly simplify the care of things. If you just bought Xiaomi Mijia Lint Remover or are planning to buy – this guide will help to avoid common problems and use the gadget as efficiently as possible.
Xiaomi Mijia Rechargeable Lint Remover
Before you go to the instructions for switching on, you should familiarize yourself with the key parameters of the device, which will help you understand its capabilities and limitations.
| Characteristics | Meaning |
|---|---|
| Type of food | Built-in lithium-ion battery 700 mAh |
| Charging time. | 2–3 hours (via USB Type-C) |
| Autonomy | Up to 90 minutes of continuous operation |
| Rotation speed | 3200 rpm (adjustable) |
| Weight. | 180g |
The device is equipped with two interchangeable knives for different types of fabrics: standard and delicate. The body is made of matte plastic, resistant to scratches, and the ergonomic shape allows you to comfortably hold the machine with one hand. It is important to note that the Mijia Lint Remover works almost silently - noise level does not exceed 65 dB, which is comparable to quiet conversation.
One of the key features is that it automatically shuts down when inactive for more than 5 minutes, which not only saves battery life, but also improves safety, but it sometimes confuses new users who think the device has broken.
How to turn on Xiaomi Mijia Lint Remover: step-by-step instructions
The process of activating the device is intuitively simple, but has several nuances. Follow this instruction to avoid errors:
- Check the battery. Before you first turn on, make sure the device is at least 30% charged. The charge indicator is located on the sidebar - if it flashes red, the machine must be connected to the network.
- Install the knife. There are two knives in the kit: standard (for cotton, flax) and delicate (for wool, cashmere). Carefully insert the chosen knife into the groove before the click. Do not put excessive effort - this can damage the mount.
- Activate the device. Press and hold the power button (located on the top panel) for 2-3 seconds until the white indicator lights up. If the indicator flashes red, the battery is dead.
- Select mode. With a short press on the same button, you can switch the rotational speed of the knife: 🔄 One press – minimum speed (for delicate fabrics). 🔄🔄 Double press – average speed (universal mode). 🔄🔄🔄 Triple pressing – maximum speed (for dense tissues).
If the device does not respond to the press of the button, check:
- 🔋 Is it connected to charging (the indicator should burn red when charging).
- 🔌 Is the cable intact? USB Type-C.
- 🛠️ Is the knife correctly installed (with loose fixation, the machine blocks the switching on).
Make sure the battery is charged.|Install the right knife|Check the blades clean.|Wear a protective cover over the fabric (for delicate things)-->
Common Errors When Enabled and How to Avoid Them
Even with a simple device like the Xiaomi Mijia Lint Remover, users are faced with typical problems, and let's look at the most common ones and how to solve them.
⚠️ Attention: If the machine suddenly shuts down while running, it may be due to overheating.Let the device cool down for 10-15 minutes before re-energizing.Operating at high temperatures shortens battery life.
Problem 1: The device is not switched on.
- 🔌 Reason: A discharged battery or faulty cable.
- 🛠️ Solution: Connect the machine to the original charger (current) 5V/1A) and wait 30 If the light doesn't light up, try another cable.
Problem 2: The knife doesn't rotate, but the indicator is on.
- 🔄 Reason: The knife is installed incorrectly or blocked by tissue fibers.
- 🧹 Solution: Remove the knife, clear the groove of the threads, and re-set it. Make sure the lock is snapped.
Problem 3: The machine is running in thrusts.
- ⚡ Cause: Low battery charge or clogging of blades.
- 🔋 Solution: Charge the device to 100% and clean the knife of wound fibers with a brush from the kit.
If none of the tips helped, perhaps the battery or engine is faulty. In this case, we recommend contacting the Xiaomi service center - self-repair can lead to a loss of warranty.
What to do if the machine makes an unusual noise?
How to use a machine for reels: advice from experts
To Xiaomi Mijia Lint Remover lasts a long time and effectively cope with the task, follow these recommendations:
Preparation of tissues. Before processing:
- 🧺 Stretch the thing on a flat surface (table, ironing board).
- 🧼 Make sure the fabric is dry and clean – wet fibers can wind on the knife.
- 👕 For delicate things (cashmere, mohair) use a protective net from the kit.
2. Propulsion technique: Hold the machine at an angle of 15-30° to the surface and move it in the direction of the pile, not against it. This reduces the risk of tissue damage. For dense tissues (jeans, coats), you can increase pressure, but without excessive pressure.
3.Knives care, after each use:
- 🧼 Clean the blades with a brush from the kit.
- 💧 Wash with an alcohol wipe for disinfection.
- 🔪 Keep knives in a protective case to avoid blunting.
Charging and storage to extend battery life:
- 🔋 Do not leave the device on charge for more than 4 hours.
- 🌡️ Store at a temperature of 10–30°C, avoiding direct sunlight.
- 🔌 Use only the original cable. USB Type-C.
💡
To remove the coils from large things (foam, bedspread), use the maximum speed and treat the surface in sections starting from the top edge, which will prevent the fibers from rolling into clumps.
Comparison with analogues: why Xiaomi Mijia is better?
There are many reel removal machines on the market, but the Xiaomi Mijia Rechargeable Lint Remover features several key advantages:
| Criteria | Xiaomi Mijia | Budgetary analogues (for example, Philips GC026) | Premium analogues (e.g. Braun FS1000) |
|---|---|---|---|
| Type of food | Battery 700 mAh | AA batteries or network adapter | Battery 1000+ mAh |
| Autonomy | 90 minutes. | Limited by battery capacity | 120 minutes. |
| Noise level | 65 dB | 70-75 dB | 60-65 dB |
| Complementation | 2 knives + brush + case | 1 knife (additionally purchased) | 3-4 knives + accessories |
| Price (2026) | ~2500–3500 ₽ | ~1500–2000 ₽ | ~5000–8000 ₽ |
The unique advantage of Xiaomi Mijia is the combination of price and functionality: there is a battery, and speed adjustment, and quiet operation, which is rarely found in the budget segment. Premium analogues (for example, Braun) offer more power, but their cost is 2-3 times higher with a similar set of functions.
Another plus is the Xiaomi ecosystem, where if you already have a brand’s devices (like a robot vacuum cleaner or a smart lamp), the reel machine will fit seamlessly into your collection, and the Mijia Lint Remover is compatible with the Mi Home app (in some regions), allowing you to track charge levels and get maintenance reminders.
Frequent questions about Xiaomi Mijia Rechargeable Lint Remover
We have collected the most popular user questions and provided detailed answers to them.
Can I use a machine to remove the coils from furniture?
How long does it take to fully charge?
How often do you need to change knives?
Can I wash my car underwater?
Is the device suitable for cleaning wool items?
💡
Regular cleaning of knives and the correct choice of rotational speed prolong the life of the device and improve the quality of removal of the coils.
Where to buy and how not to run into a fake
The original Xiaomi Mijia Rechargeable Lint Remover is sold in the official stores of the brand, on AliExpress sites (from trusted sellers), as well as in large electronics chain stores (M. Video, Svyaznoy, Citilink). However, there are many fakes on the market that are similar in appearance, but inferior in quality.
- 📦 Packaging: The original has a branded box with the Xiaomi logo, hologram and barcode. the package must contain instructions in several languages (including Russian).
- 🔍 Design: On the original device, the Mi logo is engraved on the body rather than pasted.The power button has a matte coating rather than a glossy one.
- 🔋 Charging: Counterfeiting is often equipped with a Micro-USB cable instead of a micro-USB cable USB Type-C: Original Charges Only Through Type-C.
- 💰 Price: If the cost is significantly below 2500 ₽, The average price of the original is 2,500-3500. ₽ (2026).
When buying on AliExpress, pay attention to the seller's rating (at least 98%) and reviews with a photo.
- 📝 The Mijia Rechargeable Lint Remover (LYJ01ZM).
- 🔢 Articulum: LYJ01ZM or XMSH05HM.
- 🏷️ Certificates: CE, RoHS.
⚠️ Warning: Counterfeit products often break down after 2-3 months due to poor-quality batteries and plastics, and they can overheat during operation, which creates a risk of fire.